Reviews
Bounce Spring does not come on.
Design is Well, I guess that's about it." target
Personally, I like most of them, but I don't think they are very cool. Also, the flip-up spring, which can be used to fully open the seat after installation, which was available with the Normal seat, does not work with this seat. The plastic part of the hinge (integrated with the helmet box) was broken due to excessive force on the spring. So I had to replace the Helmet box at the same time as the Seat. The comfort is not as good as the NORMAL. It is claimed to be lowdown, but it is not so different from NORMAL. The quality is high. The installation is very easy. I think the accuracy is high and there is no wobble.
View detail
Almost pontooned ??
Image didn't change as much as I thought it would. w
The seating comfort is about the same as OEMSeat!
View detail
3cmLowdown Seat for PCX160? Is it really lowdown?
My wife's beloved PCX160, almost one year since we bought it, still 400km,
My wife is not very tall, so her footing is a bit awkward on the PCX, and when she stops at intersections, she has to stand on one tiptoe.
It seems to be a bit large in places where the Left Side of the road is slightly sloped when touring.
I tend to shy away from riding PCX on a regular basis as well,
If it had a little more leg room, it would be easier to ride. and
I was thinking about Lowdown, and while researching on the Net, I found that this Lowdown Seat improves the footing by 3cm, so I bought it.
If the footing improves by 3cm, I would be a sole sticky myself, before I took the delivered product out of the corrugated cardboard and put it on.
First I sat on OEMSeat by myself to check the footing, then I replaced it with this Seat and sat on it, but the footing has not changed,?
I tried again to change back to OEM, but the footing is still the same...,
I called my wife to try it, but she said it was the same.............she cried
I tried on a pair of Boots with a 3cm heel and the footing was better.
It says in the product description that it improves the footing by 3cm,
I'm sure WirusWin doesn't check the footprint of individual products.
In the notes, it says that each product is handmade, so there is a margin of error for each product.
Is that the result of this?
Is the product itself leather? Synthetic leather? The back of the product is labeled "Made in Fillipin".
Installation was easy, only took a minute or two.
The product itself is custom type and looks reasonably cool, but the seating is hard.
Is it because it's new? My wife says that I can't go out for a long trip with it........
The OEM is softer and better for the same footprint.
In the end, I returned to OEMSeat.
As explained in the explanation, this is only for sunny days, as there are also holes for ventilation and rainwater can enter through the holes!
Seat cover is also needed for rain when going on long trips or overnight runs.
If this is true, I would like to return it, but the included note says that under no circumstances can it be exchanged, returned, or returned Gold after it has been installed. That means I can't try it out with the footwear on, right?
I wish you would test the footing of this product before shipping and guarantee -3cm!
I was wondering what to do.
My wife said I should keep it in storage as a spare, I cried.
I wish webike would try this product if they sell it!
View detail
The seat lock is hard, but overall I am satisfied.
We are 168cm 66kg with short legs and bought a new PCX160.
I knew I was on my toes at the time of the test drive, so I decided to buy it.
The product was not in stock at the time of order and took one month to be delivered.
The good:I feel like I'm 2cm lower, if not 3cm.
Satisfied that Helmet storage space is the same as standard Seat as described in ManufacturerSite.
Bad point:the rear is floating about 2 cm before applying Seat lock, but the lock is engaged by pushing hard.
I checked with the Manufacturer to be sure, but they said it is only a special order and that is normal.
Seat is still thin and buttocks are somewhat sore.
Overall, I recommend it because it holds Helmet storage space and improves the footing!
View detail
Conformity
I bought this seat because it was the only flat seat that fit my w175. I was very impressed with the quality of the seat, but the bolt holes didn't fit even after following the proper setting procedure. As for the tail part, it floats up too much and looks like it is forcibly hidden by a blind seat. It looks like a cockroach's butt.
I felt that the price was not worth the fact that it could not be installed in a proper way and the atmosphere of the tail section. To be honest, I was disappointed because I was looking forward to receiving the Seat for a month after I ordered it. If you want to make your car look cool, I think you should stop. However, from a distance, it looks cooler and has a better footing, so I'm happy about that.
Also, although it has nothing to do with the product, there is a possibility that dirt has accumulated between the original Seat and the Tank, resulting in noticeable scratches. In this case, the scratches will be exposed when this Seat is installed, so you should check it once.
View detail
The finish is subtle.
I installed it today and it has a very good footing.
But when I installed it and tried to unload the Seat and lock it.
It floats up quite a bit and you have to press it down firmly with your hand to lock it.
It's almost as if Seat itself is warping!
I don't have a lot of time, so I'll just use it and see how it goes.
And I don't see any place where you can make adjustments.
I'm worried that if I lock it, it will deform and fit snugly.
And when it rains, if you don't put the Seat cover on, the ventilation holes will let rainwater in!
The Instruction Manual says it, but I thought it would be better to do it without the Seat cover!
The rest is durability because I use it for commuting every day.
I also go touring in the vicinity occasionally, so I think I know how comfortable it is.
View detail
out of the question
The 12-inches on the Address?125 raised the ride height of the car, so it was not possible to install it, although it was purchased to alleviate this.
To be precise, it could not match with the body of the car, and the back of the car was considerably floating. If you push in hard, you can lock Seat lock, but it is not practical.
