Reviews
I would also like to have a Sticker for regular Material.
I bought it to put on Goods that have nothing to do with Motorcycle at all.
The material is aluminum for Silencer, but I was wondering if there was a Sticker for other common materials such as vinyl chloride.
View detail
One point
The design is neither good nor bad.
I think it is a good design for One Point because it is quite bright Red.
NameValue is also a sufficient Brand, so I don't think there is anything embarrassing about wearing it separately.
View detail
Swing Arm Decal
Used on MD47RLY50. Easy to apply.
It is thick and seems to offer good protection.
OEMDecal's Tricolor color and
I think it is good to match and have a sense of unity.
Front fork is also available in the same design.
Will HONDALogo feel like a traffic jam?
View detail
OEMSticker
It is a YAMAHALogo sticker.
However, the image is pure White, but it looked slightly Cream-colored.
View detail
Sticker
I bought a Sticker to put on my Helmet, Parenthesis good ?? View detail
The colors, ...
Attached to the helmet along with the MORIWAKI muffler.
As you can see from the sixth introductory photo, the color is lighter.
So I put it on a Graphic-colored Helmet and the Graphic became transparent. (Photo:above)
If you are concerned about it, layer it with a single-color Base. (Photo:Bottom)
Good thing it came in a two-pack.
PS:A minor point:the cutline on the outer edge is partially gapped with the text.
View detail
Better to check before installation.
[How is it used?
Good because it is as per Image.
Was the one you received as per Image?
A few years had passed.
Seal surface is floating.
It was deteriorating.
I should have checked before installation.
There were two pieces in the package and one of them was beautiful.
After making a cut in the paper in the Seal section of the Reverse side.
Seal floating (with air bubbles)
I found it difficult to return the product because I noticed the
I applied it, but air bubbles are still noticeable.
Was the installation difficult?
Difficult to position.
Slightly, Quantity:Pair (for Left and Right) I wonder if the position of the Gap
How was your experience with it?
Good feeling
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it's new, it should be free of air bubbles.
I think, so Decal is only the first one.
I can't see it, so after I bought it, it's overlapping.
I understand the second check.
If possible, after a few years have passed.
I just wish you could have checked.
View detail
Sticker.
It is a Sticker that is neither acceptable nor unacceptable.
I use Motul's Chemical and wanted to put it on my Motorcycle.
Take care of Size when you buy!
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
Frankly, it's subtle.
I purchased this product to dress-up my PCX160 Smart key.
The Instruction Manual states Align the bottom edge of the Seal with the paste location and paste." but I knew from other people's impressions that it did not match HONDA's Logo, so I checked the position first.
As a result, it was found that the top edge would protrude if the Logo was used as a reference, so it was decided to Cut the Logo after pasting it.
If the Size was just right and thick enough, I would have given it 5 stars, but it was a little disappointing.
I would like to see a Manufacturer option with Logo printed on it instead of leaving it to Other Brand Products.
View detail
Shape is fine.
Used on a 2023 CRF250L.
The three-part design makes it easy to install by avoiding the difference between the three sections.
Normally I wouldn't be concerned about this, but looking at the recent HRCWorks bodies (AMASeries' WorksCRF), the placement of DID and Renthal's Logo is Quantity.:Pair (for Left and Right) The DID comes on the Axle side of the Rear wheel, but this product is reversed. Earlier Works bodies have the same arrangement as this Sticker.
If you don't mind such details, it is a good idea to protect the Swing Arm.
View detail
Ideal as a Repair Product
Sticker used for Silencer.
The Sticker and the other parts were torn to pieces due to a fall, so they were reattached to the new ones to hide the wound.
The base material is Material, which means heat resistant.:This is an aluminum sticker. I think it can be applied to other materials besides Silencer, but as I said, the base material is aluminum, so it can only be applied to a limited number of objects.
View detail
Almost satisfied
It's been a while since I bought it, but I put it on my Swing Arm as one point. striker's logo is my favorite, and I really like the design, The large size is just right, and the Black Swing Arm with the Red One point is a little makeover.
As usual, I degreased the object with Silicon-off before applying Sticker, but since this Sticker has almost no elasticity, it was quite difficult to apply it neatly on a curved surface. Also, the glue is not very strong, so it would be better to apply it only once.
However, the glue is not very strong, so even if it peels off, I don't think I will have any trouble cleaning up the remaining glue.
I will try again when it comes off.
View detail
Quantity:Pair (for Left and Right) Balance is difficult.
[How is it used?
Used for a dress-up, attached to a Leopard single seat cowl and the sticker dimensions look good.
Was the one you received as per Image?
I thought there was a cutout on the protective seal surface, although it was as shown in the Image.
Was the installation difficult?
Quantity:Pair (for Left and Right) It is difficult to put it on with good balance.
How was your experience with it?
Good for easy dress-up.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
As mentioned above, the LineSticker Seat itself is a transfer type, but there is no cutout on the protective seal surface or the backing paper, and having to cut along the MustacheLine was disappointing.
(Point of installation or hang)
Temporarily fix and paste with good balance.
(Instruction Manual) No
(Caution) Material that may contain both air bubbles and wrinkles if not pasted in one shot.
Opinions and requests to Manufacturer
It would be helpful if the Mount and Protective Seal have a cutout along the Line.
View detail
For off-road scratch prevention and dress-up appearance!
The material is thick and seems to be durable. I like the design, but it is not reapplicable, so be careful! View detail
Sticker on Under Cowl
It could have been a little larger. View detail
MORIWAKI Sticker
I haven't put it up yet, but it's perfect for SmallさくOne point.
It is originally to be applied at the bottom half of the carburetor, but it looks good in other places as well.
View detail
I missed it! And I bought it!
Very nostalgic purchase for my generation! However
Since it is a cut letter type, the first step is to start from the base paper with each Seat for positioning.
I tried to peel it off, but the adhesive side of Sticker
The slippery part of the base paper peeled off and came with it.
I cannot peel it off well.
I had no choice but to use Cutter to get the thin surface of the mount that comes with it little by little.
While peeling off, do not peel off from the Seat for positioning.
With care, I managed to peel it off without failure.
It's worth reprinting the old Design, though.
I'm not sure about the quality for the price.
View detail
It was different from what I expected.
Purchased to attach to Helmet.
I ordered it because I thought it was a Sticker of the type cut out with a White edge from the product image.
When it arrives... [Color] It was a Type Sticker with Logo printed on a Clear square Seat.
However, since the base of the print is processed to be white instead of being printed in Red/Blue, the colors are better than those of the general PrintSticker of KRear Sets.
It was not what I personally expected, but it is a good product and I will consider its use.
View detail
One point
Purchased for Scooter's One point.
The parts from KN Planning were used in the drive train.
Even a beginner could put it up with no problem since it is a small text-less Sticker.
It has been six months since I put it on and the durability has been fine so far.
To buy a by-the-way.
View detail
Under the mask of a righteous hero
I purchased HRCSticker for my CUB90.
I prefer RSCSticker myself, but since the CUB year is 2005, I went with HRC.
I compared FACTORYFX's Sticker with the Sticker I purchased directly from Honda before. The Blue color is also different, but this is not a problem considering the low price and the fact that I do not always look at the Sticker with my eyes close to the screen. Both Stickers feel the same to the touch. It is properly cut in the shape of HRC.
The edge of the HRCSticker is white, but it is not uncomfortable even with the beige Leg shield. I have used it in the rain a few times. So far it has not peeled off.
I built my CUB myself, not with HRC, but one HRCSticker makes me feel good. The fake brave man was me... ♪
View detail