Reviews
![Screen [Double Bubble]](https://img.webike-cdn.net/catalogue/images/30991/474_zerogravity_TS.jpg)
Not bad, but ….
I want to change the shape of OEMScreen and [Color] I bought it for the Smoke color.
The quality is not extremely bad, but I was concerned about the White powder like Wax that seems to have been used for finish polishing left between the bumps of the Screen and the thickness is thinner than the OEMScreen.
As a USManufacturer, the roughness of the construction cannot be denied.
It's a drop in the bucket compared to Screen, a domestic manufacturer of Magical racingetc.
Shape and [Color] I am satisfied with the density of Smoke.
Windproofing is not nearly as good as OEMScreen, but I don't care.
Logo sticker was included as a Large and Small bonus.
View detail
Saiya Exclusive Screen for Cowl
[How is it used?
Used in YZF-R1 Race base car (2017).
Was the one you received as per Image?
It is exactly as shown in the Image. The manufacturer's thoughtfulness can be seen in the anti-scratch Film that was attached when the product arrived.
Was the installation difficult?
It is an Exclusive Screen for Cowl by the same Manufacturer, so it can only be attached as it is attached.
Rather than fastening the Bolt one by one, it is easier to install the Bolt by first temporarily fastening it sparsely and then tightening it at the end.
How was your experience with it?
The Screen position is higher than OEM, so it is easier to get down in a straight line and the visibility is much better. [Color] I was amazed at the Clear. No distortion at all.
[Included Parts:were they on?
ScreenBody and Screen bolt are included.
View detail
Dissatisfied with the way it was packaged
The product itself was fine, but Yamato Transport informed us that the corrugated cardboard had been torn during shipping due to the sharpness of its shape, and the contents had leaked out.
Since this is an expensive item, please respond with another One sizeLarge corrugated cardboard with cushioning material packed, etc.
View detail
Windproof effect is increased.
I installed ExplorerWindshield on my CL500 and love it.
Purchased LargeScreen for additional wind protection
70mm upward and 60mm larger in width.
The windproofing effect has been improved, so Standard Screen
It's good for people who are tall and concerned about Wind Cutting noise.
However, in my case (Height 171cm) The top edge of the Screen is exactly at eye level when you are sitting down.
It bothered me so much while driving that I went back to Standard Screen.
Just taller as above. (180 cm or more) Then I think the top edge will be slightly below eye level.
Combined with the windproof effect, I think it is satisfactory enough.
View detail
Fits: KTM 790 Adventure, KTM 790 Adventure R, KTM 390 ADVENTURE
Increased highway comfort
The size is Large, so I was worried about visibility at night. [Color] I bought Clear. But the look. [Color] Regretted that I should have made Smoke.
If the Handlebar is raised more than 3cm, the Knuckle guard will slightly hit the Screen with the Handlebar fully locked.
Windproofing has been increased and high speeds in winter have become more comfortable!
Another good thing about Screen is that it does not blur at high speeds.
View detail
The position is ….
It may be an individual difference, but when installing ( 9gt+) After alignment, the upper Screw position is set to "Quantity".:Pair (for Left and Right) I managed to get it on by bending the Screen. Also, it is unfortunate that it touches the Reserver tank of the Brake a little when it is fully locked at the bottom.
I think the installed Style is good, so 3 stars.
View detail
Don't expect too much.
The windproof rating of the Normal screen was quite high, and I installed it thinking that the High Screen would be perfect, but I was disappointed.
I was 175cm tall, and when I ran at high speeds with an off-helmet and held up my hand to check the wind flow, I found that it was indeed flowing in a way that slightly avoided my upper body. However, there was quite a bit of entraining wind, and when I raised the Helmet Shield, I could see the wind flowing in. If you also open the Intake on the chin, it becomes cool enough to feel the wind flowing in.
I gave it a low rating because it looks Wide&Long and I was expecting too much, but if you switch from a Motorcycle with no Screen or Short Screen and experience this High Screen, I think your rating will be the complete opposite.
Manufacturer claims "High Screen&Prime for superior wind protection;" however, we would expect a near windless protection effect. It would be better to add that it is designed to prevent unpleasant wind and receive moderate wind.
I would rather buy an OEMGuard and leave the Screen at NORMAL than go to the trouble of paying 30,000 yen for it. Or, you would be happier with an external High Screen.
View detail
Without Honda Front carrier...,
Cannot be installed without HondaFront carrier.
However, I think the Design is very good.
I don't feel the windproof effect is very effective, I think Windshield, another company, would be more effective.
View detail
This is the kind of Screen
I personally did not like the design of MT-07 after most of the screens were installed, probably due to the mounting position of the Light, but with NAKED, it is like a battle against wind speed at high speeds, so I had no choice.