During the trial and error process, I removed some Parts of Seat and couldn't even return it, so it was completely jammed.
Later on, I thought this might be for the 125S? I tried the Helmet In Box for the 125S and it installed beautifully...
I wasn't wrong about the matching model, but this is the situation. Please be careful.
View detail
The only one on the SR400FI? Products that can be pimped out
When I installed the Universal Bracket of the other company, the screw of the tank side was not used When it came to installation, I was worried about many things because the back stepped on Wiring hard & wobbly After searching for it, I found this product. for Carburetor seems to have a lot to offer! But this is the only FI car?
To install it, just move the rear suspension a little bit and put it in between the suspensions and assemble it It's easy to do
The position of the Seat seems to be difficult to heighten, but you can bite something on the Bolt of the Tank side or You can adjust it by making the bolts longer
Because the seatBody has a thin cushions, the buttocks may be painful when you drive for a long time However, the posture can be flexible to some extent because of the long nose
The Seat height is lower than the OEM, which gives you a lot more legroom You can move the Throttle in a parking lot or on an incline without turning it around and moving it as you ride, without getting yelled at You can move it in Switzerland and feel secure
Unfortunately, I couldn't install the Spring in the Seat Bracket You may be able to get some good processing suggestions if you ask
Buy a great product that goes great with CHIC DESIGN's vintage rear fender I think I could
The brackets are painted in matte black
View detail
I was able to lowdown
Work to remove and remove Rubber from OEMSeat was Large strange.
The texture is pretty good, what will happen on a rainy day ...
It seems that Seat is floating in the middle and its contents are visible ...
However, the target Lowdown was solid, and in OEMSeat the heels floated, became solid foot!
The removal of Seat is the same as OEMSeat.
This as well as OEMSeat still hurts when I run long distance ...
View detail
Beautiful but a bit uncomfortable
Compared to the stock seat, you sit noticeably higher which changes your riding geometry. It feels more vintage. Long riding is less comfortable though since the seat barely has any cushion. It feels more like setting on a wooden chair. Moreover, the gap behind the seat is now visible so I cover it with a bag to hide that part. Anyway, it's fun to use this seat and puzzle other people what bike you have. View detail
Mini bike can be better
Seat high is going down a lot and it is fun because movement is conveyed to Direct. A tour of 300 km / day can be ordinarily taken. Although asses will hurt in the second half, I think that Motorcycle is like that. View detail
Cospa is so-so
Today, I installed it immediately.
Although it seems to be OEM in appearance shape, it is not good enough to make details, furthermore, the attachment part etc. Is slightly different,
It was necessary to fix it quite a bit..
SeatFront's plug-in Bracket is thin and rattling, Seib's back Rib is omitted in several places, SeatBody
I was wobbling, so I fixed it by attaching Urethane or Rubber sheet.
Also, the gap between SeatFront and Tank became large and it looked like it was not good.
Well, since it is the Other Company Product, I wonder if there is any difference between OEM and some - - -
Seat itself became considerably lower and improved with respect to the footsteps, but since Seat's Cushion is thinner by that much,
In the case of long distances, the hips may hurt?
Overall it is good, but a little more with OEMSeat etc. Three stars are the thing that I wanted the quality of.
View detail
Better or bad, ordinary Spring
If you do not mind sticking to Design, this Spring is the cheapest
Hair Pin type things may be cheaper but it is not recommended because it is easy to break
Since it is a change from Rigid mount, Position also got easier, and there was no shock that shaken the built-in
Since it is a SpringSingle Item, it is not necessary to prepare Washer of Large diameter and Bolt of M8 when installing
View detail
Well, easy!
It is easy to install with the gold tool, with Bolt! It is good to purchase.
Of course, Motorcycle also has a tighter feel than NORMAL's Seat. I am amazed by the feeling of Fit, ride comfort.
View detail
Seat position improvement
One of the drawbacks of MAJESTYS is the cramped ride, but I wanted to improve even a bit and replaced Seat.
Although it is Lowdown, since the footsteps are almost unchanged, I think that Seat of OEMOption is better for the feet Main.
The disadvantage of this Seat is that the cushion property is harder than NORMAL, so the vibration feels coming Direct.
(I am acceptable range)
At the time of replacement it is necessary to fine-tune the Seat lock part instead of poning.
The step of Normal seat disappeared and it looks nice and the Seat position got behind somewhat so I was happy to replace it.
View detail
Good appearance seat but not comfort for ong trip. For installation, not easy to install with SR400 2014 model. I needed to cut and finish the seat holder because the adapter set was not included with the seat and the lock bolts are misalignment, hard to
Good appearance seat but not comfort for ong trip. For installation, not easy to install with SR400 2014 model. I needed to cut and finish the seat holder because the adapter set was not included with the seat and the lock bolts are misalignment, hard to fix with the bolt. Anyway, i love its material and the included wirus win metal logo plate View detail
This seat has a lowdown riding position that is very uncomfortable and dangerous because it makes u slide off the seat when braking. Also the riding position is such that your legs are always working to keep you in place on the scooter. They would not con
This seat has a lowdown riding position that is very uncomfortable and dangerous because it makes u slide off the seat when braking. Also the riding position is such that your legs are always working to keep you in place on the scooter. They would not consider an exchange. View detail