Reviews
สินค้าสวยงาม คุนภาพดี View detail
It took a lot of work.
This is only a personal evaluation.
I got my long-held dream, MotorcycleGarage.
ask a contractor to do it for you
Directly attached to the ground. Quantities in foundation assembly.:Pair (for Left and Right) The Garage was installed in a block with Brass in the The drawing shows the air-conditioner hole, the ventilation fan hole, and the GlassSash as a quantity.:Pair (for Left and Right) I had it installed on a Quantity of SprayBond type Urethane foam because condensation is a problem.:Pair (for Left and Right) I did the power supply, ventilation fan, outlet and light fixtures myself with hanghang during my vacation to avoid Cost.
The final touch was the DAYTONA Sticker, which was a struggle.
Sticker is as thin as Vinyl Tape and cannot be applied all at once.
First of all, it is hard to peel off the reflective seal. It sticks and does not come off. I can only apply it while cutting it partially with scissors.
Fill a spray bottle with water and a drop of dishwashing detergent. Shake it well and spray it on the Garage while carefully applying it. Since air bubbles will form, the only way to get rid of them is to rub them out as you apply it.
Be careful not to pull too hard or it will tear.
I wanted to put a little more up and down, but I had to match it with Seal's upper hangers to make it Gap, so I ended up with an upper temperament.
Well, I was able to put it up, so that's good.
Is it durable?
If this were the case, I thought it would be more durable to ask a private seller on Yahoo!
Design is good
If you have purchased the Garage and are not confident about installing it, you may want to ask us to do so when you make the Garage.
View detail
Daytona stickers
Bought 4 pieces together to save shipping fees. Quality is good as expected. Look like made from aluminium foil. The size is just nice, not too big. View detail
Sticker
I bought this to get free shipping Line, but I am satisfied with the quality. View detail
For MONKEY125Visor.
I was using the same Sticker on the SIDE of Visor while installing Visor of DAYTONA, but the SIDE was damaged and I bought this Sticker to change the sticker position. I bought it because the SIDE of Visor was damaged and I wanted to change the position of the sticker. View detail
Sticker.
Purchased to cover Screw holes in CarrierCase.
I like both the Large size and design.
The rest is durability.
I like DAYTONA products because they are affordable and convenient! (´-ω-)
View detail
Favorite.
I had been using it for a long time, but purchased it again to reapply it due to a change in Tank Pad.
The previous one was used for several years, but the durability seems to be fine. There were no cracks or peeling.
I like this DAYTONA Logo.
It is also GOOD to have a variety of color combinations to choose from.
View detail
Installed in accordance with reflector for DAYTONAMotorcycle
I bought it because the number and reflector of DAYTONA are the same and the board to put the △Mark can be installed under the reflector. The board can be attached by tightening it to the reflector nut. I put the attached △Sticker on the board, but it was a little distorted. I am worried that it might interfere with the Tire. View detail
For MONKEY125Screen.
I like the design and coloring of the Blast BarrierScreen ( [Color] (Smoke), it looks good from the front. View detail
Repeat
[How is it used?
It is installed on a with ReflectorNumberCover made by DAYTONA.
Was the one you received as per Image?
This is a Repeat purchase and I would say the quality of the finish is there.
Was the installation difficult?
Due to its construction, which uses a reflector to mount it, it can be mounted on a
Easy to install
How was your experience with it?
The use of angled also serves as an anti-wind up of Tire.
[Included Parts:were they on?
With Sticker for two types of mopeds.
[Was there anything that disappointed you?
None in particular
View detail
It is easy to use and can be reapplied many times.
This product is a Pad that can be reapplied many times. Yet it has strong adhesive strength and moderate thickness for reliability. View detail
To prevent scratches on the Tank Bag
I bought this to prevent scratches on the Strap of my Tank Bag.
Once removed, they can be reused by washing with water, but it will not remove even sand and dust.
It doesn't look very good either, so you may want to buy it as a trial when you buy a new car.
View detail
The size is small, but it is the quality of DAYTONA.
[How is it used?
I'm using it for maintenance on my MONKEY125.
DAYTONA's products, and
Easy Lift Up Stand
I bought it to stick on the
(I'm self-satisfied w)
Was the one you received as per Image?
As you can see in the image, DAYTONA's Orange color is beautiful!
How was your experience with it?
The packaging was good and I received a beautiful product with no bends or wrinkles.
I was able to attach it beautifully.
The peel-off paper on the back has a slit to make it easy to stick.
It's a good feeling. (^^)
[Points to note]
Not particularly
How did it compare to other products?
I've used a couple of other Manufacturer's Stickers.
The break in the release paper is trivial.
It's very convenient.
View detail
สวยงามครับ มีโอกาสจะสั่งใหม่ View detail
Wound prevention
It is used in Z900RS CAFE when the Magnet-type Tank Bag is installed
The Tank Bag is only to be installed for long touring and this is the one that can be removed for everyday use products
My first impression is that I was surprised by the great adhesive power of the protective film when I removed it
When I try to attach it to the tank, I get my fingerprints on it and it doesn't go away (^^;)
If you put it on a curved area, it will float and make it dirty, and dust will get into it
The magnetism of the Magnet is worrying because of its thickness, but I used Goldwin's Tank Bag No problem, a car with a cowl would be large and durable
When you remove it, you can remove it cleanly
I was worried about what would happen when I was washing it, but when you wash it in water and put water on it, it loses its adhesive power When it dries, it revives
For storage, I use the protective film that came with it in the beginning
I've used it about 3 times with Ron Two and it's getting a little dirty, but it's still useful That's right
View detail
Fits: その他 , その他 , その他 , その他
Well it is such a thing
It is Mark of Front and Rear's Set which I wanted Mark to be able to keep two kinds. It will be good for a while but someday I will exchange it. Cutte IngSeat may be able to make your own, but the low price of these items is attractive View detail
It's neither good nor bad. I wonder if there is any.
Triangle Sticker
It is not illegal to paste or paste. ← certainly ...
But
If you put it on, it is still good ....
Because it is attached to this place depending on the ingenuity
How about using your Ideas, Sense?
I think it was my first time to put here (Lol)
View detail
For Tank Bag
I bought it with Tank Bag.
It is troublesome every time but it is attaching and detaching.
Removing is easy, so you can enjoy Style with Back attached and Style disconnected.
Absorption power is fine.
There are no leftovers left when you say or say.
Although it was straightforward if there was no character of DAYTONA.
☆ -1 It is troubled by curing the paste side when removing it and keeping it.
So I use the Film attached from the beginning without discarding it.
☆ Quantity if you have Film for storage : 5pcs. was.
View detail
It purchased simultaneously with the Slim reflector kit of the company. It bends 45 degrees, and since it is a Type, it becomes parallel about a Number plate and appearance is good. The price also thinks that it is handy.
It purchased simultaneously with the Slim reflector kit of the company.
It bends 45 degrees, and since it is a Type, it becomes parallel about a Number plate and appearance is good.
The
price also thinks that it is handy.
View detail
[Webike Monitor] Although he wanted only the Sticker, since the Stay also had only this product that follows together, it purchased. The Stay is attached, and if it is this price, I think that it is good.
[Webike Monitor] Although he wanted only the
Sticker, since the Stay also had only this product that follows together, it purchased.
The
Stay is attached, and if it is this price, I think that it is good.
View detail