Reviews
Performance Expectations
The OEM wanted a longer Screen because it felt like the wind hitting the Helmet was swirling around my chest. [Color] Since it was clear and with color, and since we are thinking of installing a handlebar riser in the future, we decided to go with this product because it was slimmer than other manufacturers and there was word of mouth on a certain site that it is difficult to interfere with the handlebar when it is cut off. The length was +7cm compared to OEM, but it seemed to be measured at the largest length of each, and there was about +11cm at the center position where it was actually installed. Although I have not actually driven the car due to poor weather conditions, I can expect that the wind will have much less effect on the car. View detail
Good
I had a Puch Screen on a 2008 SB I used to own. I remember that I had a Large change difficulty installing it back then, but I guess the accuracy has improved, and it went on easily on the 2018 model this time.
I chose Dark smoke and am satisfied with the way it looks.
View detail
Genuine Puig Racing Screen for GSX1300R 2006
Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this blue versionto match with their bike colour scheme. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days from being shipped. The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need during fitment and for the screen not to be buffetted too much by wind. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a blue screen with a gradiented smoked area at the bottom near the instrument cluster. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: HONDA REBEL500(CMX 500), HONDA REBEL250(CMX 250), HONDA Rebel300
Genuine Puig New Generation NK Sport Screen for Rebel 300
This was a purchase a customer asked me to source for them to add to their Rebel 300 which they wanted a different screen than the one they already had fitted. This one is more of a retro look and gived the bike a better stance on the road. The custoemr had already sourced the correct part number for their bik so I did not need to do any research. Great stuff. The cost of this screen was a bit better than I could source locally, besides I already had a few parts in my basket that needed placing. I got them all shipped with EMS and the delivery took like 5 days from initial shipping from Webike warehouse. I have to say again, Webike warehouse really know how to pack items correctly and with the amount of packing involved, there is no way this screen or any of the other parts were going to get to me other than in 100% perfect condition. Well done Webike warehouse. So, this screen also comes with all the accessories needed to fit to this model of bike. No need to have to find a kit to do this as it comes in the box. The screen itself is gorgeous dark smoke and the clarity of the screen is perfect. It was a breeze to fit as everything fitted precisely as it should. This bike now looks a million dollars. One very happy customer. Thanks a lot Webike. View detail
Looks like OEM.
To install, simply remove the two screws, put them on, and tighten the two screws again.
It's very simple
Design as if it were OEM.
I still feel that the design of Mt series is completed by adding Shield.
View detail
Perfect windscreen
I was trying to decide on a windscreen for a couple weeks. I chose this Puig and am so glad I did! Not too small, not too big. 40°F at 45mph, I was very comfortable. I could not be happier with the look, fit, functionality. No turbulence around helmet or rattle / vibrations. 10/10 View detail
Touring Essential Items
I thought I knew what Screen could do, but once I installed and experienced it, there was no going back.
Without the screen, the 100 km/h acceleration on the freeway was an ordeal of constant struggle against the wind pressure on my body,
When the Screen is installed, the wind pressure on the body is much lessened even when accelerating at 100 km/h, of course, or even when overtaking.
The effect is immensely Large, even though it looks like a small difference!
In my personal opinion, I chose Puig's Screen out of the many available because I liked it the best.
Installation can only be done once after the Screen has been loosened, but it uses only common tools and does not require high maintenance skills.
I think the price is a little high, but I think it is cost effective.
View detail
The top edge comes up to my eyes and bothers me a little.
I have been using Puch's Screen since the nc750x on all my cars and am comfortable with the quality. The wind tunnel tests have been done, so the effect is perfect. The wind is blowing over the helmet. The screen is also equipped with a hand guard, so the wind does not hit my hands. However, the upper edge of the screen is just above the eyes, which is annoying. It is hard to see at night even through light smoke. 173cm average body type should be prepared for this. View detail
Installed on MY2021 StreetTripleRS
After wearing this, the wind has less effect on my upper body below the helmet, and I feel less tired even when driving at high speeds.
It looks a little silly, but it's functionality is important, so it's a TradeOff.
The only drawback is that the mounting points are bolted together with other plastic parts and the quantities are the same as other plastic parts.:Pair (for Left and Right) Since each part is supported in one place, the resin parts move together with the Screen base when there are bumps in the road, such as uneven surfaces. "Clatter." The sound is heard when the unit is installed. We are planning to stop the sound soon because it is an unavoidable part of the structure, but over 20,000 yen....
