Reviews
Upgrade suspension
Good for dress-up around the rear area.:Rather than gray, it is more in tune with the color of the Swing Arm and is closer to silver. It is thick and durable. View detail
Cut and feel good
I bought this one because the original decal had peeled off due to aging and deterioration, and I also bought this one for dress-up. Cutting was easily done with a 100-yen craft knife. The product photo is not very kind. In fact, the SIDE Decal is reversed and the DUNLOP Logo is correct. View detail
Can withstand high frequency water attacks
[How is it used?
? Weekdays from September 16, 2021 to November 8, 2023 to date.
Used by attaching it to a slippery water bottle of Ni Bird.
Always rinse with water after use
How was your experience with it?
It must have been exposed to running water (tap water) quite often, but no flaking has occurred yet.
Weather resistance is unknown as the Large portion is for indoor use.
The surface is between textured and silky.
Since it is relatively thin and follows curved surfaces well, wrinkles are not likely to occur even on curved surfaces if it is applied to Teinei.
How did it compare to other products?
I don't think I remember much about what I bought it for or what I put it on, and I don't think I'm comparing the two. Adjustment for shipping?
It is a product that can add a motorcycle element not only to motorcycle-related products but also to everyday products.
View detail
For those who want to change the exterior Image.
[How is it used?
I purchased this product, which is cheaper than the OEM Decal, to refresh a slightly scratched Shroud and Side cover that I got used.
Did you receive the item as per the Image?
The thickness of the decal is firm and the durability looks promising, the gloss and design are good, and the product is just as in Image.
Was it difficult to install?
This kind of work is... more than difficult. "A tedious process." The feeling was so strong that it took me half a day to get there.
How did you like it?
The quality of the decal was very satisfactory with almost no gapping of the mold and high quality.
Because of the thickness of the Decal itself, there is no tearing or peeling after a few falls. (Except for falls on gullies, etc.) No complaints about durability.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) Easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere even over scratches on shrouds and other surfaces without any problem, and the thickness of Decal itself makes scratches inconspicuous, making it ideal for concealing wounds.
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
The thicker fabric makes the application work a bit large, but the hard work pays off when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. You can work with even more confidence if you check out the video by searching for
[Availability and clarity of the Instruction Manual
Was there an Instruction Manual? Well, I don't think you need Instruction Manual if you watch the video before you try.
[Notes]
Object to be pasted (Shroud and Side coverretc.). The surface of the "P" should be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
Please reissue Decal for discontinued models only after a certain amount of orders have been placed.
View detail
good decal~!!
I tried to replace the front shobah of the Monkey125 motorcycle with the Olins. But it was expensive, so I wanted to give a dress-up effect with a sticker. If it's not a genuine sticker, it's cheap, but I wanted to buy the sticker as a genuine product. Maybe because it's genuine, the printing name is also good. The size is also suitable for attaching to the side of the front shock absorber. I'll use it after attaching it to the shobah. Thank you. View detail
It's cool!
I put it on the front cowlSIDE of CB400SUPER BOLDOR because I have installed Earls Gear's Exhaust System.
The black body gives a one-point effect and makes the body feel tighter.
When applying, the body must be degreased with parts cleaneretc. before it can be applied properly.
View detail
Wouldn't it be nice if it was affixed to CoilBoth Sides?
I purchased an additional BodySticker for my GORILLA, because when I installed the Body using Minimoto's Bracket, the BodySticker was facing away from me (stuck on the One Side). I recommend you to buy it at the same time with Body. View detail
This Sticker is an extracted character "Tune." It is
Please note that these are not extracted letters.
I bought it to match the Gold amount to get free shipping on my other purchases, so I don't particularly care about the workmanship.
View detail
moon love~!!
I love Moon Eyes products. Air cleaner cover (side of monkey motorcycle) I bought it to fit it. It's a prism reflection sticker, so I chose it because I thought it would be prettier if the light was reflected. It's good to see. I don't have a picture of it, but the presence of the sticker is huge. If you like Moon Eyes, I highly recommend it. I like the original sticker because it's cheap. Thank you. View detail
moon love sticker~!!
