Reviews
BlackMotorcycle
Bought as MotorcycleDecal in Black, Stripe and Quantity.:I will put it up at Set! View detail
CT110 HUNTER CUB as Decal
Purchased as Decal for CT110 HUNTER CUB. I didn't expect CRF for Swing Arm to be Exactly.... I put it on after I fixed it with masti because it is divided into 3 parts. It looks good. View detail
Can withstand high frequency water attacks
[How is it used?
? Weekdays from September 16, 2021 to November 8, 2023 to date.
Used by attaching it to a slippery water bottle of Ni Bird.
Always rinse with water after use
How was your experience with it?
It must have been exposed to running water (tap water) quite often, but no flaking has occurred yet.
Weather resistance is unknown as the Large portion is for indoor use.
The surface is between textured and silky.
Since it is relatively thin and follows curved surfaces well, wrinkles are not likely to occur even on curved surfaces if it is applied to Teinei.
How did it compare to other products?
I don't think I remember much about what I bought it for or what I put it on, and I don't think I'm comparing the two. Adjustment for shipping?
It is a product that can add a motorcycle element not only to motorcycle-related products but also to everyday products.
View detail
It is good!
I was looking for a Sticker because I like Michelin Tire, but I found an affordable one among many expensive ones!
I am wondering if I should put it on Motorcycle's Box or on the light.
View detail
Quality Decal
On reciept of the product it was well packaged andallin tact, could do with a application guideto help those who have not worked withdecalsbefore that said asmall amountofsoapy water and some alignment checks and they look great with a good quality edge so doesnt stand out that its a decal at all. Only note would be to keep nice and wet on fitting as can tear if not careful. All in all cracking price and good product with fast delivery as always from Webike. View detail
Parenthesis OK
I have been looking for a White color, English Sticker to put on my RALLY50 side cowl for a while. I just found it on Webike, saw the impressions and bought it immediately.
This is the first time for me to paste a long Sticker with a cutout type.
I decided to give it a try anyway. I prepared water mixed with a few drops of neutral detergent, but it seemed difficult to design. This time, I decided not to use water, but to cut the backing paper before peeling it off, position it with masking tape, and apply it in a single shot.
When the backing paper is removed, the cover is thin and the Sticker itself is transparent. You can see the position of the text by touching it. This seems to work.
The Cowl is slightly curved, so the Right Side is a bit skewed, but I managed to stick the Right Side.
But I got distracted by the position of the first "D" when I applied it, and the first "D" was on the round recess at the Screw and Wrinkle came out too.
The longer Stickers are difficult to make. It is possible to make it with Cutting sheet, but considering the time and price, I felt it would be faster to buy it.
I couldn't get it right this time, but if you can do it as well as the others, I think it's great. The font of White fits RALLY50 well.
If there is a Chance, I will repurchase and Challenge again.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
So that you can see in the dark.
I bought it so that I can easily locate it in dimly lit places. The price is also the price, so I guess it can't be helped that it looks cheap. I chose the color White and it stands out in dim light.
It is a pricey product, so don't expect too much.
View detail
repapering
The color had faded to a Pink color, so I had to replace it with a new Sticker. The selling price was not too expensive. View detail
Fits: Others Engine Displacement Volume 125cc or less (Moped 1st/2nd Class)
Attached Screw
The idea is a great product.
The included Screw and Spacer 8mm may not be able to be installed if the Motorcycle side is thick.
We purchased another product (see photo) for NumberSecurity, and applied a 6M×diameter 18mm×thickness 3mm Spacer, and adjusted the height of this product so that it does not hit the Number Limit.
*Motorcycle is SMART DIOZ4 2004
View detail
Parenthesis or because I bought it.
I bought this because I had TSR footpeg in and wanted to put Sticker on it as well.
I like Sticker, which has a somewhat retro feel to it!
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
For Smart key Accent!
The OEM Smart key has a strong resin feel, so it was easy and convenient to apply. View detail
quite
I put the OEM Chain Cover of ZrX1200 DAEG, which is too long and wild for Accent, on the cut area.
