Reviews
More than the price
Purchased for SUPER CUB110 (JA59).
Machining accuracy is quite rough. (Sweat)
But I was able to install it without any problems,
ShieldBody was Beauty when the protective film on both sides was removed.
It is good to keep the wind out of the room.
I am Large satisfied with this price.
View detail
Bolt is highly universal and can be used for various purposes other than Screen.
[How is it used?
I purchased the OEMPin that holds Screen to Cowl because it was getting tired with age, but I had a few left over and decided to use them for another purpose.
Was the one you received as per Image?
The product was just as bright Blue alumite as the image in Webike's product introduction section, and the color was exactly as shown in the Image with almost no difference in color.
Was the installation difficult?
When used for Screenetc., the OEM fixed pin (Rivet?) may need to be removed depending on the car model.
It takes some time to remove the OEM parts that are not Bolt type.
Once you have finished removing it, it is easy to fix using this product.
If you simply want to use it as a 5mmSize Bolt, it is even easier to simply replace it with the part that uses the OEM 5mmSize.
How was your experience with it?
Although not much time has passed since I started using it, I have not seen any fading, which is common with anodized dyed products.
Since it is a 5mm size bolt, it is not used often except for the Screen, but since a 5mm bolt was used as part of the exterior fixing of the Little Cub, the extra bolt was used to fix it in place.
Since the material is aluminum, it is not suitable for places where high additions are applied, but it works well enough for places where the exterior is fixed.
[Included Parts:were they on?
Material:Bolt of Aluminum with 2 Washers of Nylon and Well nut Quantity:Set contains 10 pieces.
[Was there anything that disappointed you?
If you can use it as described above, you can save money because there is a surplus even if you use it for screen depending on the type of car.
Other items that would be helpful
Point and hang of installation
Unlike steel or Stainless Steel, Aluminum is a soft material. When tightening or unfastening, insert the Hexagonal Wrench firmly and work carefully.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
Bolt and Nut's Quantity in a nutshell.:It is a Set, a very straightforward product.
[Notes]
As I said above. Proper Torque Management with Proper Tools." Anodized dyes and anodized dyes will inevitably fade under ultraviolet light, so if the dyes are not to be used for a long period of time, it is advisable to cover them with a body coverretc. to cut the UV rays.
[ITEMS TO BUY TOGETHER
If you want to use it to fix the screen when replacing the screen, use a new screen; for other uses, use a new screen. . the goods that will be required for its use." at the same time, you can save on shipping costs.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible as it is easy to use.
View detail
Screen bolt
I think it looks good.
However, the Black paint was bald when I installed it, so I fixed it with Touch pan.
View detail
Easy to use
I bought this for Screen bolt's Spare.
It is painted so it will not rust and is of the same etc. or better quality as OEM.
If the quantity isQuantity:1 Set of 10pcs. included a Hexagonal Wrench, so installation was no problem.
View detail
The shade is Beauty, but ……
I bought it from NORMAL, colorless BlackNut to One point Accent.
I only use 4 MC41's, so I'm not sure if I'll be replacing them for a few years………, but I'll be replacing them in less than a year.
The reason was the fading of Anodized.
At first, it was a deep gold color, but after one summer, it became a pale Lemon color.
It comes in a pack of 9, so I replaced the extra 4 this spring, but they started to fade again after this summer.
There is nothing wrong with it functionally, and considering the price, I don't see why not.
By the way, only Bolt was used in 41.
View detail
For spare parts
I got this for both Screen bolt and Cowl spare. The paint is very clean and the quality is as good or better than OEM. The quantity is Quantity:1 Set of 10pcs. and Hexagonal Wrench is also included, I think it is a good value Gold amount. View detail
It's good for Racer replica.
Shop etc., but the product itself is the same only by the difference of the selling company. Shop, but the product itself is the same. I licked my head using the Hexagonal Wrench that came with it. For the GJ21A, I only used the Bolt and not the Rubber BushNut (because it looks weird). View detail
It was a lighter gold color than the picture.
Quantity:1 Set of 10pcs. and comes with Nylon washer and RubberNut.
In terms of length, it was an Exactly Size for the Screen fixation of GPZ900R.
Excess Quantity:2pc. Set is used to connect the inner cowl to the front cowl.
This one was also perfect for the length and the ease of use of RubberNut.
There was nothing wrong with it functionally, but the color of the Anodized
The only thing I regret is that it was a bit pale gold, unlike the picture.
View detail
Cheap prices!
It's a good first Custom because it's cheap and it looks, well, completely different.
Also, it would have been nice if the Bolt was a little longer.
View detail
I only use Bolt..
I used the Bolt only because the Bolt was a little less than I thought it would be (That's my own miss-take, I didn't use Walnut.)
Since the Bolt of OEMNORMAL has deteriorated because of the resin, it has been changed to Aluminum I made it into Bolt
I think that the texture is not bad, but the diameter of the bolt is a little more for the bolt hole of Screen I think it would be better if it was large and low in height
I managed to fix it in place, so the result was unexpectedly good I was able to secure it just right and securely with Color and Nut
It's probably more light-resistant than the resin OEM Normal bolt, and it looks newer and more natural But I thought it was a small part, but it was a little newer than I thought it would be I think it's a good idea
View detail
Screw is short for Africa Twin's Shield
Nut did not have any problem. Just Screen Length was 5 mm because Screen was thick.
The remaining Dress-upBolt will be diverted to others.
View detail
It is largely satisfactory.
Bolt's color is brilliant and beautiful.
I did not like the color of PlasticWasher because it was transparent, so I used OEM's BlackWasher.
Rubber's Well nut did not engage in the hole of Upper Cowl, so I used OEM's PlasticNut.
Bolt is Material : Because it is Aluminum, it feels a little fragile.
View detail
Things and shapes of NHRC "Only" Is same
Installed on SUPER CUB 110 JA 10
Previously attached by NHRC company, included Partsetc. Together with you
While that was a Large satisfactory screen, I was wondering why it is so cheap ...
Purchase at once
Bracket and Bolt are Silver colors, but they were painted black with LacquerSpray
I was going to repair it with an oil pen when it was peeled off, so I just applied it properly and painted it (Lol)
Quantity : 1pc. It looks like a good eye image
I think that you can see that the screen surface is cloudy in the second image
And the surface does not have a smooth surface
It is a feeling like a yuzu skin when painting
It is said that it is a color like Olato used for Bunan candy or it is called muddiness ...
Coupled with it and this yuzu skin ...
Night driving is quite dangerous ...
Light is irregular reflection, visibility is bad
Since this screen has height, visibility almost exceeds this screen
Meanwhile, the visibility of Yuzu's skin + oblate-like Screen is not very rainy, but it can not bear practical use
I was looking forward from the top of the screen stretched back to my back
Although it seems that it does not seem to be Large when it is an image, since it is normal Screen that it is originally possible to see the other side to Clear ...
I immediately removed it and changed it to Middle Screen of Asahi Dashu.
Asahi windshield's Middle Screen will also raise Impre so please refer to that image ...
Short cut it for use for processing, or if there is still a way of using it still wonder ...
Do not make it look over the screen, use it as a Short Screen, Visor, ...
Although I thought that it would be good if we treat the surface with 2000 number - liquid Compound etc ...
Indeed it is a bit of a thing to do so, and ...
Only in the daytime, do not ride on rain, only short distance
I think that it can be used even if it is ...
When it is used on a daily basis, practicality is almost none
Do not expect it as windshield and buy it
Let's buy NHRC's things, Asahi windshield, HondaOEM
It is late after accidents occurred
View detail