Reviews
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
Windproof effect.
There are many videos on youtube etc. for installation, so you can install it while referring to them. As for the windproof effect, it has a windproof effect from half of my face to my chest area. The Demerit has a screen that creates turbulence, which causes the head to shake when the wind blows against the helmet. The height and angle of the screen must be adjusted as often as possible to avoid turbulence. It is not enough to just raise the screen, but it is better to adjust the image so that the turbulence hits the entire helmet and the wind pressure is dispersed throughout the helmet. It is not easy to adjust the helmet, but I like it because it reduces fatigue during long tours, and it also makes the helmet look more like a travel helmet. View detail
Easy to install
The Instruction Manual is easy to understand and I was able to install it easily even though I am not familiar with it. It also looks good. View detail
Fits: HUSQVARNA 701ENDURO LR, HUSQVARNA 701ENDURO, HUSQVARNA 701SUPERMOTO
PetitAdventure
I installed it on a 2023 701 Enduro.
In this year, the BlinkerIndicator will be hidden in the shadow of the Bracket, so it will be harder to notice if the Blinker is forgotten to be turned off.
The rest of the hose is a little tight against the clutch hose, so we added a wire cover to the part where the hose hits the clutch hose.
Installation itself is easy.
It is also useful when installing Navigation, Smartphone, and Camera for Dora Recorder.
I prefer to install the RALLY50Tower, but this is easy to install and has a good windproof effect, so even if you are not ready to install the RALLY50Tower, you can easily install the PetitAdventure. (or Tourer) You can feel the mood.
View detail
ZETA AdventureWindshield、LargeScreen
The Universal Screen I used before was a type that was attached to the Handlebar, which inevitably made the Handlebar operation heavier, but this type is attached to the Handlebar Clamp, so I think the Handlebar operation has become lighter.
In the case of my car, it was a little difficult to install because I have a Handlebar Up Spacer installed, but I think it can be done without much difficulty in the case of a normal car.
If I had to say something more about the actual use, I would say that if the straight portion of the mount bar were wider, it would be possible to mount a variety of objects.
Overall, I am satisfied with Large.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 11mm diameter Brace
I wish it were a little longer in the vertical direction.
[How is it used?
For Commuting and Touring
Was the one you received as per Image?
I wish it was a little longer in the azimuth direction.
Was the installation difficult?
No problem
How was your experience with it?
Either the rectification effect is not as effective as expected or the angle of installation is bad, or the wind tends to roll in on the body.
[Included Parts:were they on?
Mounting parts are fine.
[Was there anything that disappointed you?
Rough&Road's Screen has a better rectification effect on the body
Other items that would be helpful
Points and hangs for installation/The screw part is shallow with sandblast and there are places where it is caught, so it is better to temporarily assemble the screw after spraying lubricant/Points to note/If there is a machining part of the female screw part, it may be smoother to tap the part before installation. Opinions and requests to the manufacturer/It would be better if the screen was a little longer in the vertical direction, a little more. [Color] I want a Screen with darker Smoke, Screen chattering on bad roads.
View detail
Sounds good
I installed it on my CT125 JA65 and I am satisfied with the Large type because I can feel the wind protection effect while driving. I also appreciate the bracket that can be used as a cell phone mount. I am glad I purchased this product. View detail
Well feeling is there.
It is for KLX250, but I installed it on SUPER SHERPA.
From the beginning, Screen's mounting parts are scratched and the dimensions of the bar are different, but it is functional.
The screen does not shake or deflect when running.
I thought it would be easier to adjust the height of the bar or Screen if the direction of insertion of the Bolt in the Clamp section where the bar is attached was reversed.
View detail
Can be installed tightly
In my previous car, I used a mirror mount windscreen, but I feel that this product, which uses a handlebar clamp, is more firmly attached. If you do not follow the instructions properly, you will have to redo the cable routing, so please read the Instruction Manual carefully. The Smartphone Holder on the Mount Bar allows me to check the Navigation screen without moving my eyes too much, which is a big plus. The CT125 has a meter panel at the bottom, so I felt a little lonely in front of it, but now it's nice and lively. View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Just the right wind protection, easy Rally-ization Custom
Purchased as a countermeasure against direct wind in winter. installed on CRF250L MD47.
Installation is easy as it is just a matter of replacing the upper stay on the handlebar.
If there is interference, the angle of the Brake lever must be adjusted.
The windproof effect is quite good, even at 60 km/h the wind blowing against my body is reduced to the point of my nose on the Helmet.
At high speeds, it becomes a bit of a Drag, so it may not be suitable for those who fly.
Up to 100 km, no problem.
I will probably take it off when the weather gets warmer, but it's not hard to take on and off, so I'm sure I'll be using it every Winter Season.
View detail
Thanks for the Mount bar Large change!
Although it is a LargeScreen, the wind protection effect is not as large as I expected. However, the mount bar is convenient for the LargeScreen, and a drink holder can be attached for now. View detail
Windshield
We were not sure about the DAYTONA bracket, but decided to go with the DAYTONA one because we did not like the fact that the DAYTONA bracket was made of a steel press plate.
The bracket is Exclusive Design for easy installation and the pipe is thicker for an adventurous look.
Shield would be better if it was a little more Large.
I would like Repair Parts to sell the Large size.
View detail
Not too Large and well built.
I installed it on my CROSSCUB110 (JA45). The construction is solid, and the screen is not too large, but just the right size. If it is too large, it would be dangerous on a windy day. View detail
Style is good, windproof effect is Small
Was the installation difficult?
Chain tension can be adjusted at the SkillLevel, and tools (Hexagonal Wrench、Glasses Wrenchetc.) would be able to do this without any problems.
An easy-to-understand Instruction Manual is also included.
The height and tilt angle of the screen can be easily adjusted on the go with the Hexagonal Wrench1 PC.
How was your experience with it?
The small size of the screen makes it look stylish, but the windproof effect is the smallest, so it may not be suitable for long tours to reduce fatigue and protect against the cold.
I think the accuracy and texture of the Bracket and Screen are good. It has a slightly luxurious feel.
View detail
Better than it looks.
I think the wind protection is more effective than it looks.
It is made of polycarbonate, so it seems to be resistant to Wound and has good visibility, but the Balance of Handlebar collapses, so it may be necessary to adjust it with Bar Endetc.
I feel that handling is heavy at very low speed than NORMAL, probably because I am using it with Zita Armor Handguard.
View detail
better than nothing
The Shield itself is a little small, so you can't expect it to be completely windproof, but it blocks the wind from the front, so it will probably alleviate your body cold.
Personally, I like it because it keeps me out of sight when I look up a little.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
High Quality
This was mounted on a 300L. Nice quality, fits well. Lots of turbulence for me at my height at 71". Mounted right side up was worse. When mounted upside down it lowers the turbulence to around my neck and chin. Tilting of the shield made no difference for me. Lowering adjustment is limited because the right bar of the frame hits your brake cable. View detail
The construction is good.
It's well-made and highly accurate. The windproof effect is also good. If it were a little cheaper, I would have no complaints. View detail
Little wind protection but high quality around Handlebar
Changed the Spec. from Screen for Grom of DAYTONA.
Although the Screen is a little small, there is also some windproof effect, and above all, the stiffness and the texture of Bracket are high and the satisfaction is high.
DAYTONA's paint is not so good and it will come off when it rusts.
In that respect, ZETA seems to have no such worries.
View detail
Good quality.
The quality is very good. The price is high but Recommendation. View detail