Reviews
Care must be taken when assembling.
It seems to be incompatible with the Inner panel during installation.
I would like to process and correct.
It's cheap, so I guess it can't be helped.
View detail
OEMCowl not available
Can't use it in the last semester tep, maybe I can use racing cowl... View detail
Installation could not be done
The two front holes were misaligned with the Bolt position on the Body side and could not be installed.
I asked Manufacturer to check and they said there was nothing wrong with the product itself.
I don't know why, but I decided to return it because I can't put it on.
Please be careful if you are buying the same type of car.
It is a shame because I liked both the transparency and the shape.
View detail
Quantity for Side Mirror Base:Pair (for Left and Right) The installation was tilted because of the different height of the
The Back Mirror is to be removed and this product is to be installed, but the Quantity of the Side Mirror Base:Pair (for Left and Right) The left side is about 1cm higher than the right side. I would like to find a shorter bolt and cut the Pipe to adjust it.
Also, I don't feel any wind from the front, but the wind (air) that comes around blows from my back, so my back is cold. I think I should have chosen something a little smaller. Well, it's a good thing that I don't get wet on rainy days.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Resonates badly above 150kmh
Wanted it for a bit of trackday work. Makes the bike unrideable. Resonates left an right. The faster you go the more movement you get. If you like your screen moving an inch left to right in increasing frequency, which causes your helmet to do the same thing than this screen is for you. 2mm is to thin. Ok below 100kmh. View detail
honestly speaking, I'm not happy.
There was no other design that I liked, so I purchased it by process of elimination, but it was difficult to install.
I went to the trouble of translating the instruction manual (there was a supplement in the instruction manual that asked for input here, but I couldn't install it in any way, so I installed it in a different way.
I am disappointed that they are selling at this price point with the quality of the processing premise.
I do not recommend purchasing this product if you are looking for easy installation.
The holes in the bracket were too small to begin with, and the rubber was so tight that it was deformed when the well nut was passed through. I decided that it would be impossible, so I installed it without putting the Screen through.
Rubber is quite crushed, so it seems to deteriorate quickly ^^.
View detail
disappointing
Wind protection effect is almost the same as NORMAL 。 It is 5 cm shorter than the external one we have been using and the cost effectiveness is Zero. View detail
Anxious to install Sukima Large
The gap at the front most part of the body is much larger than NORMAL, and I felt uncomfortable when I looked at it from the side. The gap is roughly 3 fingers wide.
Also, the installation itself is still NORMAL and only 4 well nuts are used to support the screen, so there is a concern that the screen may fall off. Even if the gap is removed, I would like to see a product with clip nuts and rubber washers for installation.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, TRIUMPH BONNEVILLE SE, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE, SUZUKI GSX250FX, SUZUKI GSX1400, SUZUKI GSF750, KAWASAKI W650, KAWASAKI W400, KAWASAKI ZEPHYR KAI, KAWASAKI ESTRELLA Custom, KAWASAKI ESTRELLA RS, KAWASAKI ZRX1100II, HONDA X4LD, HONDA X4, HONDA CB400Four, SUZUKI GOOSE350, HONDA CB400SF, HONDA CB400SF Ver S
It is well made
I put it on for now for touring, which is mainly high speed.
The work itself is easy, but it is better to prepare protection film separately to prevent scratches on the light bracket on the Motorcycle side. (Black color may show scratches).
As for the effect, we just put it on and did not actually run it.
I bought a Blast Barrier more than 10 years ago, and when I tried it on, it stuck perfectly.
I will try to change it sometimes with Ime Chain, but I would like to eventually add Cowl.
View detail
Although it does not interfere with the Screen of the Rising Windshield
I bought it because it does not interfere with the Asahi Windshield Screen,
Windproof area is small. I think it's not good for cosmetics.
View detail
Depending on the speed range, the rating...
The OEM Meter visor was somewhat more effective than it looked, but this product is very windproof and can increase cruising speed by +20 kmh, which is excellent.
But there is a problem. That is the interference and deformation of Screen's Meter due to wind pressure.
The stopping point of the Bracket isQuantity:Pair (for Left and Right) 1 item each (Co-tightened with Headlight's Stopper Bolt) The bracket is low relative to the screen, so the wind pressure will completely hit the Meter depending on the speed of the wind. Since the supplied rubber is not enough, we attached a 2mm rubber plate. Then, we can see that the Right Side, which does not have the Meter, is deformed by the wind pressure while driving.
I feel that the upper part of the screen needs to be reinforced with a universal bracket or something, but the screen width is narrow, so I would like to carefully determine if a universal bracket can be used.
