Reviews
easy to stick to
The thickness is moderate and easy to apply even on Curve surfaces.
Material:Carbon Style quality is also elegant and looks like Real Material:It is Carbon Style, so the quality is good.
View detail
To Dress-up the Homecoming Box
I bought this to dress up my CROSS CUB with a large logo. View detail
RealCarbon Seat.
I'm going to try this for the air cleaner box of the Scooter, as it's the right thickness for the surface of the curve and it seems to be easy to apply. I think the best choice is Real Material.:It was Carbon Style and good quality. View detail
I used it to cover up the wound.
I used it to REPAIR the broken Cowl and hide the marks.
I researched and practiced how to paste it beautifully, but it was quite difficult for a beginner.
It looks like a Carbon look, so I was reasonably happy with it.
View detail
Repair of scratches on Side cover
Cracked in Side cover of VTR so I was looking for Carbon Seat for repair and Dress-up. To evaluate this product "extend" I wrote that it was expected and purchased. When I got the item I thought that the coloring is now unified, but when it became the actual sticking stage I thought that it was tough because I could continue to stretch with Dryer and stretch it to match the Curve. Regarding coloring, even if it roasted and extended with a considerably Dryer, I was able to concentrate on the task of putting it at ease because there is no change and it is stable. View detail
The texture is a satisfactory passing score!
I bought it for Normal parts, seeking astringency and luxury.
This time, challenge Front fork guard.
It took 1 hour to Cut, about 1 hour to paste, but it made it a satisfactory finish.
When sticking, as with pasting of Decal, using soapy water, the R part took effect while drawing air with your fingers while applying Dryer.
There was a slightly weak impression on stickiness, at the edge Limit Cut there was a part that would float as time passed, so when you cut it it's not Limit, it's better to see a margin of 2, 3 mm.
Feeling of delicious texture and Cost do not touch and feel free Carbon "Wind" It was very satisfying that I could convert it!
View detail
I used it for the exterior Renewal
What shall we do with the faded Side cover?
Even if it gets painted it will peel off quickly and painting each time is troublesome.
Let's polish thoroughly and shine glossy?
I changed Fender and because the color is different.
Sticker sticky sticky, should I fake it?
No, I do not want to make it so lively. I thought so.
Better yet, I'll stick it over!
Peel off paint and Decal that remained in Cover, sharpen it and sharpen it with a fine sandwich.
Once the substrate has been formed, degreasing and removing.
Outline Plus Cut roughly the portion of folding back, and then stick together while sticking, while sticking the actual items together.
Durability is not high because it is not so thick and soft as Dryer's heat even about the heat.
But, I was satisfied with the beautiful paste.
View detail
Just right for One point
Appeal too much, there is a moderate presence.
Since both SIDEs are cut obliquely, you can also make a method of sticking out one method.
I felt that there was no problem with adhesive strength and weather resistance was also not difficult.
There are 3 kinds of Size.
Since it becomes a description of Size in the horizontal direction, the height is about one third of it.
View detail
A colorless sticker
Sticker itself is cut at an angle, but there is no particular problem as long as it is stuck on a flat surface.
I tried using it like this, but I am satisfied that it was quite fashionable.
View detail
Cheap, easy to use.
I used this to hide baldness and scratches on Front fork.
It was easier to paste than I expected.
However, I felt that it is better to use it for parts that do not rub too much because there is not much thickness.
It is easy to process, it is a good product because there are many quantities.
View detail
I am satisfied with the thick Seal.
The shape of this DRCSeal 100 mm and the size of each part are the parallelogram as seen, the length of the upper side and the lower side is 87 mm.
Quantity : Pair (for Left and Right) The hypotenuse is 36 mm each and the height is 33 mm.
This 100 mm of DRCSeal is the largest parallel distance from the end of the hypotenuse to the end.
I am DRC's Customization miscellaneous goods (Parts) As we use a lot, we already have DRCSeal of different size in Motorcycle.
Quantity : 1pc. Although it was blown away when it was cleaned with a high pressure wash gun a long time ago, Quantity : 1pc. Has passed for about 4 years, but it is still faded and still sticks firmly.
I pasted this DRCSeal 100 mm to my own undercover manufactured by Duralumin under Motorcycle Engine as shown in the photograph.
