Reviews
Note that the fit is different from the Image photo!
Please note that the delivery is different from the product photo!
The Installation Instruction Manual also includes a photo of the actual installation so the Shield does not come to the top of the Light and will be installed with the previous Shield on.
I don't think it is worth $30,000!
View detail
Fits: BMW R 1200 ADVENTURE, BMW R 1200 GS, BMW R 1250 GS, BMW R 1250 ADVENTURE
dirty management
The tip is missing and unusable. 20,000 is Garbage. View detail
Cannot be installed due to wrong Bolt
Why didn't you check Bolt twice? I could not install it today. I didn't think it was wrong.
The bottom of the Bolt is supposed to be forward and the top inverted, but the Bolt enclosed for installation had the bottom forward and the Mirror side inverted.
View detail
_TS.jpg)
$550 CAD ($60,000 JPY)!!! with shipping? That is absolutely insane for a cluster shield!.
It's disingenuous to call this a windscreen. Am I missing something? Even direct from Honda you can buy FOUR STOCK covers for the price of one of these! You can actually buy functional windscreens online for less than $25. $550CAD? $60,000JPY? Smoking crack!! Unbelievable brands like this absolutely sullies Webike's reputation. I shop at Webike less because they waste my time as a consumer, not filtering out trash and scams like this. View detail
Is it really for SV650?
To begin with, I don't think the Bolt holes and angles match the SV Meter cover. I barely managed to force it on with much difficulty, and it will probably not last long enough to come off. I think some people might have given up on installing it. It is an expensive product and I wish they had designed it seriously.
If it can be installed properly, the design is the best among Screen's many wildly different products.
View detail
![Windshield [Sports Touring]](https://img.webike-cdn.net/catalogue/images/82256/ST_TS.jpg)
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
R is so tight that it cracks.
As shown in the title, the R is too tight and the screw hole position does not fit.:Pair (for Left and Right) The Bolt hole in the middle cracked. I would like to return it if possible. The price is reasonable and I would like to have it exchanged or returned for gold. If you are considering purchasing this watch, you might want to bend it in the bathtub a little before installing it like a windshield.
Added on 11/01/2023
Currently checking with Customer Support and suppliers.
View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
R is too tight and cracked.
As shown in the title, the R is too tight and the screw hole position does not fit.:Pair (for Left and Right) The Bolt hole in the middle cracked. I would like to return it if possible. The price is reasonable and I would like to have it exchanged or returned for gold. If you are considering purchasing this watch, you might want to bend it in the bathtub a little before installing it like a windshield. View detail
The claw on the tip broke off during installation.
The claws on the tip of the device are broken as shown in the picture, even though all you have to do is to finger-load the 3 claws and attach 4 screws on the tip. The reason why I asked for the spec. is because I applied for a return request as a defective product, but received no response and asked me to write an imprementation. I am disappointed that I got the worst product. View detail
![Screen [Double bubble]](https://img.webike-cdn.net/catalogue/images/99472/16-135-02_TS.jpg)
I think it's defective...
I did not feel that the windshield was dramatically better than the OEMScreen. Also, I could hear quite a bit of Chatter noise while driving!
Prior to that, there are questions about product quality issues and Manufacturer response.
There was one raised bump-like area about 8mm in diameter at the border between Cowl and Screen.
According to Manufacturer, if the product does not have problems running, it cannot be exchanged or returned.
According to Shop, where we purchased and installed the product, there have been various other quality issues.
I just pulled a HaGap, but for those who have pulled it, I would not want to buy such a Manufacturer's product again.
View detail
![[NATIONAL CYCLE:National Cycle]Vstream Windshield](https://img.webike-cdn.net/catalogue/images/75533/16971_TS.jpg)
Fits: HONDA PCX150, HONDA PCX
Parts that give Damage to the vehicle body
The resin inside the Screen had melted when it was parked outside during the summer days.
