Reviews
[Color] Smoke Screen
Installation was easy, even for an amateur. With a good density, (in Tokyo) I could see in front of me even at night, the Large size was just right, and the wind hit me not hard at all at 100km/highway cruising. View detail
Asahi windshield windproof under repair crow model
"If you are a sports fan, you can enter your favorite sports name in the comments section below. If you are a sports fan, you can enter your favorite product name in the comments section below. It's hard..
This screen is unique and has a good appearance. Also, the picture of a small monkey on the transparent glass is very impressive. It seems to be a very good product as it has the advantage of being equipped with or without a windbreak cover.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
The thick Frame is useful!
Since it is a Small Shield, I wonder how effective the windshield is. However, in my opinion, the Level is better than no Level.
The advantage of the Large is that a Smartphone Holder, DriveRecorder, and Drink Holder can be attached to the thick and sturdy frame, making it possible to configure a cockpit on a motorcycle. Even with all of these things attached, there is no shaking at all.
It's really useful. 。 I'm glad I bought it 。 My Kok Pit is now complete.
View detail
Cool!
I think it is the coolest of all Screen's products.
Easy to install.
Since the Cover area would be left open, I plugged it with thin plastic sheeting from Black.
The windproof effect is about as good as the bottom of the Helmet, so high speeds are now easier.
View detail
UrbanGSParis-Dakarization
It's a standard Custom, Parenthesis is good. I don't know the effect of wind protection yet, but I think there is some because NORMAL is not there. The main thing is the appearance design. View detail
Added photo of the bracket portion of the installation.
I didn't have a picture of the Bracket part of the installation when I posted last time, so I added a picture anyway. Just for reference. View detail
Fits: DUCATI PANIGALE 899, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199
Standard Custom
About 5 cm higher than OEMScreen? It's about 5 cm taller than the OEMScreen, so it's more effective Large on the highway and looks better. I'm not a CircuitUser, but I'm satisfied with Large. View detail
I devised a way to install it.
First, I had installed Endurance's LongShield, but due to my high seat height (176 cm tall, 80 kg), even on ordinary roads, I was exposed to wind on my face and had to drive with my head low and back rounded on the highway in winter.
I saw the feedback from people who have installed it so far on U-Tube and other places, and they had a lot of trouble with it.
So I attached UpperPlate and UnderPlate to the reverse side of the BodyBodyAdjuster with double-sided tape before attaching the ScreenBody, and when I attached the ScreenBody, it took less than 30 minutes. It took me less than 30 minutes to install the ScreenBody.
Even on the highway, the wind does not hit my face at all, and I regret that I should have chosen this Long Screen with Asahi Windshield from the beginning, but I think I will replace it with Endurance in the summer and enjoy it.
View detail
I put it on to keep the bugs away.
With OEMScreen, the insects hit my neck, so I wanted a slightly largerScreen and chose VS-14.
The objective was successfully achieved and the insects no longer collided with the neck.
It came with a warning to do the Cover when parking in direct sunlight, but honestly, it's a hassle and I'm going to try using it without it until I have a problem.
Is there a real problem or not...?
View detail
Windproofing effect Extremely Large
Even OEMScreen's windproofing was generally satisfactory.
However, he purchased this product for further wind protection.
The installation was very easy. 30cm of distortion during molding was found in the vertical direction as a minus point.
The key windproofing effect is immensely Large. At high speeds it becomes (almost) windless. It may be hot in summer.
Also, the material seems to be acrylic, so I am concerned about deterioration over time.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
Virago
Nice windshield! It was hard to find it but webike had) Fine quality, installation took some time and efforts... used a hole pincher to make holes in apron. View detail
As expected of MRA.
As expected from MRA, which is also used in MotoGP, the precision is perfect. It took a little bit of effort to re-fit the rubber, but even a beginner should have no problem installing it. View detail
Windproof effect.
There are many videos on youtube etc. for installation, so you can install it while referring to them. As for the windproof effect, it has a windproof effect from half of my face to my chest area. The Demerit has a screen that creates turbulence, which causes the head to shake when the wind blows against the helmet. The height and angle of the screen must be adjusted as often as possible to avoid turbulence. It is not enough to just raise the screen, but it is better to adjust the image so that the turbulence hits the entire helmet and the wind pressure is dispersed throughout the helmet. It is not easy to adjust the helmet, but I like it because it reduces fatigue during long tours, and it also makes the helmet look more like a travel helmet. View detail
Easy to use as OEM compatible without distortion
Used on ZZr1100 (C1).
The OEM screen was damaged from the attachment point due to age-related deterioration, so MRA's screen was introduced this time for the purpose of repairing it. [Color] Clear? [Color] I was wondering if it was Smoke or not, but this time I decided to use it as a makeover. [Color] Smoke.
The OEMScreen is slightly thinner than the OEMScreen, but has less distortion than the OEMScreen, and has good visibility even when it is tucked into the cowl.
However, Smoke Screen is darker in color than I had imagined, and I think it would be tough to run face down with Smoke Shield's Helmet late at night.
A Screen RimRubber was also included and its length was appropriate and favorable.
I am glad to see that they are making parts that fit older motorcycles as well, as screens wear out due to scratches from flying rocks and need to be replaced periodically. Next time I will try Clear Screen.
View detail
I think this is the only choice at the moment.
I was considering installing a screen and saw that MRA and ODAX had screens for sale. (Since it is stated in the product description that it cannot be used in combination with the genuine USB socket.) However, the installation stay was different from the picture of the person who installed it, and the USB socket could only be installed with the cover of the rubber cover of the USB socket open. I was using it as it was for a while, but I was wondering whether I should remove it or not because I thought the terminal would eventually be damaged if the cover was left open, when Yoshimura released Wind Armor. I saw the product image and the mounting stay, and it did not seem to interfere with the genuine USB socket, so I bought it and installed it. Now I can safely close the cover lid of the USB socket and use the socket. The screen design also matches the distinctive front mask of the 8S, so I would recommend it to anyone who uses the stock USB socket and wants a screen as well. View detail
TSRSports Clean
cbr600rr (2bl-pc40) Used for
Every time I change Motorcycle, I change Screen, but usually it is a certain foreign product. [Color] I used to use Smoke, but this time I decided to go with TSR on the recommendation of a friend! Moreover... [Color] Clear! At first I was only worried, but when I put it on and looked through the Screen, it was amazing! [Color] It's great to see it in Clear!
Also, parts to attach to Screen (Guard?) I was happy and impressed that WW is just the right length to use without having to cut the
I think the Body is well made!
View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Super easy and cool. (*´>ω<`*)
Super easy to remove and install d ('∀'*)
What if I fail or hurt you?
View detail
Focus on Design
I bought this product for the design, to make me feel better about my JOG125, because the Meter area looks poor. I don't expect it to be windproof because it is not high enough. The product itself has a good texture and fulfilled the purpose of purchase. View detail
Essentials for commuting to work and school
We installed this Screen (RS) on an ADDRESSV125S.
I found that the wind does not blow directly against my body during winter driving, which reduces the coldness I experience.
Also, when driving in the rain, the logic is the same and comfort is improved.
View detail