Reviews
BlackMotorcycle
Bought as MotorcycleDecal in Black, Stripe and Quantity.:I will put it up at Set! View detail
Hardly!
It was difficult because it is a transfer type. when I put it on the tank of REBEL250, the surface with strong curve was against the tip of YAMAHA Super JOGZr Wing Black. when I peeled off the seat, the part of HONDA letters was difficult. it was torn and chipped. I bought it again and reapplied it. I tried to buy another one and reapply it, but it was still chipped somewhere. When I put it back on, I was still concerned about it, but to be honest, I am the type of person who doesn't care about details, so the next time I ride a motorcycle, I will look closely and I won't be bothered by it. View detail
I pasted it as an Emblem on the Tank!
[How is it used?
I bought this Classical YAMAHA Super JOGZr Wing BlackDesign to change the Emblem on the Tank to a Sticker.
Was the one you received as per Image?
It is Classical and Parenthesis is good as the Image.
Was the installation difficult?
It is only a matter of attaching, but since the shape is special, it is necessary to adjust the angle as well as the positioning while attaching.
How was your experience with it?
It was durable and stuck nicely until the end when it was replaced.
[Included Parts:were they on?
There is no other.
[Was there anything that disappointed you?
The design is also used for Racer replica, so it is not that unique.
▼We tried many other designs, but finally settled on the Yong Four style Sticker.
View detail
Parenthesis good
This is a purchase for the repainting of a GORILLA Tank.
It used to be the same Honda Wing Mark, but it was an old type, so I will try to repaint it this time as a New type Wing mark with Makeover!
There are many different colors to choose from, and the selection was fun.
The reverse side of the Package has instructions on how to apply the Sticker, so I would like to see it applied securely after the Tank is repainted.
View detail
Ideal as an Emblem for Tank
I was looking for a similarly shaped sticker to repaint the OEMTank The shape and size are almost the same as the Sticker of the Product The adhesion is strong and thin, so it can't be reapplied because it's too thin You need to decide where to put it before applying it The quantity of this product is very useful:I bought a set View detail
Pretty big
I bought it for PCX but abandoning the installation because it is bigger than I expected.
Size was convinced at 35 cm, but actually it was wrong.
"Perhaps Large durable" Let's not purchase at.
View detail
OK.
Product is good but I cannot understand this extremely high shippingcost for a small product (>50USD for a small parcel) View detail
I can not reposition it
Because I wanted Impact on Under Cowl so Quantity : Pair (for Left and Right) I put it on. Largeness also improved exquisely and the appearance became very good. Since I gap a bit when pasting, Logo has run out if it peels off a little. It is quite thin so it can cut without resistance. Let's paste after sufficiently positioning. View detail
Once it sticks, the feeling of tension which cannot be removed will not accumulate.Moreover, ~ in which it failed.It is really difficult to stick on a curved surface.But a result is a Cool Sticker to the extent that it is absentminded.
Once it sticks, the feeling of tension which cannot be removed will not accumulate.Moreover, ~ in which it failed.It is really difficult to stick on a curved surface.But a result is a Cool Sticker to the extent that it is absentminded. View detail
Since the car body was white and the sheet was red, the red Sticker was used. Since it is HONDA= red's Image, it sticks on right and left, and it is a Tune focused on appearance. COSPAR also does right and it is 。.
Since the car body was white and the sheet was red, the red Sticker was used. Since it is HONDA= red's Image, it sticks on right and left, and it is a Tune focused on appearance. COSPAR also does right and it is 。. View detail
The color purchased this time is a Pearl black. Although there is also a hit degree of light, and a photograph looks fairly black, gray one is an impression close to . Although it looked black by the degree of light, of course, it was not blacke
The color purchased this time is a Pearl black.
Although there is also a hit degree of
light, and a photograph looks fairly black, gray one is an impression close to
.
Although it looked black by the degree of light, of course, it was not blacker than that he imagined and it
Was.
Since how to stick is a transfer Type, as for
demand, how to stick fundamentally is adopted in positioning of a one-shot deal, but the surely more anxious one should use a neutral detergent water solution in an explanatory note at less than
1%.
It seems that it is and can perform position repair of some.
A use place is used for the part currently attached to the pure Gas tank this time [
].
If it sticks well so that
air may not enter, it is not different from
HONDA wing mark currently attached to the pure Gas tank, and looks finely.
If a Size and a color suit the direction which considers use of a
HONDA wing mark, it will be a Recommendation.
View detail
Although the Tank of the APE was equipped, it is a Just fit in Size!! The form of the Decal is also satisfactory.
Although the Tank of the APE was equipped, it is a Just fit in Size!! The form of the
Decal is also satisfactory.
View detail
a CUB -- although it seems in in the direction of riding that various kinds of VOXs are put on the Rear carrier, I think that it is sealing RVBOX460 of an IRISOHYAMA that it is popular too except a pure VOX. Since a little pure VOX has father stink, I ha
a CUB -- although it seems in in the direction of riding that various kinds of VOXs are put on the Rear carrier, I think that it is sealing RVBOX460 of an IRISOHYAMA that it is popular too except a pure VOX. Since a little pure VOX has father stink, I have also carried the VOX of the stylish Iris. The sticker of the feather Mark of HONDA was stuck on the both-sides side of the VOX as an One point. Although it was only an One point, the whole appearance became good very well. However, it is although what was necessary was to have been just cheap to a slight degree when it could do, since it was a Seal -- View detail
It was charmed by the Design and purchased. It is used sticking on a Helmet. Since it is a transfer Type, sticking requires much care just for a moment, but it is pleasing by the classic Design.
It was charmed by the Design and purchased. It is used sticking on a Helmet. Since it is a transfer Type, sticking requires much care just for a moment, but it is pleasing by the classic Design. View detail
It is a transfer type decal. It does not become, unless it positions by one shot, since it cannot perform resticking. Cautions are required so that it may not become a wrinkle, in particular when sticking on a curved surface. The result after
It is a transfer type decal.
It does not become, unless it positions by one shot, since it cannot perform resticking.
Cautions are required so that it may not become a wrinkle, in particular when sticking on a curved surface.
The result after attachment is very skillful and beautiful.
View detail