I think the light has been focused like a magnifying glass just at the point where the Screen's Curve becomes tight.
It is a design flaw.
View detail
![[NATIONAL CYCLE] VStream Windshield](https://img.webike-cdn.net/catalogue/images/116615/16969_TS.jpg)
Short is no good.
Short does not protect from wind at all, I would rather not have it.
Design is bad or rectification is the worst.
You will regret buying it.
Installation was easy
View detail
![[Powerbronze] Sports Air Flow Windshield](https://img.webike-cdn.net/catalogue/images/109930/400-S141-001a_TS.jpg)
The mounting holes are small.
[How is it used?
Touring。
Was the one you received as per Image?
It looks good
Was the installation difficult?
The mounting holes needed to be machined.
How was your experience with it?
So-so
View detail
Fits: KAWASAKI NINJA400, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA400 (2014-), KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400
No change.
No change at all.
No change at all.
No change at all.
View detail
Mounting Bolt does not fit
I tried to install it on a CROSS CUB JA60, but the Bolt does not match the holes for the Mirror marks when attaching the Bracket!
The Mirror is an Opposite Thread Screw, but the packaged screw is a Normal Thread Screw, which must be purchased separately.
So I don't think the product is compatible with JA60.
View detail
Not enough parts.
When you try to install it, you will see that Bolt has a Quantity:It was 2pc short.
I've been waiting a long time now, so the return is good,
You can buy Bolt at Home center.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09
MT-09 Fly Screen
first impression
BALI is on a thin line at the edge of the product (Screen periphery).
It is unclear if BALI processing is not done or if the Level of molding is low.
The product's Smallish Wound stands out in several places.
There is a kind of Wound at the time of molding and a post-Wound.
The packaging and wrapping were well done.
I previously purchased a Screen from Pooch.
There was no such Wound at all.
As an OEM parts of Yamaha, this product is sold at this price.
It is not acceptable.
The four bolts (hexagonal) for attaching the Screen are exterior parts.
It looks like a very ordinary one sold at Home center.
If they are selling at this price, they need to improve the quality.
(I installed it as is because it is a hassle to return, exchange, etc.)
The design of the Motorcycle was developed at the same time as the actual car.
The shape and large size are very well designed without any loss in quality.
anti-wind effect
I was in NORMAL condition, winded from the stomach up.
Level that receives wind from the chest up after installation.
Windproofing effect is not as high as expected, but given the length of the Screen
No particular complaints as it is expected.
General review
The bad thing for the price is that it leaves a large impression and is a very disappointing product.
View detail
I purchased the wrong one.
I purchased the wrong product. View detail
![Windshield [Double Bubble] HYBRID M1](https://img.webike-cdn.net/catalogue/images/99472/16-135A2-02_TS.jpg)
Distortion generated in the manufacturing process
The edge bend was distorted and the surface was rough and white.
I was told that they would exchange the product for a more beautiful one if they had it in stock, but I thought it was Out that they were shipping this level of product in the first place.
Screen shape of New Model GSX1300R HAYABUSA (R of the edge is too tight) is it difficult to process?
As expected of US Specification, I have used MRA on my Motorcycle until now and this has never happened to me.
Unfortunately, this time we did not use it and had to deal with the return.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-R125
impossible to install
I can't talk about it because it doesn't stick where things are supposed to stick. View detail
![[Powerbronze]Sports/FlipScreen[Long]](https://img.webike-cdn.net/catalogue/images/110516/420-Y172-001a_TS.jpg)
Chatter sound is terrible and unusable.
I do not trust ODAX products in general, but there were very few custom parts for the New ModelTMAX, so I had no choice but to choose this one. As I expected, the chatter sound during driving was so bad that I contacted the manufacturer once and was treated as a complainer. I contacted the manufacturer once and they treated me like a complainer and made me feel uncomfortable. No Chatter noise at all while driving. I should have bought the WRS one from the beginning. View detail