Reviews
High Screen
Installation was easy. I am very satisfied with the Large change by replacing the Screen. View detail
Fits: HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
Meter visor
[How is it used?
Purchased in hopes of changing the look and a little wind protection.
Was the one you received as per Image?
I wanted something Smallish and it was as per Image.
Was the installation difficult?
It was easy to install with no problems after reading the instruction manual.
How was your experience with it?
The look is exactly how I expected it to look, and it's to my liking.
The windproof effect is not that great since it is a Short Type.
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
There is none
View detail
For those who want a more adventurous feel...
I was thinking that the OEM screen was not long enough in terms of appearance, but I found a screen with a good length, so I bought it.
ADV can be transformed into two patterns, one with the screen lying down and the other with the screen standing up.
The standing Style is slightly easier in the high speed range if you get down a little (slightly).
I like it a lot because it is not too small, not too large, and has a different look and feel compared to OEM.
View detail
Wind protection is extremely Large.
Tell me how you are using it.
Long touring
Was the one you received as per Image?
Yes
Was the installation difficult?
The instruction manual was in DL format, but it is easy to understand because it comes with pictures.
How was your experience with it?
Wind protection effect and no body fatigue
[Included Parts:were they on?
Dedicated Screw is Quantity:2pc. Set was attached to the machine, and the rest is like using the removed Screws.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUBC125, HONDA SUPER CUBC125
Meter visor installed on CUBC125 (JA58)
The instruction manual was not included but referred to Net.
Downloaded and PrintOut just in case.
The installation itself is not difficult, as is often the case with old foreign products.
No need to modify the parts to fit delicately.
First, remove Mirror The Mirror of JA58 is
The Mirror itself is reverse threaded and the Adapter (Spacer) on the Handlebar side is positive threaded.
Note the direction of rotation.
Quantity of bars for mounting:Pair (for Left and Right) keep (an eye on)
Next, I'm going to put a Rubber covered Nut on the Visor mounted Gold thing.
One side went in smoothly, but the other side didn't go in at all, so I put silicon spray on it.
(The hole size is slightly different. Not sure why.)
Once the Visor is installed, adjust the position so that it is in the center.
Completed by tightening each Bolt a little at a time evenly.
Approximate working time is 30 minutes
Even this Size Visor works well as a windbreak against the chest.
View detail
Fits: HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
Name Chain
The Shift indicator is attached next to the LCD screen, so I installed it to shield it from the wind.
Originally, KITACO's Screen was installed, but it has been ime-chained.
View detail
Long touring
What I like the most is that there is no discomfort after wearing it and it is refreshing.
The back mirror does not interfere with the handlebar lock.
It does not get in the way when riding around town.
As for the windproof effect, I feel wind pressure on both shoulders and helmets when traveling at around 100 km/h on the highway.
The OEM Screen felt wind pressure from the chest up, which made it difficult to travel long distances on the highway.
I drove 1200 km in two days using the highway after installing this Screen, feeling moderate wind.
Large change was comfortable. 。 However, I feel that the windproof effect in case of bad weather is not high (Not tried) 。
View detail
Fits: HONDA SUPER CUBC125, HONDA SUPER CUBC125
Windshield on C125. [Color] Smokewith Color (Satisfied)
The manual on the web was very helpful and once I checked it, I was able to install it right away.
As a company that also supports the All-Japan Race, I was fully satisfied with the quality of the product.
The assembly was a lot of fun to do because it reflected all of Rider's desires during the design phase.
I would buy other parts from this Manufacturer!
View detail
It's so pretty and the finish is good
First of all, the screen itself is so pretty!!
And the ending is important for this, but the ending is so good
It was well packaged when delivered.. I didn't like the black bracket, so I plated it and installed it.
And it was especially nice that it was finished with a black nut rubber material that is attached to the screen --------------------------------- ------------------------- The screen itself is so pretty !!
And this is important, but the deadline is so good. It was especially good to finish with the black nut rubber restriction on the screen. Powered by Google Translator
View detail
Required Level
color is [Color] I have purchased Clear twice.
Once I hit the fence of a bicycle parking lot when I removed the Center Stand, and it cracked.
[Color] Clear is not registered in webik, so I will write a Review here.
The ADV150 has a two-step manual adjustment of the Screen, but the
In the initial Screen, there is almost no point in adjusting anything other than Styling.
In the low position, there is no wind shield.
In the high position, the wind is blowing from the chest up (from the base of the neck up).
This is because it is.
However, when I switched to this product
In the low position, the wind is blowing from the chest up (from the base of the neck up).