View detail
Genuine Puig Touring Screen Clear for XT1200Z SUPER TENERE 2016
They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Genuine Puig Dark Smoke Screen
A few customers have had these brand of screens. Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this dark smoke version. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape the entire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a dark smoke screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
I think it works.
Purchased for a Large Screen.
Highway not verified
I drove down the road at 60~70km and felt that the wind hitting my stomach was considerably reduced. I plan to test it by driving to see how effective it will be as it will get colder from now on.
Looks a lot different and satisfying.
View detail
Fits: KAWASAKI NINJA 1000 SX, KAWASAKI NINJA1000, KAWASAKI Z1000SX
Might be good.
I am 185 tall, so I felt a little small in the standard Screen.
Even at high speeds with temperatures of 13 degrees Celsius, it seemed to avoid the wind well and was easy to drive.
View detail
Installation could not be done
The two front holes were misaligned with the Bolt position on the Body side and could not be installed.
I asked Manufacturer to check and they said there was nothing wrong with the product itself.
I don't know why, but I decided to return it because I can't put it on.
Please be careful if you are buying the same type of car.
It is a shame because I liked both the transparency and the shape.
View detail
As Image
After installing Navigation and changing the position, a suitable Screen was found. View detail
Fits: BMW R1200GS, BMW R1200GS ADV, BMW R1200GS RAL, BMW R1200GS EXC, BMW R1250GS, BMW R1250GS ADV, BMW R1250GS HP
High wind resistance
The windproof effect is high, with a larger size than OEM.
The wood is thicker and more rigid than OEM, so the chattering noise that bothered me in OEM is gone.
The top edge is at eye level. [Color] Clear? [Color] Smoke colors provide good visibility, but be careful with dark colors.
View detail
Windproof effect is moderate
I used to wear Pooch's Long Screen, but the look didn't really stick and I had to remove it.
I still wanted a little wind protection, so I bought this Short Type.
The effect is certainly there, though not as much as Long.
There may be a difference in fatigue between the two.
And in terms of design, I think it is the best among the various external screens for Z1000, and I am glad I bought it.
Installation is easy, and the ScreenBody and Bracket are well made.
If there is anyone who is not sure about this product, I would like to recommend it to them.
View detail
◎
I bought it because I wanted to increase comfort on the highway. Personally, I don't like Black or rainbow colored Screen because it looks childish. [Color] It was nice to have Clear. The installation requires a slight opening of the screen, which is disappointing since the accuracy is not very good for such an expensive screen. I thought that changing the screen would make the parenthesis worse, but I am satisfied with the new screen because it is expensive and looks good and cool. The comfort on the highway has improved considerably. View detail
Large I'm satisfied.
[How is it used?
What I like very much is that I don't think about removing it.
Was the one you received as per Image?
It was much better looking than Image. That's what Pooch is all about.
Was the installation difficult?
It is not difficult to install, but the procedure must be followed.
Also, the more knowledgeable may have more trouble.
1. the product arrives securely packaged (by the Manufacturer) in the same condition as the Image of the product on the Web.
2. I thought it would be possible to install it as is, but it was impossible because I could not get the tool in.
3. Remove the four blind lids in the photo, remove the screws, and remove the bracket from the screen.
4.The R and L are pressed on the bracket, so there is no chance of making a mistake after removing the bracket.
5.Remove the OEMBolt from the car body and install the bracket. Normally, the bracket is temporarily fastened and tightened after checking the balance, but as described in 2. However, the accuracy of the holes is very good and there is no rattling, so the bracket is large and strong even when tightened.
6.Bolt was included for fixing, but I used OEM as is.
7.Attach the screen. Since the bracket is tightened before the screen, it requires a little bit of force, but the screen is attached without any problem since the hole accuracy is good.
8.Place the blind lid on the head of the Screw that holds the Screen in place. This is the end of the process.
After installation, I was impressed with the precision and the attention to detail that goes above and beyond the Gold price, which I thought was not expensive at all.
How was your experience with it?
I just installed it and haven't run it yet, so I will update this page after running it.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
So far, none at all. It's so good looking that you would think it was OEM.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB300R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
Looks great.
The first used CB125R I bought came with a crappy Chinese Meter visor.
I was looking for a CoolScreen and found Pooch's Screen, which was both windproof and looked terrible.
I was a little hesitant because of the price, but it was the right decision to buy Large.
The windproof effect is also reasonable, and the appearance is cool!
The Bracket and Screen are both solid!
Above all, Cool!
View detail