I wonder if it's a little easy to get sand or Dust on the edge of the letters….
There are other Variations in different colors, so you can choose according to the area to be covered.
View detail
OEM400fourType Sticker!
[How is it used?
We also matched the Emblem along with the Tank paint job of the coveted Yong FourSpec.
Was the one you received as per Image?
I felt that the size was larger than the Image, but I think that's just how it is.
Was the installation difficult?
Alignment is very difficult due to the diversion of another car model.
I am especially nervous because I have failed once in the past and I assume it will be used for a long time, but it is difficult for an amateur to do so, so after the application from painting to pasting [Color] I asked PRO among PROs whom I can trust for Clear finishing.
How was your experience with it?
[Color] It is said to be a Material that can withstand Clear coating.
The durability is yet to be seen, but I don't think I will ever get tired of it because it is the Design of my dreams.
[Included Parts:were they on?
Sticker only.
[Was there anything that disappointed you?
Sticker at the time may have been like this, but the colors seem a bit cheap.
Please refer to the images etc. as Tanks of ▼Yon FourDesign are still rare.
View detail
Daytona stickers
Bought 4 pieces together to save shipping fees. Quality is good as expected. Look like made from aluminium foil. The size is just nice, not too big. View detail
cute little
I found out that MOON Goods handles it, so I ordered it along with other products.
StickerQuantity:I am happy to order stock from 1pc. as well.
View detail
3M Carbon Seat
Used on GSX-R1000R
Carbon Seat made by 3M.
If you are simply looking for a carbon seat, there are many different types available from various manufacturers on Amazon.
Recent Trend (?) is on top of the Carbon Style layer. [Color] It is a Clear layered Type and looks quite Real in the photo.
But when you buy it and get it in your hands, it”s not so bad. I'm not sure how much I'm going to be able to do with it, but I'm sure I'll be able to do it.
On the other hand, this is a one-layer Carbon Style Seat with a three-dimensional fiber pattern on the surface.
It may be a step down in terms of”realism”, but”Material:I think it is a reasonable Quality for a Carbon Style Seat”.
A notable Point of this product is its functionality.
The glue side is a groove (?) The surface is processed as shown in Figure 1, and can be applied without water or air bubbles.
The adhesive strength is exquisite and easy to apply and peel off, so it can be applied and reapplied many times, and it can also be peeled off cleanly without adhesive residue even if it has been applied for a while.
Also, if heat is applied at the time of pasting, it can be pasted while extending it considerably, so it has good tracking properties.
In R1000, it is attached as an anti-scratch pad on the side of the tank, which tends to be scratched by Pants' Rivet during handling.
I had originally applied a special colorless Seat, but it quickly became tattered and didn't last long.
This product, on the other hand, is resistant to slippage and has stuck on for more than two years without any problems.
This is a product that is often Repeat in Car/Motorcycle.
The only drawback is the price, but it is a very cost-effective product if you consider that you have to repeatedly buy cheap products and reapply them many times.
View detail
They look good side by side.
Transfer Sticker has a hard time when the temperature is low, but it's easy to put it on this season. I have previously used Color:I have purchased Yellow before, so this time I bought White. View detail
fashion starts with the feet
Buy for dress-up
Strong adhesion and no durability issues.
It is slightly Large and can be Cut.
View detail
Just paste Custom
We have used this product in the past, and its durability is top-notch. If you are applying it for the first time, it may be difficult to get air in, but it is a good idea to decide where to start and apply the first part first, and then let the air out little by little. It is a product that imitates the OEM color, so it fits MD47 perfectly. Some people have applied RALLY 50 OEM decal on the front fender, but I've already applied DirtFreak decal, so I'm not going to do that. View detail
Would you like a little more transparency after application?
I attached it to Front Fender, but the adhesive surface seems to be a little uneven. I feel that there is some unevenness on the adhesive surface.
I would be happier if the Clear sticker looked a little more clean on the underside.
I would appreciate a texture like KawasakiBrightSticker's, but if you say it is worth the price, I think it is a good enough product.
View detail