Wind from forehead up in high position (almost no wind if helmet has shield)
This means that you can add the functionality of low for hot days and high for cold days.
It is closer to OEM than other manufacturers' Screen, and has less impact on Style.
At first, I thought it was a little clunkier than OEM, but
When you break the first one, you can return it to OEM. OEM is too small and toy-like. I felt that
In other words, get used to it.
In order to make effective use of the two-step adjustment, I think it would be a good idea to make it the initial equipment.
However, the machining accuracy may be slightly suspect.
The first one feels like the top edge is slanted. Is that about right? I thought.
I bought a second one and when I put it on top of the first one, it was still skewed.
Also, the position of one of the four stop holes was quite different between the first and second one.
It may be that the first one happened to be a shoddy product, but I'll let you know that it happened.
This is a very cost-effective solution in terms of functional customization, so we recommend it.
View detail
Fits: HONDA SUPER CUBC125, HONDA SUPER CUBC125
Gadget Bar with Windproof Accessories
The C125's simple and beautiful handlebar design has been preserved as much as possible, while still providing the necessary equipment. "Smart Phone Holder." "USB power supply" "Dr-Recorder." "Grip heater" I found this product when I was contemplating how to install a
I liked the size and shape of the Visor, which looks lovely on the C125, and the fact that the Visor's mounting bracket doubles as a gadget bar. [Color] Select Clear
In terms of installation, Endurance does not include a manual with the product, but rather a downloadable specification, so young people with good eyesight can install the product while looking at their smartphones. (For those of us with presbyopia, it's easier to see if you DL and print it out)
If you read the instruction manual beforehand, there is nothing to worry about.
If you try to mount the Visor straight in front view, the Quantity:Pair (for Left and Right) The long holes of the Bracket are used in the full vertical direction. Fabrication Accuracy (Quantity):Pair (for Left and Right) The difference) may not be good enough.
When I used it, I found that the compact Universal Meter Visor itself was a bit too low for me to use. "Windshield." I don't really feel that it works as a I forgive it because it looks cute.
The Left bar is equipped with an indicator and save switch for the Drarecorder, and the Right bar is equipped with a DAYTONA USB 1 port, RAM MountX-GRIP, and Grip heater controller.
I couldn't erase the presence of the X-GRIP, but it was a choice based on a sense of trust. Still, I think the whole thing came together nicely.
View detail
Endurance Long Screen
The process is very easy and takes less than 10 minutes.
In terms of appearance, my impression before I bought it was that it was a bit long and I thought it might be bad for parenthesis.
It is a good size for me when I actually put it on.
As for wind protection, it works a lot better than OEM, although it does get quite windy after 80km.
Replacement is recommended.
View detail
Low Position is good
I commute to work on the expressway every day, and the rectification effect (high) of Normal screen was also satisfactory, but because the engine power is small, I felt the air resistance in the high position and the low position. Although the low position of the Screen made by Endurance is the same height as the high position of NORMAL, it becomes the shape which slanted, and although the rectification effect in the high position in NORMAL can be obtained with the low position, the power loss by air resistance is not felt. I don't feel the power loss by air resistance anymore. View detail
He said this would reduce the effect of the wind.
[How is it used?
Because the Screen of the OEM Product is small and has a problem with the wind-shielding effect, I expected the wind-shielding effect to a long one and exchanged it.
Was the one you received as per Image?
It was what I thought it would be, but it seems a little thin in thickness!
How was your experience with it?
I haven't tested it yet, but I know how it feels from your impressions, so I'm sure it will be fine.
[Points to note]
I loosened the 4 bolts and removed them, but for some reason 2 of them (the upper side) were difficult to remove and took a long time (this is not a problem with the product but with the Nut side of the car).
How did it compare to other products?
I thought that the other company's product was the one of H2c, but it was discontinued, and I thought about the endure RAN nature from the beginning, so I bought it this time because it was said that the arrival was May, but it came in.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
As for Manufacturer, if it is possible to attach them in the Included Parts:, it would be helpful if you could pack the Body side colors (including Rubber) 4 individually (because the OEM ones are a bit problematic as a product).
If you do that, you can install it surely.
As an installation Point
When loosening the bolt on the Windshield, it is better to be a little careful (the rubber may be deformed if you put too much pressure on it).
In fact, it was difficult to loosen because it was deformed, whether from the beginning or because I put too much pressure on it.
Because the Wrench (L type Wrench (hexagon) is necessary 5mm Large size) which has a grip hand can be done easily. I think that
View detail