Reviews
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
The thick Frame is useful!
Since it is a Small Shield, I wonder how effective the windshield is. However, in my opinion, the Level is better than no Level.
The advantage of the Large is that a Smartphone Holder, DriveRecorder, and Drink Holder can be attached to the thick and sturdy frame, making it possible to configure a cockpit on a motorcycle. Even with all of these things attached, there is no shaking at all.
It's really useful. 。 I'm glad I bought it 。 My Kok Pit is now complete.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
Windproof effect.
There are many videos on youtube etc. for installation, so you can install it while referring to them. As for the windproof effect, it has a windproof effect from half of my face to my chest area. The Demerit has a screen that creates turbulence, which causes the head to shake when the wind blows against the helmet. The height and angle of the screen must be adjusted as often as possible to avoid turbulence. It is not enough to just raise the screen, but it is better to adjust the image so that the turbulence hits the entire helmet and the wind pressure is dispersed throughout the helmet. It is not easy to adjust the helmet, but I like it because it reduces fatigue during long tours, and it also makes the helmet look more like a travel helmet. View detail
Windproof effect is increased.
I installed ExplorerWindshield on my CL500 and love it.
Purchased LargeScreen for additional wind protection
70mm upward and 60mm larger in width.
The windproofing effect has been improved, so Standard Screen
It's good for people who are tall and concerned about Wind Cutting noise.
However, in my case (Height 171cm) The top edge of the Screen is exactly at eye level when you are sitting down.
It bothered me so much while driving that I went back to Standard Screen.
Just taller as above. (180 cm or more) Then I think the top edge will be slightly below eye level.
Combined with the windproof effect, I think it is satisfactory enough.
View detail
Fits: KAWASAKI D-TRACKER X, KAWASAKI KLX250
Diversion to SUPER SHERPA Protection effect realized
Installed on SUPER SHERPA.
It is for KLX250 but just fits to the handlebar clamp width of KL250 Sherpa.
However, the mount bar is covered over the Choke Lever in the OEM position, so the Choke Lever cannot be pulled out.
The installation of the bar rise kit has also eliminated any problems with hose and cable routing.
I am satisfied with the Wind protection effect on highway driving.
View detail
Fits: Others For handlebar without brace Handlebar diameter 22.2mm
Sufficient wind protection and good Design
[How is it used?
The purpose is to protect against cold during winter touring and to reduce fatigue when using high speeds.
Was the one you received as per Image?
When I put it on, it is not as large as it looks in the picture, but it is reflecting.
Was the installation difficult?
It can be installed with a single 4mm Hexagonal Wrench, and even beginners should have no problem if they assemble it in order.
How was your experience with it?
It is windproof enough to keep the body cool in winter, and high speed is easy!
The design is good, and the windshield tends to be tacky when it comes to windshields.
This product is Refreshing and looks great!
[Included Parts:were they on?
Quantity of RepeatThailand for fixing Cable when mounting electrical components on the Mount bar and a set of components required for installation.:2pcs included
[Was there anything that disappointed you?
Nothing special, just what I expected.
Large type is also available as an option, which is larger than the attached Shield.
I plan to replace it with a Short Type Shield in the summer because it is too much trouble to remove the bar!
I would like to request to Manufacturer that the Standard&Large type be made a little more downwards in the Large size. (50mm) I'd like to have something extended as much as possible.
Because the wind is coming from a slightly lower direction, the wind is coming from a slightly lower direction.
I look forward to your consideration.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 11mm diameter Brace
A tremendous degree of freedom of adjustment.
Bar handle on CUB + use here.
I was thinking a lot about making it look like RALLY50, and I realized that buying this would be the solution.
The simplicity of the structure allows for a high degree of freedom of adjustment, so it can be used universally for various types of vehicles.
However, in terms of size, I felt that the Large type Screen was better in both windproofing and appearance with a fancy look.
View detail
Easy to install
The Instruction Manual is easy to understand and I was able to install it easily even though I am not familiar with it. It also looks good. View detail
ct125 hunter cub wind screen
very good!About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HUSQVARNA 701ENDURO LR, HUSQVARNA 701ENDURO, HUSQVARNA 701SUPERMOTO
PetitAdventure
I installed it on a 2023 701 Enduro.
In this year, the BlinkerIndicator will be hidden in the shadow of the Bracket, so it will be harder to notice if the Blinker is forgotten to be turned off.
The rest of the hose is a little tight against the clutch hose, so we added a wire cover to the part where the hose hits the clutch hose.
Installation itself is easy.
It is also useful when installing Navigation, Smartphone, and Camera for Dora Recorder.
I prefer to install the RALLY50Tower, but this is easy to install and has a good windproof effect, so even if you are not ready to install the RALLY50Tower, you can easily install the PetitAdventure. (or Tourer) You can feel the mood.
View detail
Just right for CROSS CUB
It is small as a screen, but is just the right size for a CUB.
I love it
View detail
ExplorerWindshield
It works well for long-distance touring.
The appearance is controversial, but I think it looks cool in an Adventure style.
The Smartphone Holder can also be mounted, reducing eye movement when driving.
The installation was a bit odd in terms of positioning Large because the individual parts are separated, but I don't think it is a particularly difficult task.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 11mm diameter Brace
Lighting speed shipping to Oregon USA
The part arrived in 3 days after shipped total time from order 5 days-Delivered !!!. Highly recommend Webike for all your after market MC parts, way better than Ebay or Amazon. I will defenetly be back. View detail
ZETA AdventureWindshield、LargeScreen
The Universal Screen I used before was a type that was attached to the Handlebar, which inevitably made the Handlebar operation heavier, but this type is attached to the Handlebar Clamp, so I think the Handlebar operation has become lighter.
In the case of my car, it was a little difficult to install because I have a Handlebar Up Spacer installed, but I think it can be done without much difficulty in the case of a normal car.
If I had to say something more about the actual use, I would say that if the straight portion of the mount bar were wider, it would be possible to mount a variety of objects.
Overall, I am satisfied with Large.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Highly windproof.
The advantage is that the Screen can be angled freely. Easy to install and solid. View detail
A more comfortable ride
This is a perfect fit for my 2023 CT125, and I couldn't believe how fast it shipped from Japan to the U.S. The wind still hits my face a bit, but overall the bike is way more comfortable now in the 45–55mph range. The windscreen pretty much blocks the wind from hitting my torso, so it no longer feels like it's trying to blow me off the bike. Very happy with it. View detail
Zeta Adventure Screen
Easy installation, everything was straightforward and intuitive. Screen is a usual size and the frame is suited to phone mounts, USB and the like. I liked it so much I'm just buying another for my DAX which is the same fitment View detail
Excellent windshield, quality solid hardware
I am very happy with this product. It was not easy to mount in my bike because it was difficult to set a crossbar in the right spot. It was not possible to mount it using the included adaptor. It looks good and works good. Good quality and very resistant hardware. Very well built. It is well worth the money. View detail
klx230 cm
It's amazing that something like this can keep the wind down enough. View detail
Arrived in 5 days.
Delivery was just perfect. It was well packaged and sent in a box. It's pretty when installed. It was a bit inconvenient when installing the mount bar. When the steering wheel is adjusted to fit the body, there is interference with the brake hose.
I'll have to look at my hands separately. It's nice to have a phone holder attached to the mount bar. -------------------------------------------------- -------- Delivery was perfect. I also sent it in the box. It's pretty. It was a bit uncomfortable when mounting the mount bar. Adjusting the handle to the body makes it interfere with the brake hose. I have to look separately. It's good to have a cell phone cradle on the mount bar. Powered by Google Translator
View detail