Reviews
This is a necessary mount space when mounting the long tail + kijima grip bar.
This is a necessary mount space when mounting the long tail + kijima grip bar. I've been running 3 units of z900 rs and I always have them installed every time I buy them. View detail
Good
This is a must-have item when attaching a tandem bar to a long tail cowl. The build quality is good and it is installed well at appropriate intervals. View detail
Installer's Decision
Prerequisite for description:OEM Grab Bar + Arch Long tail installation
good point
Long tail and OEMGrab Bar interference improved
A bad point
Spacer above the interference level, so it loses its function as a Pillion Bar. (There is not enough space between the long tail and the grab bar to accommodate gloves.
reference
If you want to keep the design and functionality of the Grab Bar, I recommend purchasing the Grab Bar from Archi.
In the combination of OEMGrab Bar and ArchiSpacer, the Manufacturer name (kawasakietc.) behind Seat is hidden by the Grab Bar.
View detail
For those who really want to use the OEM Grab Bar
Installation is easy, and the design and product precision of the mount itself is well done.
After installation, the rear of the grab bar was lowered, so the gap between the tail cowl and the grab bar became narrower, making it less comfortable to use.
The OEM Grab Bar looks thinner and poorer relative to the vehicle than the OEM Tail cowl, although the difference is only slight.
I think it is possible to purchase this product only for attaching an OEM grab bar to a vehicle with ARCHI's long tail cowl.
I ended up purchasing the company's Long tail cowl-specific Grab Bar, which has now been removed.
View detail
Long tail essentials
Installation was easy and accuracy was fine. View detail
No problem, but 2000 yen for this... I have a feeling that this is a good idea.
I am satisfied with the feel of the product, but I feel that the cost is a little low.
I wonder if Spacer could not have been made with cheaper Material.
It's out of sight...
Well, there is absolutely nothing wrong with the product itself.
View detail
Necessities
Installation was easy, with no particular troublesome work required. View detail
Long tail wearers
Once the long tail is installed, the grab bar must be lowered so that it will not interfere with the grab bar installation. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
To fill in the gaps in Lay-down
It was necessary to make the Screw hole a long hole. Well, it's Reproduct.
The gaps in the lay-down have been filled, and I plan to paint it black.
View detail
Best Matches
I went with the PMC long tail cowl so the OEM club bar would not fit.
The balance between the Tail and the Tandem is good because it is lowered, but the hand does not fit in the back of the Large Threshold to grip the Tandem.
In my case, it's good because I hardly ever ride with two people …
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
How to use it as a spacer collar for the suspension attachment part?
I bought it because I want to use the Grab Bar in its original mounting position after lay-down
The hole you can't see in the picture is tapered inside I don't know why it is tapered and it is over 20mm long
Spacer collars of 14mm inside diameter are not available on the market, so I am very grateful for this I bought it, but I never used it and it became unnecessary parts
Please include details of the size and shape
We would like to see the collar sold in 14 inner diameter, 22 outer diameter and 20 length
View detail
Good work
I bought it to put a Grab Bar in the PMCLong tail cowlSpec
Can be used with the OEMGrab Bar
Honestly, I think it's Limit's Clearance to grip
View detail
reasonably good
Purchased for use with the PMCLong tail cowl and OEM Grab Bar Clearance with cowl is a limit usable range
Loader Hookless, so it's used for Net hooking
With the Grab Bar down a bit, I personally like it
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
A little mounting accuracy ,,,
First, Quantity : 1 Set of 2pcs. Though I asked for it, it may be inventory clean though the package may be different
It was not satisfactory.. One was Exactly, but the other has difficulty in mounting accuracy.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I could install it without needing any adjustment this time.
Because the Tandem bar was removed, the hole became conspicuous and I was worried that there was not any place to grab the festival of handling
In that sense I think that it is a necessary part.
Our car is wearing a cone at that time, but without adjusting anything Exactly and
I did Fit. When you stopped from the back with the attached Bolt it became necessary additionally at the time of installation
It was only necessary Washer.
PMCWinterSale I bought it cheaply because it was eligible products. Overall rating 5 is the first time.
quality - I was at a loss as to how to make it 4 in terms of the quality of plating by texture, but at this price it is enough convincing 5.
View detail
Fits: KAWASAKI 350SS MACHII (S2), KAWASAKI 250SS MACHI (S1), KAWASAKI 750SS MACHIV (H2), KAWASAKI 250SS Mach I (S1), KAWASAKI 350SS Mach II (S2), KAWASAKI 750SS Mach IV (H2), KAWASAKI 250SS Mach I (S1), KAWASAKI 350SS Mach II (S2), KAWASAKI 750SS Mach IV (H2)
5 stars, truly incredible quality. One of the zinc plated spring washers was incorrect, I forgive them. Suggest a thin rubber or nylon washer to protect paint work.
5 stars, truly incredible quality. One of the zinc plated spring washers was incorrect, I forgive them. Suggest a thin rubber or nylon washer to protect paint work. View detail
Fits: KAWASAKI 350SS MACHII (S2), KAWASAKI 250SS MACHI (S1), KAWASAKI 750SS MACHIV (H2), KAWASAKI 250SS Mach I (S1), KAWASAKI 350SS Mach II (S2), KAWASAKI 750SS Mach IV (H2), KAWASAKI 250SS Mach I (S1), KAWASAKI 350SS Mach II (S2), KAWASAKI 750SS Mach IV (H2)
The chrome is faultless, it fits and lines up with the holes, and helped finish off my bike restoration. Thankyou WEBIKE for manufacturing these hard to get parts.
The chrome is faultless, it fits and lines up with the holes, and helped finish off my bike restoration. Thankyou WEBIKE for manufacturing these hard to get parts. View detail
The grab handle arrived well packaged, and prompt. The fit is exact, the chrome is faultless quality. Very nice. Happy customer here. Paul, Australia
The grab handle arrived well packaged, and prompt. The fit is exact, the chrome is faultless quality. Very nice. Happy customer here. Paul, Australia View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
It was better to purchase Set.
I saw Impression that I had better purchase separately with Stay and purchased it with a single item, but I thought that it was good for me to buy Set purchase as I was having trouble. I was able to install it for the time being with separate purchase. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
This passenger bar is made from quality material and the chrome is excellent. The four bolts and washers are supplied with the bar and the installation on the bike is easy. Everything lines up perfectly. The erticle is very well packed.
This passenger bar is made from quality material and the chrome is excellent. The four bolts and washers are supplied with the bar and the installation on the bike is easy. Everything lines up perfectly. The erticle is very well packed. View detail