View detail
It is less durable.
However, after less than a year of use, the upper and lower portions of the left side of the screw penetrating section, which holds the screen in place at four points, began to crack. I went touring on a windy day and it seems that it could not withstand the wind pressure. It is unfortunate. View detail
I feel like it's not rigid enough…
I took it off because I was worried that it was shaking plumbly to the extent that I was driving on the highway, it looks good but ….
Compared to other companies' 3mm thick products, it is lightweight, so it is good for driving down the road.
View detail
It's subtle.
Water and dust inside due to removal and installation of Meter visor.
Two types of hexagonal head are required for installation (not often seen in Size
There was one part of the installation that I didn't understand.
To align the screw holes, it is necessary to apply force to the Shield to push it apart.
I bought this one with a high Net rating because it is an unpopular car and there are only a few parts available.
Universal Product may be worse, but at least this one is not worth paying 30,000 for.
It is good for about $15,000. I would not buy it if I could start over.
View detail
Not good
It would be good if you are using a full face Helmet.
The gathered wind is all over my face and it's just painful.
I definitely wouldn't recommend this to anyone with a Half helmet!
It's a Level that should not be installed!
View detail
In exchange for normal, hole locations are completely problem nothing and good. There is also no distortion of a screen (I chose smoke), and a field of view is also good. It has been improved, so that it did not become as compared with normal, alt
In exchange for normal, hole locations are completely problem nothing and good.
There is also no distortion of a screen (I chose smoke), and a field of view is also good.
It has been improved, so that it did not become as compared with normal, although it was the protection in the important high speed area.
Merely.
.
.
the hole currently opened from the beginning to the screen -- since this hole comes to the back side where this is treacherous and which is a meter exactly, at the time of a /rainy weather run, water invades at the time of a car wash.
Since a parenthesis was not so very well, either, I buried by the mesh seat.
View detail
Anyway, it's huge.
I bought it for its windproof performance, but it was too large and didn't fit my GSX1300R HAYABUSA well enough to not detract from its design.
Motorcycle that is more like a tourer would have been more suitable.
I feel like I'm looking forward through the Screen, though the area of wind on the highway has been reduced.
If you are not sure about the Screen of Sports touring, I recommend Short Type.
View detail
The shape is fine.
I had been interested in this product for a long time, but had long put it off because I came across a great deal on a MRA Screen spoiler about three years ago and bought that one. However, I had been putting it off for a long time because I came across a great deal on a MRA screen spoiler about 3 years ago and bought that one.
I liked the Screen spoiler, but I was thinking it was time for an Ime Chain, so maybe it was a good Timing.
As for the PRO Screen, there are almost no reviews, and the only images I could find were of it installed on a DAEG, so when I installed it on a zrx1100 What if it's not the Image?" I had some misgivings, but in terms of design, it was exactly as I had Image and very much to my liking.
The screen spoiler could be installed without any stress by simply placing it on the cowl and fastening with screws, just like the OEM screen spoiler, but with the PRO Screen, the front ends lifted up when aligned with the cowl, and the screw holes were not aligned in several places. However, the PRO Screen was impossible to install as it was because the front ends of the screen lifted up when matched with the Cowl, and the screw holes were not aligned in several places. I thought about asking them to replace it, but it was too much trouble, so I decided to modify the screw holes. When we matched the two screw holes on the front side, three of the remaining four screw holes had to be modified, and the worst one was gapped by one screw hole. The processing itself is not difficult since it is just a matter of using a file to cut and widen the holes, but I had to do this to a brand-new product, which caused a large mental damage. I put it on the cowl several times, checking the position of the screw hole, and carefully shaved the screw hole to avoid cracks.
I like the shape, but this was a disappointing purchase. The instruction manual included in the package said that it is handmade and may have some distortion or need to be corrected, but I did not expect that it would need to be processed like the dubious cheap products it is. I was disappointed.
View detail
Wind Cutting sound
We replaced the H2C Shield with this Smoke Shield.
I am not sure if I am big or not, but the Wind Cutting sound is very loud!
View detail
Processing required for 2021 MODEL
[How is it used?
Was the one you received as per Image? As per Image
How was your experience with it? It has some effect.
[Points to note] Unlike the description, 2021 MODEL can not be installed because the position of Screw is different. It is necessary to process and devise.
How did it compare to other products? I have purchased this product several times and it is as good as any other.
Other items that would be helpful
Opinions and requests to Manufacturer:The explanation is too vague and I think there are people who misunderstand. It cannot be attached to the current MODEL.
View detail