Reviews
Myoga Seat
I can't get the device to work at all and I'm returning it, worst case scenario. View detail
Addressv125Seat
The Seat I received is torn and I want to return it.
I had to delete the order screen when I received the item and
And that it's an unused number to call.
I could have emailed her, but she wanted a picture of me.
They said they shipped a torn Seat and if you want to return it, you have to pay in advance.
When you send a damaged item, you pay cash on delivery, right?
In the first place, it was not an expensive item, so I thought I would pay in advance.
It makes no sense because it would be an expensive product. 。
Why should our side have to go that far?
The system is difficult to return.
I still use this Shop only for buying OEM Parts.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Is it used? Level
First of all, there were many wounds on the body and many white discoloration on the rubber parts, which was disappointing. View detail
3cmLowdown Seat for PCX160? Is it really lowdown?
My wife's beloved PCX160, almost one year since we bought it, still 400km,
My wife is not very tall, so her footing is a bit awkward on the PCX, and when she stops at intersections, she has to stand on one tiptoe.
It seems to be a bit large in places where the Left Side of the road is slightly sloped when touring.
I tend to shy away from riding PCX on a regular basis as well,
If it had a little more leg room, it would be easier to ride. and
I was thinking about Lowdown, and while researching on the Net, I found that this Lowdown Seat improves the footing by 3cm, so I bought it.
If the footing improves by 3cm, I would be a sole sticky myself, before I took the delivered product out of the corrugated cardboard and put it on.
First I sat on OEMSeat by myself to check the footing, then I replaced it with this Seat and sat on it, but the footing has not changed,?
I tried again to change back to OEM, but the footing is still the same...,
I called my wife to try it, but she said it was the same.............she cried
I tried on a pair of Boots with a 3cm heel and the footing was better.
It says in the product description that it improves the footing by 3cm,
I'm sure WirusWin doesn't check the footprint of individual products.
In the notes, it says that each product is handmade, so there is a margin of error for each product.
Is that the result of this?
Is the product itself leather? Synthetic leather? The back of the product is labeled "Made in Fillipin".
Installation was easy, only took a minute or two.
The product itself is custom type and looks reasonably cool, but the seating is hard.
Is it because it's new? My wife says that I can't go out for a long trip with it........
The OEM is softer and better for the same footprint.
In the end, I returned to OEMSeat.
As explained in the explanation, this is only for sunny days, as there are also holes for ventilation and rainwater can enter through the holes!
Seat cover is also needed for rain when going on long trips or overnight runs.
If this is true, I would like to return it, but the included note says that under no circumstances can it be exchanged, returned, or returned Gold after it has been installed. That means I can't try it out with the footwear on, right?
I wish you would test the footing of this product before shipping and guarantee -3cm!
I was wondering what to do.
My wife said I should keep it in storage as a spare, I cried.
I wish webike would try this product if they sell it!
View detail
Seat is torn
The KF18 had a good texture and was comfortable with no Seat tear after 3 years, but after the KF47, the Seat started to tear after about 3 months.
I have bought it twice, and both times, the same thing happened:it started to fray from the sewing part and spread out gradually.
The quality has really deteriorated. It's perfect for comfort.Quantity:2pc. Sold both sets.
We are now OEM and this has been sufficient.
This one has a lot of demerit, such as not being able to sit down right after it rains because it is a Type that absorbs when it gets wet.
I don't do Recommendation.
View detail
What is JAPAN Kek,.
Too big. It's too loose and loose and not at all comfortable. There is a fold over at the bottom so there is too much left over that you can't pull it all the way out. This is unusable. View detail
Could not be installed on 2LD1.
The seat does not close. The instructions say to adjust the mounting bolt if the seat is difficult to close, but the rear of the seat floats and cannot be closed without a lot of force. When opening, you have to push the back of the Seat with your weight on the top to open it. I am sorry to say that I will return it. When I put it back in the original Seat, it opens and closes normally. View detail
Fits: HONDA Claire's Coupe AF55, HONDA Claire's Coupe AF55
Wrinkle is noticeable.
The entire pull will be Wrinkle. View detail
Lowdown Seat for NINJA400R
(1) Unknown if it is Lowdown or not.
(The feeling of straddling it is not much different from the original one. Is this what it feels like at about 2 cm?)
(2) Size does not match slightly (individual difference?)