This is the second Moon Eyes sticker. I bought it to attach it to the air cleaner cover on the other side of the lettering sticker. It's a big size of about 11cm, so it stands out and has a huge presence. It's a reflective sticker, so it shines even more when it's lit at night. I don't have a picture of it on, but if you like Moon Eyes, I highly recommend it. One sticker changes the atmosphere. Thank you. View detail
mini sticker moon~!!
It's the third MOON IZ sticker. It's a collection of mini stickers. I bought it for attachment to mobile phones, various electronics, and monkey instrument panels. It's a little different from regular stickers, but it's highly satisfying with various types and quantity. Of course, the price is cheap. It's still not attached, but I'm happily thinking about where to put it on. If you're a Moon Eyes fan, I highly recommend this sticker as well. Thank you. View detail
Good looking design!
The adhesive is strong enough and does not peel off at all! The design looks great and is applied to my NotebookPC! View detail
It is good!
I was looking for a Sticker because I like Michelin Tire, but I found an affordable one among many expensive ones!
I am wondering if I should put it on Motorcycle's Box or on the light.
View detail
Quality Decal
On reciept of the product it was well packaged andallin tact, could do with a application guideto help those who have not worked withdecalsbefore that said asmall amountofsoapy water and some alignment checks and they look great with a good quality edge so doesnt stand out that its a decal at all. Only note would be to keep nice and wet on fitting as can tear if not careful. All in all cracking price and good product with fast delivery as always from Webike. View detail
Parenthesis OK
I have been looking for a White color, English Sticker to put on my RALLY50 side cowl for a while. I just found it on Webike, saw the impressions and bought it immediately.
This is the first time for me to paste a long Sticker with a cutout type.
I decided to give it a try anyway. I prepared water mixed with a few drops of neutral detergent, but it seemed difficult to design. This time, I decided not to use water, but to cut the backing paper before peeling it off, position it with masking tape, and apply it in a single shot.
When the backing paper is removed, the cover is thin and the Sticker itself is transparent. You can see the position of the text by touching it. This seems to work.
The Cowl is slightly curved, so the Right Side is a bit skewed, but I managed to stick the Right Side.
But I got distracted by the position of the first "D" when I applied it, and the first "D" was on the round recess at the Screw and Wrinkle came out too.
The longer Stickers are difficult to make. It is possible to make it with Cutting sheet, but considering the time and price, I felt it would be faster to buy it.
I couldn't get it right this time, but if you can do it as well as the others, I think it's great. The font of White fits RALLY50 well.
If there is a Chance, I will repurchase and Challenge again.
View detail
OEMSticker indeed.
Material of yzf-r25:Purchased to replace a scratched Sticker on a Carbon AKRAPOVIC.
I was quite pleased with the size, exactly the same as the OEM!
View detail
Good design
Install on Honda hornet 250.The sticker was amazing. After pasted it can't identify as a sticker looks like printed. Very thin layer with quality material. Recommend for yoshimura lovers. View detail
Good Quality Stickers
Stickers are simple film type. Good quality and sticks well. Only recommendation is for webike to consider envelopes for shipping, thus reducing cost. It came in a box enought to fit an engine clutch cover. View detail
Nissin sticker
Good quality. Perfectly glue will sticky to the body.i will recommend to who are looking for buying nissin sticker lovers View detail
Better to check before installation.
[How is it used?
Good because it is as per Image.
Was the one you received as per Image?
A few years had passed.
Seal surface is floating.
It was deteriorating.
I should have checked before installation.
There were two pieces in the package and one of them was beautiful.
After making a cut in the paper in the Seal section of the Reverse side.
Seal floating (with air bubbles)
I found it difficult to return the product because I noticed the
I applied it, but air bubbles are still noticeable.
Was the installation difficult?
Difficult to position.
Slightly, Quantity:Pair (for Left and Right) I wonder if the position of the Gap
How was your experience with it?
Good feeling
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it's new, it should be free of air bubbles.
I think, so Decal is only the first one.
I can't see it, so after I bought it, it's overlapping.
I understand the second check.
If possible, after a few years have passed.
I just wish you could have checked.
View detail