Reviews
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
PetitCustom
Installed on CL250
It's nice to look at.
I've been riding for a while.
Where there is a gap between the OEMSeat and the
Where wrinkles form.
I'm sorry
View detail
Fits: Others , HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUBC125
I bore up CUB to Yellow color Number so I can Tandem!
Bore up the CUB PRESS from 50cc to 75cc and changed it to TandemSpec. I changed the cargo bed to a SUPER CUB one, but I had to drill holes and modify it to install a seat on something that could not be tandemed in the first place. Customers are responsible for their own use! View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
Now you can Tandem!
It took a little bit of effort to install it, as it feels like it requires a lot of hang and you have to push it in. It is a little difficult to install unless you are careful. View detail
Not as good as others.
Seat covers are not easy to install on any product, but I felt that this product was not particularly easy to work with.
First, remove the Seat by removing the 10mm Nut, then place the Seat cover over the Seat while pinching the tip of the Seat cover onto the Hinge to secure it in place so that it will not move. After that, adjust the entire piece by pulling it, and tighten the string to secure it in place.
This string. If you pull too hard, it will break." The note said, "It sure looks like it is going to cut.
However, there is some concern that the Seat cover may come off unless tied down very tightly. Holdability is that low.
First of all, there is a possibility that the string may break during installation, and if it is loosely tightened, there is a possibility that the Cover may gap or come off.
I don't know how it will turn out because I haven't used it yet, but if the Cover seems to Gap, I'll tighten it more in preparation for the string to break.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
Comparison with Komine products
After installation, I did a day-touring trip of about 500 km.
(*CROSSCUB110, replaced by Seat of JA45.)
Having previously used a similar product made by Komine, I leave you with my comparative impressions.
Both are easy to install, and I don't think there is any difference in fit between the Large and the Large.
Airflow during driving was not much different because of the leg shield? Not much difference.
Cushion nature is not to your liking at first. A sense of change I preferred the Komine one because it is larger than the Takegawa one. However, in fact, Takegawa's Mesh fabric is more comfortable for my buttocks when I use it for a long time. The reason is that Komine's mesh fabric is larger in diameter, and I feel a little bit of damage when I run long distances.
Both of them are good because they do not steam easily, but as for Takegawa's product, unfortunately, it is easy to slide forward during Brake sudden braking.
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
Although it does get a little cooler.
[How is it used?
I put it on my D Tracker 125.
Was the installation difficult?
Simply remove the Seat to install.
How was your experience with it?
Hip swelling can be reduced by about 20%.
[Was there anything that disappointed you?
It absorbs water, so if you sit on it the day after it rains, your butt will be soaked.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
Design is my favorite but…
The quality of the OEM Equivalent Product and the appearance from the side is also good!
I was happy to go out touring but it was torture… hard, it's like sitting on a log!
If you're a Touring Mainer, you'll probably choose the OEM one.
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
It's Neck that sucks up the rain.
It's a little cooler.
However, the day after it rains, it absorbs a lot, so it may be too delicate for daily use.
View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA ADV150, HONDA ADV160, HONDA PCX
Seat cover
Cushion performance is not so good. The cushion performance is not so good. It is for those who want to change the appearance. It's not a great recommendation, but it's not expensive either, so it's a light recommendation. View detail
Maybe it's a product that varies from person to person?
Purchased and installed to prevent buttocks from getting steamy.
Installation is perfectly fine and ExactlyFit.
The key is the ventilation effect, but I couldn't feel it at all.
Maybe it's influenced by body shape, clothing and driving posture?
Because of the hard and slippery surface material, if you put the glasses on the Seat, they will slip off and it is very difficult to wear a helmet.
If you're a Glasses girl, you might want to be careful.
It's more of a Demerit for me and I removed it after a few uses.
View detail
Fits: HONDA CT125, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CT125
It's fading too fast
To install it, just put it on, adjust its position, and pull and tie the tightening string
And comfortable "Cushion" It's so good that it is
I use my motorcycle every day on my way to work, and I don't cover it, and I don't hit it in the sun almost all the time I was there, but after a year, the color of Red in Rear started to fade... after a year and a half It felt like a no-brainer
It's functional, so I'm using it as is, but I think it's fading a little too quickly ( (I think it's fine if it's AllBlack)
It's a shame because I'm happy with the functionality of the product
So I gave it a quality/texture rating of 1
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
Sewing is not good
I installed it in CROSS CUB.
Because it is ExactlySize, I will pull it slightly but it was torn from the sewn part...
I sewn again without hesitation.
It may be individual differences, but it is regrettable.
Mesh part is somewhat effective.
View detail
Fits: Others , Others , HONDA MONKEY125, HONDA MSX125SF, HONDA MSX125, HONDA Dio, HONDA DAX50, HONDA Ape100, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA GROM
Not Seat cover, OEM Seat is bad.
I tried to use OEMSeat which is a torture base as it is and tried on this Seat before trying to buy expensive Seat. Because it is a Universal Product, it does not feel like Exactly to Seat. It is a problem of appearance. Surely breathability may be good, but is it a feeling that Damage to the butt has been slightly alleviated more than that. I can not say anything because I ride only about an hour, but it seems that the torture pedestal became a parochial chair. I wanted a bit more Cushion sex. View detail