Reviews
Maybe not, but it's a possibility.
It's only a possibility.
Headlight will melt
I can't think of any other possibilities, so it's just a possibility.
I contacted Manufacturer.
Thank you for your purchase.
Thank you for your inquiry.
We believe it is highly unlikely that our LightShield will melt or go bad.
And no such incidents have occurred to date.
It may be different because I received a reply that
Headlight is about 15,000 yen for 2 parts.
Also, it can be installed without modification.
Widening the holes in the mounting section allows for installation similar to OEM.
The braid on the edge is always stretched at both ends and doesn't stick properly, so I think the only way to attach it is with double-sided tape.
View detail
It creates weird turbulence.
I don't know if it is because of the seat height, but turbulence occurs around 60km/h and the wind hits the helmet and shakes my head. Even if I changed the angle, there was no change. I knew that the top speed would go down, but it was the worst because I was shaken and became uncomfortable. View detail
Kawasakiz1rScreen fixed Bolt
Screw length short, Nut can not be tightened, so I tightened it tightly and it cracked sleen. (>_<) View detail
I can't cancel the order even though the delivery date is undecided before payment.
I can't cancel the order even though the delivery date is undecided before payment. View detail
Poor accuracy, requires machining
If the mounting holes do not fit, the Instruction Manual states that the holes should be machined, but this is not a Level to be fixed by File.
I reworked it in three places and installed it a little tight, but when I ran it home, it was cracked. I'm not sure if I pulled a HaGap on some lots.
My installation skills are at fault!
View detail
Fits: HONDA SUPER CUBC125, HONDA SUPER CUBC125
There is a problem with the delivered product.
First of all, there is a problem with the packaging. The plastic wrap was torn. Bolts, nuts and washers are rolling around in the box. Thanks to this, there are no washers fastened to the windscreen. Second, the height and angle of the cradle mount are completely different. I adjusted the joint to set it, but there is a limit and I can't level it. I'm really angry. First of all, there is a problem with the packaging. The plastic wrap was torn. Bolts, nuts and washers are rolling around inside the box. Thanks to this, there are no washers that fasten to the windscreen. Second, the height and angle of the cradle mount are completely different. I made the setting by adjusting the joint, but there is a limit so I cannot level it. I'm really angry. translated by Google Translator View detail
Accessories missing
When I checked the product after it arrived, I found that the attached parts were missing and could not be installed. Lack of inspection and confirmation of the product before shipping is a problem. View detail
I want to cancel it.
I ordered one but couldn't wait for delivery.
We would like to cancel it.
If only the delivery time could be a little faster.
I'll think about it and let me.
I was looking forward to the product coming …
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
The quality is worth the price
It cracked in one run from the mounting area
It has become a cheap purchase
Because the transparency of the screen is good, it may be good for those who don't put out the speed too much It is not
View detail
Expectations Ha Gap
I installed it on the H2 SX SE+ The Large size of the mounting hole is not correct
I widened the hole to allow the well nut to enter
If this is the case, the inner cover will be distorted by the unreasonable force applied to the cowl during installation
It takes quite a bit of hole positioning to attach it to the Beauty
As far as wind protection goes, I didn't find it as effective as it looks
The wind cutting sound is so loud it's almost annoying
I will replace it when it is released by MRA
View detail
It didn't work (I didn't use it)
I didn't like it and removed it immediately because the accuracy was bad and the light cover, etc. was distorted
The included bracket also has a curved side and a flat side, but the Quantity:Pair (for Left and Right) The same thing was enclosed
It's the part that you can't finally see from the outside, but honestly, it's weird
I thought about machining and installing it, but I didn't feel like doing that much
View detail
If it's not available, it's Garbage
The installation hole of Bracket is small on one side, and you have to turn the bolt to get in
It's as tight as making Screw holes
This is why the Bolt is at an angle
I put a bracket on the bolt of Top Bridge
Impossible to install due to interference
I had a bad feeling when I put the well nut on because the size of the hole was mixed, but I didn't expect it to happen I didn't realize how inaccurate it was
When I purchased MRA's Screen-only products for other vehicles, it was nothing, but the Gold genus The crafting accuracy is terrible
View detail
Is useless
I think there are individual differences, but the installation hole Gap, the angle with the vehicle Gap, the included Torx bolt breakage etc. It was the worst. I am planning to purchase Handlebar Up Spacer, but I'm worried. View detail
Dame
As usual the bad quality is as good as Yamaha. As a windshield, of course, from the shape it is unstable after installation from Material, the worst for anything. When I replaced it with a touring screen of a quick-action pouch, everything was improved. Y's Dame Tame View detail
useless.
To the utmost, it has no meaning. I think that there is no one to say about Touring this. As a windshield, it's meaningless.
Quality is too bad from what from Material. It is truly Yamaha.
View detail
Can not be installed in Grom
I ordered it because the price was cheap, but it took nearly a month and it arrived.
I got it, so I tried to attach it immediately, but I can not attach it.. There is no Instruction Manual, so I do not know whether to install it by machining.
Temporarily attaching Bracket to Screen in the first place, you can not install it because the bracket is bigger than the width of Headlight cover.
It seems that it is attached only to Light of Round eyes as it is on the page of products although there is Grom in the compatible model.
Clearly, it's a fraud..
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
It is the lowest item (^0_0^)
There is no way to comment. Screw This is the lowest item whose hole position is not aligned. Screw Because holes are not aligned, we can not evaluate it. I think that you can see similar comments even if you look at other people's impressions. I am in this experience "Ai-net" I think that the product will not be purchased in the future and I think that I feel bad whenever I see this Manufacturer item at one of the Motorcycle Supplies Store. View detail
This is terrible
Accuracy was too poor to install. Thickness and shape, hole position is great Large. I thought that it was because another car model was delivered. View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Dissatisfied
Since there is no Instruction Manual, the part to be attached to the Handlebar was attached for the gathered part, but it is loose even if you tighten it or tighten it, because Screw is heavy use, it will wobble even in the temporary pair, even when Screw of the Shield part is honed and loose , This product is only for Shield, Gold items are useless. View detail
Fits: BMW R1200RS, BMW R1200RS, BMW R1250RS, BMW R1250RS
Impossible to install.
Since the goods have been sent, I entered work to install, but the position of the Screw hole was Gap and it was impossible to install. Since the position of the hole is empty at the position of the indentation of Screen, it can be thought that all the lot of this product can not be installed, rather than the position of the hole being Gap only for the product sent. It is not thought that it is a special item. Is it a design mistake rather than a defective item?. View detail