Reviews
Outclassing accuracy only for OEM Product
I had installed a Puch MeterBackShell, but the handlebar change made it impossible to install the AXIS monkey wire.
I bought it with the intention of hiding the Meter back.
I don't expect any windproof effect.
I like Silhouette in Normal mode, so I searched for the smallest screen possible and ended up with this one.
This would be a good idea to relocate MeterBody closer to Center.
View detail
There were only 3 screws (4 rubbers) in the screen receiver.
I'd like it to be clear where to put the objection. View detail
OEMs are still the best.
It was on the other one, which I owned two of.
Compared to the Rizoma Short Screen, the Fly Screen here has a rougher design and a better rectification effect.
Rizoma's Screen is a nice European MOTARDDesign, but it has a rectifying effect even if it is about 60?s here, so it is suitable for the traffic situation in Japan.
The price is reasonable and I liked this one too.
View detail
Among the many MT-09 screens, the sense of unity with the car body is Number one
Until now I have been using the outside screen of overseas Manufacturer, but when I review it again at some time Screen seems to be overly head to head, looking for a thing with a sense of unity with the car body I found this product and bought it.
【What made you decide the purchase?】
Although I knew this Screen itself from before buying a car body, I thought that it was not particularly cool either at first but thought that it was an ornament with no wind protection effect.
However, when I review it again at a certain time, it will be a compact impression with Sharp by wearing it, I thought that the feeling of unity between the car body and Screen will increase and it will be more comfortable to purchase.
【How was it actually used?】
I think that the sense of unity with the car body increased and the atmosphere became more Sharp.
But it is natural but there is no windbreak effect. It would be better to think that it is about the blindfold Cover behind Meter.
Rather my purpose was to cover the gap between Meter and Headlight and to hide the Wiring classes behind the Meter so we needed it enough quality.
【Mounting was difficult?】
If you have Hexagonal Wrench and Phillips Screwdriver you can exchange very easily.
Quantity : Pair (for Left and Right) Let's carefully read the Instruction Manual and exchange it so as not to mistake the Bracket of.
【Please tell me the installation point and hang】
Screw fixing Screen and Bracket is Material : Let's be careful not to tamper as it is Plastic.
Since I may frequently detach from Custom, I exchanged Screw for Stainless Steel 's thing.
[Is there anything I was disappointed about?]
There is no windbreak effect, but I do not think that it was disappointing because I did not purchase this screen for that purpose.
Screw to fix Screen and Bracket for a moment is Screw Material : Because it is Plastic, I think it was Standard and BoltorScrew which is cool-made from Gold Genius.
【Hope for Manufacturer - Please let me know if you have any improvement points]
this [Contents] In 1. I thought that 50,000 is too high to be honest.
I think that it is still convincing price if it is about 10,000 yen JUST ....
【Have you compared items?】
None.
F. It is transfer from FABBRI's Sports Screen.
Screen was pretty good and I liked it in Extreme atmosphere, but since Screen is on the standing side, if it is combined with the thin MT - 09 of the buttocks it becomes a bizarre appearance and it will be replaced with the product of Y's Gear I made it..
[Others]
Material : I think that it is roughly good product except for PlasticScrew.
If you want to emphasize the Compact and Sharp of the car body by dividing the windproof effect, I think this Screen is an iron plate.
View detail
Measures against insects
MT-07 is the coolest without Screen, but if you do not install Screen, Meter will be outrageous ahead.
Yes, it is an assault charge.
If you do not install it you will have severe eyes.
Large off by the ratio of insect control 4 and wind protection effect 6.
And the windproof effect is so fair. Wind does not hit the torso from the neck down.
Well, I'd like to say that I'm going to close Bench first when Helmet's Ventilation full throttle is about to break my neck.
If it is 120 kilometers to 130 kilometers, this screen will be Large. There is no problem..
I chose Clear.
Again MT-07 is not cool without Screen. So, it's a bad challenge to Clear.
View detail
More than wind avoidance ...
The wind avoidance effect felt within the speed limit.
However, compared with the full cowl Motorcycle, the windshield effect is minimal.
However, it is quite effective as a countermeasure against insects when running at nighttime than windshield effect. Around mentor etc etc. I'm pretty clichy, so when I got insects in such places ... I think cleaning is Large strange. If Screen has arrived, insects hit Screen and insects do not stick around Meter, so if you consider cleaning, I think that it is better to wear it.
View detail
There's only Y's Gear
Tentatively I wanted Screen so I bought it.
It looks exactly, and the figure with Screen is like an OEM.
As a windshield I feel almost unusual, but I am satisfied with the appearance.
View detail
Purchase with Option
With vehicle purchase option
It is installation to hide ETC's Wiring
Although appearance should not break the design of the car body,
It is too small as Screen to function
Other company products may be better if retrofitting - - -.
View detail
Reliable OEM Parts Number
I installed it when purchasing the body.
I think that there is Screen is cool.
The windbreak effect is almost none on the general road, and on the expressway, the stomach area is protected. It will be appropriate if you lie down..
View detail
The effect is
This Screen has some windproof effect. I frequently use high speed, continuous high speed driving is 120 kilometers or more, at the speed more than it will be stronger. I hope to have a Length a bit more upward. Also, please note Screw quadrilateral fixed Screw if you install by yourself.
It is probably Nylon. Because it is unusually lightly Nylon, it is easy to lose the threads, let's carefully tighten not to overtighten. Even if you lick it you can purchase separately as a part.
View detail
I can not Recommendation except Style-focused
I got installed at ysp when purchasing a vehicle. Design thinks that it fits MT - 09, but there is no windshield at all. It was completely decorative, and it was not useful at all when driving at high speed. I changed to MRARACING now. View detail
MRA Racing Screen was back ordered so I canceled it and got this one instead. Well, I was looking at this first. It's a bit smaller (shorter) than I thought but it seems to do its job. I wanted something that could help eliminating some wind drag on h
MRA Racing Screen was back ordered so I canceled it and got this one instead. Well, I was looking at this first. It's a bit smaller (shorter) than I thought but it seems to do its job. I wanted something that could help eliminating some wind drag on highway. They do look good as well. It does not look bulky and seems to harmonize with the front contour. View detail
EDesignBecause of OEM product, it matches with the body comfortably. Compared to the aftermarket product which emphasizes design, it is suitable for practical use because of covering the base of a mirror, etc. widely.EWearabilityCompared
EDesign
Because of OEM product, it matches with the body comfortably. Compared to the aftermarket product which emphasizes design, it is suitable for practical use because of covering the base of a mirror, etc. widely.
EWearability
Compared to the riding the motorcycle without the windshield on the highways like the metropolitan expressway, I could feel the effectiveness sufficiently. For long-distance touring or touring for several days, it will be effective steadily. It looks big at first sight but it will suit you if you used to ride the motorcycle equipped with a cowl. (As well as me.) The position of the key is unique, but there is no problem for the locking and unlocking even if it has been attached.
ECaution
The mounting way is not difficult. As for the one side of the bracket of the body mounted parts, the fixing bolt which stops the fork bracket is used. Because it is a part which influences the operativeness, I recommend to ask a pro shop to install it if you don't have a torque wrench.
View detail