Reviews
Fits: HONDA MONKEY, HONDA DAX
It is a must for RetroTuning HONDA cars!
[How is it used?
I installed OldMONKEY to give it a more retro feel.
Was the one you received as per Image?
The design is good as it is like the former OEM Emblem, and the texture of the plating is also good.
Was the installation difficult?
It is no problem at all, as it is just a matter of fitting it into the Bracket.
How was your experience with it?
I am satisfied with the Polished Parts on the old vehicle, although it is a little uncomfortable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is not a disappointment, but since it is plastic parts, it may be difficult to get a sense of the quality.
View detail
Not usable !
This decal for Honda Monkey Z50J1 Restauration ist not usable. IT`s a simple, low cost, thin decal. Not the 3M Laminat as mentioned. The orange color is faded. I will throw it in the bin. Not usable View detail
Moped Type 2 Display Sticker
For the price, it was a good one.
Durability will be verified in the future.
View detail
Motorcycle has been revived.
It had been in garage storage for more than 30 years since I bought the car, and the sticker had started to peel off. I found this product on webike by chance and bought it immediately. View detail
Bad hole position in Bracket.
The position of the hole in the bracket was not good, so I could not put it on with a pop.
It looks like I need to widen the long hole in the Bracket or shave the Bracket.
I chose the latter.
I think the texture is quite good.
View detail
The front will be tightened.
It would look great on a Honda 4minifork! View detail
Fits: HONDA MONKEY, HONDA DAX
When I say MONKEY, I mean this.
I bought it without hesitation because I thought this was indispensable when I said MONKEY in me. View detail
Parenthesis is better?
My GORILLA has a carrier for the front basket, so I used a hexagonal spacer to lower it by 20mm. View detail
high
Good design. Easy to install with Bolt On.
But it's expensive!
View detail
Fits: HONDA MONKEY, HONDA DAX
Honda emblem
The design of this product is satisfactory, but it requires some ingenuity in installation.
If you buy it thinking that you can attach it to your car, you will regret that you failed.
View detail
It looks tighter.
As others have written, it tightens up the look.
It's a bit stiff and the mounting is a bit odd, but it's solid.
Even if you push it in with force, it won't break.
I put it on the X4LD as well as APE, but the screw holes are just right.
I was able to pimp it out because it was there.
View detail
Front fork!
I bought and installed this one as Accent The look and design is good
I made a hole in the bracket sleeve part because it was a little off the threaded hole
There were no problems with the rest of the installation
View detail
Car grades Up
I bought it by looking at the comments of others, it was OK because it was hard to enter Grommet because it was installed, it was OK if it was dipped in hot water for 5 minutes, Dress-up parts but the texture was high and the car case was up I feel like.
Should it be a little cheaper?
View detail
Easy Dress-up possible!
SP made by Takegawa φ27 Front fork (Old model) It attached to.
Material : I felt hard when I attached the RubberGrommet to the Bracket, but I managed to insert it as I pushed it with the nail.
Emblem simply inserts the protrusion on the Reverse side into the Grommet.
For mounting on the car body, it is easy to use Bolt for OEM Fender and Stack to stop Bracket Screw..
I stopped Screw with Emblem attached, so I was able to grasp the interfering part. (Adjust Horn's Stay length as Horn was interfering. )
Easy to install, I was satisfied because I was able to Dress-up.
View detail
Fits: HONDA MONKEY, HONDA DAX
Processing of Bracket is indispensable.
Because my DAX is used at standard car height, Front fork seems long,
I felt a strong feeling that it was stretching.
So when I installed this Emblem sold for DAX,
I thought that it will be a little better and I bought it.
Received, opening the seal, when I applied Bracket to DAX, the Screw hole is opened at a completely different position ? ? ?
Is that supposed to be for 6 VDAX ? ? ?
Although I bought it with plenty of points, it is quite a price
There is no choice but to wear it.
In a familiar Motorcycle shop, I got a Bracket cut by Thunder and packed the width.
The width matches the Screw interval of 12 VDAX.
And we adopted the method of fixing with Bracket between 2 pieces of Washer of Large texture.
For prevention of loosening Spring washer is also Quantity : 1pc. I got in between..
Since Horn also interferes, I bend the Bracket 90 degrees and it is escaping.
I had a hard time, but the elongation was canceled and the appearance improved..
Emblem also. We are purchasing Honda OEM Parts from a company that had been producing
Plating and character design are excellent, satisfaction is high.
View detail
To MONKEY!
I mounted the classic Emblem.
Because the position of the Bracket hole did not match, we made a little elongated hole and installed it.
Emblem itself was not a problem.
View detail
Honda emblem
Got the 3 Honda badges. Took a little longer. But it wasn't because of Webike but because of the German customs. It was there for a long time. The emblems are all fine. Am happy. Thanks greetings Sven View detail
It's a classic but satisfied with it
It is good that the gap under Headlight fills up.
It's a classic Custom, but it looks nice..
Since Horn interferes, it is necessary to shift the position, but it is easy because it just changes the position of the hole.
View detail
Emblem is the best.
"Small" I installed it, but it is nice. Because I turned on Down fender, I lighted but I was lonely, but I feel tightened when Emblem is attached. I like it. It is easy to install, it was attached without any processing etc. View detail
Fits: HONDA MONKEY, HONDA DAX
Emblem I wanted to attach from before
Although I wanted to attach from before, I did not know whether to attach to Fork outside the company, but I was suffering from purchase, but since we were likely to lose BigPoint, purchase unexpectedly. Arrived on the same day and installed.
Offset was also changed Fork but safely wearing. Bracket processing was also Beauty. The gap with Fender interfere at Limit, but it is a satisfactory item.
View detail