Reviews
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
For CL250
It was comfortable for touring in the middle of summer.
It is easy to install.
I don't need it in the winter.
Remove and wash lightly.
Storage.
View detail
PetitCustom
Installed on CL250
It's nice to look at.
I've been riding for a while.
Where there is a gap between the OEMSeat and the
Where wrinkles form.
I'm sorry
View detail
No slippage!
Wet type is not slippery anyway.
The drawback is that it is too grippy, and if you don't give it firm action, you can't shift the hips with Seat.
View detail
As long as the ball of the thumb is attached, it is safe.
I was able to reach the ball of the big toe.
This alone is quite reassuring.
I'm glad I put it on.
View detail
S1000xr
The colour of the seat match my bike colour, if the seat cover have more padding , it will go perfect. It need skill upholstery personnel to do the cover. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
It was even better than I imagined.
I initially purchased it for its design and price.
Other companies offer Tuck Roll Seats for the ZrX1200 DAEG, but this product was by far the cheapest and the quality was comparable.
Only Mounting Hardware can be replaced with OEM to eliminate the gap problem.
When it arrives, the Seat is straight and requires a lot of force to install, but after a while of putting it on, it will bend to fit the car body.
The Seat height is slightly lower and the cushioning is also lower, but the width is a bit wider, which in my case has significantly reduced buttock pain.
(I was pleasantly surprised because I thought it was inevitable that I would be sore because of the emphasis on design.)
I have had it on for two years and it is still working beautifully.
View detail
If you are tall, you can't go wrong buying it.
I had a pain in the hip joint area on long distance rides from the first day I rode with the Normal seat for about 1600 km.
The effect was as I expected, the pain I felt in the normal seat was eliminated, and in addition, the higher viewpoint made it more comfortable. I felt as if I was riding in a MOTARD.
View detail
It was intended to be temporary, but it will be here for a while.
As the reputation on Net said, the front upper part was slightly floaty and heckled, but after 50 km of running, it settled in. The key is to tie the laces tightly and let them acclimate with your weight. It is inexpensive, but the Image is quite different. View detail
Please use it to prevent your buttocks from slipping!
OEM skin is slippery on both G pants and leather pants, and the buttocks are immediately brought backward by unexpected bumps, etc. This product with textured skin is a recommendation. View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1000 MkII
It is good if you like this kind of shape.
For me, it seemed a bit rounded. View detail
Fits: YAMAHA YZF-R1
More than a feature
I bought Red because I thought it would match my Motorcycle Coloring.
The atmosphere changes on Image Street.
The cushioning is very firm, with only a little tension when pressed with the finger.
The OEM ratio is −10mm, but I think it's a little bit lower. The Impact of the firmness is Large size than that.
The molding accuracy of Base's Carbon does not seem to be very good,
The position of the mounting holes was also slightly gapped, and the area where the motorcycle meets the SeatReverse side needs some small modifications, such as applying sponge.
It seems to be bearable for a half-day ride, but long distances may be tough on the buttocks, but you can undo it only then, so you don't have to worry about it too much.
This is a product that allows you to rediscover the advantages of OEMs by focusing on appearance rather than function.
View detail
A light weight seat due to it's low profile and the narrow
About quality and texture, I can confirm that the quality is great and that the material used is a black synthetic leather with a black stitching to create a tuck and roll design for a custom looking Monkey. About the feeling of use, A light weight seat due to it's low profile and the narrow design. Coming in at 1385 grams compared to the original seat weighing in at 2590 grams. Products to buy together, Since this seat is a lower profile design then original it would be ideal to add a lower set of handle bars to your cart to be able to position your upper body lower to match the seat for the most comfortable riding position. Difficulty of installation, I can say the fitment of the seat for my installation was very easy due to the simple nature of the manufacturers mounting of the original seat which translates to how this seat also mounts. Cost performance and comparison with other products, Pricing of this product is great. You receive a beautifully designed seat made from great quality materials. More expensive then the same designed seat from Kitaco. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
The effect is very Large, but it is Large strange to put it on Beauty.
[How is it used?
I made a Seat that was uncoated to Limit for footing for Attack in difficult areas, but it was uncomfortable to sit on to get to the destination. I hope I can learn to balance the two well." I found it on Webike when I was looking for a good item.
I purchased this as a measure to improve the seating comfort.
How was your experience with it?
This time, we cut corners a little and peeled off the Seat Cover once, applied this product to the position where we wanted to improve the seating comfort, and then reapplied the Seat Cover as it was.
If you would like to improve the appearance of the Seat Pad, you can cut the SpongeBase of the for Seat to match this product and then attach the Seat Pad to it.