If you stick Seal variously, your own products will look like existing products (Lol)
This DRCSeal 100 mm is thick and it is Large strange.
It was thick enough to be Cushion even if a few rocks hit, so I thought that it was difficult to peel off and I was able to put it on a place close to the ground with confidence.
When sticking this DRCSeal, please remove the dirt and oil by using Spray which can be degreased such as Parts cleaner etc. on the surface to be pasted, and be careful not to let air enter between this DRCSeal and the pasting surface Please paste while doing.
In the unlikely event that air enters between DRCSeal and the pasting surface and it is impossible even to push out the entered air, if you pierce the DRCSeal with a hole at the tip of the needle and escape the air, Beauty Finished.
I liked this DRCSeal 100 mm (I long for DRC products) So already, Quantity : 1pc. I purchased it with Webike and I already have it at hand.
Logic around DRCSeal is transparent like Beauty transparent Seal, Logo appears to stand out and it is Simple design but it is not cheap.
Well, now Quantity : 1pc. Where to put it on Motorcycle.
Takao SealQuantity : 1pc. Just saying to put it on makes me feel happy somehow.
I like Seal when I am young.
I still like it.
By all means everyone please try SealCustom with this DRCSeal.
View detail
I chose it because I do not see it so much in Motorcycle shop.
It is nice to have a pretty marked color.
Size is also Pit Tan Ko !!!
It is the standard position of StickerTune.
If Material is also good, the price is also worth the feeling that it will not fade away.
View detail
Thanks to Merit, Demerit
GOOD!!
Easy to cut with scissors.
Beauty can be processed into your favorite shape.
I have three cards so I can start over.
BAD - - -
The appearance after pasting is cheap.
Small bubbles get in because of a thin and soft material. (Level's bubbles of somehow managed if Graphic decal does not disappear)
The part rubbing against Boots soon opened a hole.
Pasted to protect Boots and Decal rubbing against feet. Although it is protected, after all Wound is attached to this ProtectionDecal, it looks like Wound - - -
Impression that it was quite expensive as a whole.
If it protects Frame and Swingarm it may not look okay!
View detail
Carbon's Graphic is good!
The coolness of Carbon is oozing, and the place where I put it beautifully is in a state that it does not look like it stuck at all.
Because I was an amateur, I could not stick it beautifully.
I think that it is completely unknown if a delicious person cuts and pastes it.
I felt it difficult for beginners.
View detail
Frame protection
I bought it for Frame protection of KLX.
Because the price is cheap and Size is Large, I think that it is good for a wide range of protection.
I used it around footpeg and Swingarm.
View detail
Slightly small but noticeable!
A little Wound I bought it for hiding but it stands out more than I expected. The goal of supporting role is Main's Sticker ...
It's a bit small, but. Next time I will buy a little bigger yea. However, there is no place to paste.
View detail
Color tolerance is bad
If you can not keep Garage or Cover, Red fades in a few months. Although it is suitable for the price, it is faster to fade than other Sticker of the same Gold amount.
Since it is cheap, I hope to replace it, but I think that other products can be faded quickly, worse.. ○ Would not it be made in the country, I would like you to raise the quality a little more.
View detail
Good Fit feeling unexpected
The setting color of DRC MOTOLED Flasher Holder Plate used only Titanium color with Blue and Titanium color, but I felt that it was floating once again and tried it like a Carbon style. I tried to paste, I thought that only the face part is okay, but I tried various Seat sizes as well - - - Also bend the 2 mm wide part of the side (L) Folding (L) Even in the folded state of Fit it will be quite Fit, I am satisfied with the unexpected Fit feeling.
It looked good with black and unified feeling came out.
View detail
Although it is an ordinary Sticker ...
I stuck it to Transporter.
Sticker itself is solid and can not be easily peeled off but Cut feels sloppy and felt shabby.
I stopped in places that were not exposed to much sunlight, but in a very short period of time I faded like a photo.
Well price is also cheap so I'm not dissatisfied.
DRC Logo is my favorite so I will probably buy more if I fade away.
I do not recommend it to others.
View detail
Smaller than I thought.
It was smaller than I thought, so I was beat fast, but the price is reasonable.
It was not a paper but a material of VinylBase, so I put it on CROSSCUB's screen.
It's nice for a bit of Accent.
View detail