(3) Overall, I think I didn't have to replace it (it was just a spare for Seat).
View detail
lock failure
Even if the lock is securely locked, the lock will disengage when a load is applied during driving, which can be dangerous. View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90
Cannot be installed on AA-09
No way to get a OEM Bracket that can't be installed, because it won't even stick.
Just make sure you present the information correctly.
View detail
Fits: Others , HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUBC125
I am sorry to hear about the Large change.
It is a pity that Large changes only with Manufacturer's claim. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M
Too poorly made, I want to return it.
Seat on the reverse side has many peeling areas, and the texture is at the lowest level.
I am also appalled every time I see webike's inspections.
I do not recommend it as it is not worth the price.
Every time I buy an overseas product, I suspect I am buying a counterfeit product.
View detail
SeatKnob
Not good because it hits OEMSeat. View detail
Isn't the error too Large?
The mounting holes did not fit at all, requiring considerable modification.
Seat baseRight rear hole extended to the Level where Washer is not available.
Therefore, I have been pondering various methods of fixing Bolt.
The base of the pedestal must also be machined considerably, or the load on the Seat Cowl will be Large and I think it will crack eventually.
I think it will be very scratchy, so if you can't separate the two, it is safer not to do it.
View detail
Too expensive.
The construction is normal, so it is a 3. Three.
The price is very high, so it's one less item. The manufacturer's commitment to this product led us to decrease our overall rating by one point. The overall rating is one (1) because of the manufacturer's commitment to this product. The overall rating is one (1) because of the manufacturer's commitment to this product.
I have written only bad evaluations, but there are also good points. Please read the product description carefully and make a decision.
I think it is exactly as described in the product description. However, if you feel the Handlebar is too far away, it would be cheaper and more effective to add a spacer that clips onto the Handlebar Post.
I asked the manufacturer what was in the Seat with the anchoring, and they told me that the Seat had been designed to be a very comfortable ride, but that it would be a bit of a pain in the butt.
We would like you to think of it as the same material as OEM, but with a slightly stiffer image.
If you have a tendency to have sore buttocks, please consider using Gel Zabuetc. after consulting with the Dealer.
It may be a good idea to create an order-made One-offSeat using the Style/Form of your choice.
I received a response saying. If the product is going to be this expensive, it would be better to make One-offSeat.
The Helmet holder on the back of the OEMSeat is not attached.
View detail
Fits: KAWASAKI W800, KAWASAKI W800, KAWASAKI W800, KAWASAKI W800, KAWASAKI W800, KAWASAKI W800, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Questioning the Designability of Rear
The W800 Normal seat is narrower in the front, so it is not so bad. cozySeat is wider in the front, so it is uncomfortable in the crotch. The cozySeat is wider in the front part and makes the crotch uncomfortable. If I had known that, I would not have bought it. View detail
Not as good as it looks - not recommended
Looks nice in the photos, but this PMC seat came with creases in it, and is lower than the standard seat. There are TWO oother big issues with it - the belt I got does not fit, and has a sharp 'nut and bolt' that protrudes making it unusable. So if you want to use the strap, will not work See the photo attached. And it is like sitting on concrete - VERY hard. It does look good but cannot recommend. View detail
Have you actually installed this thing and used it on public roads, developer?
If you have installed this kit, you will need a tool to remove the loaded items. 5mm Allen key is needed to remove the ETCCard if you have installed the ETC under the tandem seat, or to remove the vehicle inspection card. There is a 5mm Allen key installed in the place where the Single seat cowl is removed, and it is a tragedy that a 5mm Allen key is needed to take it out. Why didn't they make it so that the single seat cowl can be removed with a single key like the normal Tandem seat? I should have used the Saiya single seat cover. View detail
As expected from Greece.
I researched the installation cases beforehand, and purchased the M6 bolt, M6 size bolt, M6 size color, etc. to fit this Seat.
I was able to fix the Right Side with the parts I had prepared without any problems, but the Left Side started spinning in the middle of the Bolt, and I could not loosen or tighten it, so I could not remove the Bolt from the MotorcycleFrame and Seat.
I had no choice but to forcefully remove the bracket that holds the bolt on the Seat, and after checking, I found out that the part where the bolt is screwed in was tilted, and it would not go in straight.
The details are messy, and I've never had a Bolt not go in before.
Two months of waiting and now this:....
I expect Webike to handle the returns.
View detail