The Gel pad is only about 8mm thick, but it improves the seating comfort. The Gel disperses the pressure on the ground surface and reduces vibrations generated by the vehicle body.
Even after a short time of use, you will notice that the seat is more comfortable, and even after a long ride, it will be harder to get stuck due to reduced fatigue, and you will not feel any pain in your buttocks.
How did it compare to other products?
Place it on top of Seat and fix it in place. Gel Zab." The same effect can be achieved with products of the same type, with some differences.
If you want to improve sitting comfort easily Gel Zab." The "M" type products are more convenient as they are ready to be removed and attached.
[Points to note]
The Gel pad itself is very sticky, so if you hold it sticky with both hands, it will be hard to get it off your hands, so Quantity:Be careful when Set.
Other items that would be helpful
The deciding factor in the purchase
I wanted a product with bare GelMaterial, I wanted to improve Seat's seating comfort.
At the time of purchase, this was the only product available from Webike that met the above criteria.
【Included Parts:presence or absence】.
Included Parts:No, there is a protective film on the front & back of the Gel pad.
(The process of removing this protective film is Large strange...the adhesive is so strong that it won't come off.)
[ITEMS TO BUY TOGETHER
If you want to use it as an inner type, you need to remove and install the Seat Cover, so use it when attaching it. Tucker. and short legs Bracket Pla." It is better to have a
If the Seat Cover seems to have hardened over time, please contact the OEM or Other Brand Product. Seat cover. You can also purchase a Refresh.
Opinions and requests to Manufacturer.
It is a very good product, but the price is high.
If the price is lower, I would like to use it for all Seat surfaces....
View detail
Great looking seat
Good looking seat. Uses oem honda base. No extra parts needed. Fits pretty good. Adds a nice shape to the bike. I chose the all black version. View detail
Fits: HARLEY-DAVIDSON DYNA WIDE GLIDE, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM
Recommended
Inexpensive and recommended!
The footing has also improved!
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Very good original parts
The seat cushion material is very good. The original parts are very stable and have great texture after installation. The ventilation effect is not comparable to that of Taobao products. It is made in Japan and there is nothing wrong with genuine Yamaha parts. I hope the original manufacturers will provide more good modified parts for nmax. -------------------------------------------------- -------- The cushion material is very good. The original parts are stable. After the installation, it is very textured. The ventilation effect is not comparable to Taobao. The place of production is Japan. It is hoped that the original factory will provide good modification parts for NMAX. Powered by Google Translator View detail
Fits: SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets G (LETS G), SUZUKI Lets(LETS)
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
OEMOption products as expected
[How is it used?
I purchased this to convert a 22 Panigale V2 to Single Seat.
Was the one you received as per Image?
The machining accuracy is good, which is natural since it is a ManufacturerOEM Product, and although it is manufactured in Italy, this level is not inferior to that of FOR JAPAN MODELMANUFACTURER.
Back part is also minimal. [Color] It was nice that it looked like it had at least been painted clear. (Panigale's plastic parts are so bad that I feel like I'm being told to replace them with carbon parts if I have a problem with them, but this one was beautiful.)
Was the installation difficult?
The Tandem seat can be removed by simply removing 6 Bolts, and the Passenger Seat Cover can be installed with only 4 Bolts (Bolts can be reused). (Bolts can be reused).
The bolt holes are also very precise, so there is no need to worry about misalignment, etc.
How was your experience with it?
What originally stops at six wires becomes four, so there is no synthesis to the extent that it is distorted when moved by hand or force is applied. However, since it is not a place where force is applied, there will be no problem.
I felt that the design of Panigale was finally unified by the single seat, and I thought that the tandem seat spoiled the design.
[Included Parts:were they on?
The bolt used for installation is the one that originally fixed the Tandem seat, so there were no included parts.
[Was there anything that disappointed you?
None in particular.
If I had to say, price.
I didn't want to buy the stones at the list price.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy when refueling
When installed, there is a significant gap between the attached Pin and Spring.
I was concerned about the Spring moving when the Seat is raised, so I fitted it with the Aluminum collar.
I think it would be easier when refueling if the Seat could be raised a little more.
Concept and texture are satisfactory.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R
Parenthesis good?
Silhouette from the side is the best!
I ride my Motorcycle every holiday to sit on this Seat.
I thought the lower Seat height would make the knees tighter, but the Large is sturdy! (Height 170 cm, short legs)
The handlebar is also raised, so it is almost in a vertical position.
Instead, there are no more gaps than in NORMAL. (16 year old ZrX1200 DAEG) No complaints at all.
It was also very fast from the order!
View detail