Since we wanted to avoid a large, prominent Screen, we chose a Type with a transparent top.
Middle type in terms of size (Small Type?) Although it cannot be said to be strongly effective, it seems to have slightly reduced wind pressure hitting from the chest down at high speeds of 80 km or more, but a larger type would be better if the wind protection effect is to be enjoyed at the largest possible size.
As for the installation, I think it is easy and even girls who are not good with Machines can do it.
Since the meter is in the front of the car, there is space for a pair of shoes between the meter and the screen, which is convenient for placing gloves or other items.
You could say it's a waste of Space, but … sweat.
View detail
Wind pressure prevention, mounting △
as per Title
Nothing wrong with wind pressure protection.
However
Part of the Screen interferes with the Brake tank on STD Handlebar
Light interference when changing the angle of the Handlebar.
Therefore, I changed from STD Handlebar to one with an increased BEET aperture angle, but I could barely get it to a position where it did not hit the tank when the Handlebar was turned off.
Screen and Brake tanks with some Clearance.
In the end, the Handlebar will only feel pulled back, and there will be no height flexibility at all.
Are you sure it's for a specific car model?
The build quality was solid, but the finish around it looked a little crude.
View detail
![[Repair/Option Parts] Windshield RS Series Shield Single Item](https://img.webike-cdn.net/catalogue/images/78207/97519_TS.jpg)
Fits: HONDA CT125, HONDA GROM
I can't get into it without Spacer and Rubber's Cushion.
I bought it to replace SS to RS, but it is inconvenient without Screw set. Without it, I can't get into it after all. It is not so different from buying the whole set. View detail
For appearance and windproof effect.
I bought it for its look and for windproofing when driving at high speeds.
Installation requires no special tools, and anyone should be able to install it easily.
For something like RubberTube to put on the edge, you can put a marker in the middle and grind away at it to get Quantity.:Pair (for Left and Right) I was able to attach it symmetrically and cleanly.
I can't say how it looks because I think it depends on your taste.
As for the windproof effect, in my case, my neck and other parts of my body would get tired after driving long distances at 100km/h on the highway. It doesn't have that much of an effect." that was it
So I'll drive slower on the highway.
View detail
The effect is subtle
OEM replacement can be installed without any problem. The effect and appearance will not be noticeable. [Color] Smoke made it look a little tighter. View detail
poor in cost performance
The screen itself is cheap, thin and small compared to OEM products.
Also, like MRA, the Rubber stop that covers the Screen tip is not attached neatly because it is fastened with adhesive.
View detail
Effective
Effect Large
After putting it on, the Helmet's wind noise became the base.
I wonder if the wind that was hitting my body is now hitting Helmet.
View detail
Asahi Windshield Asahi Windshield af Short Visor
I am satisfied with it, not too high and not too low. Installation is easy. View detail
There is a discrepancy between the product image and the actual product.
I was not so surprised at the discrepancy between the product and the actual product because I was suspicious of the product image when the product Size label indicated a height of 54 cm, but it was a bit of a risky purchase. It is much bigger than the product image.
The replacement with this Screen has reduced the number of dead insects stuck to the Helmet's Shield by 90%, and the Helmet is hardly exposed to the wind except at the top.
As a demerit, I am concerned about the upper edge of the Screen coming to the center of my eye line, and I need to get used to the fact that the distorted field of view will occupy much of my field of vision (I got a little drunk the first time I rode after the exchange).
Design is good for me personally, although it is uncomfortably large.
View detail
X-ADV Puch Long ScreenDark smoke
[Color] Clear、 [Color] I didn't like the two-tone black and dark smoke color, which has the X-ADV logo in the middle, so I chose dark smoke. The windproof effect is excellent, but Dark smoke is so black that you can hardly see the front.
[Color] Smoke without two-tone color or the best is [Color] I wish there was a color in between Smoke and Dark smoke.
View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
See Up??
Type that is inserted into the gap between the Body and Lens of Headlight.
The Visor side has a turnover so that it will not rattle when firmly inserted, and the appearance has been dramatically enhanced.
HeadlightQuantity:Pair (for Left and Right) If you remove the screw from the first screw, you also need to loose the next removed Lens, but a Phillips screwdriver is all you need.
When removing and attaching the Bracket that holds the Lens Cover
It was easy to install, although a little hang is required.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE+(ZX1002DKF), KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE
OEMOption Screen
[Color] I wanted Smoke or there was no Design that I liked at the time of purchase, so I chose OEMOption.
Wind protection clearly has a Minus effect.
The screen was lowered, so at high speeds, the wind was strong from the shoulders up, which was Large.
I plan to replace it when I find a design I like.
View detail