Reviews
I own a dirt bike, HONDA CRF250L. The color of the OEM seat was HONDA Red. It gave the vehicle a mild impression. I replaced it with this black MOTION MX Gripper seat and now it has decency. All you have to do is cover the red OEM seat
I own a dirt bike, HONDA CRF250L.
The color of the OEM seat was HONDA Red.
It gave the vehicle a mild impression. I replaced it with this black MOTION MX Gripper seat and now it has decency.
All you have to do is cover the red OEM seat with MOTION's MX Gripper Seat. I placed a gel cushion underneath it.
To avoid unevenness I placed cushion under the tandem section as well.
This MX Gripper Seat is attached to the seat only with stretching adhesive tape on the back but looks as if the whole seat has been re-covered.
The material is flexible enough to tuck cushions inside and allow great appliment.
The material is thick enough to avoid falls but can be easily cut with scissors.
I give this MX Gripper seat five stars.
Because it can be used together with the original seat and you can place cushions inside and outside of the seat not disturbing its appearance. It's highly recommended.
The front part of the seat near the tank has 3D-dimensional structure that fits so perfectly that it look as though it was there from the very start.
It was embarrassing to have the gel cushion placed on top of the seat. I'm happy now. Thanks to this, there's no need for me to be embarrassed any more.
The material is ideal for a seat and will offer stability when you're seated. Even on rainy days.
View detail
The Seat side was deleted in order to improve with a guide peg by XR250 (MD30). By exchange, the Seat cover was also exchanged for this product at that occasion. Although re-covering is the 2nd times, it is difficult too. Pure lay could not be ext
The Seat side was deleted in order to improve with a guide peg by XR250 (MD30).
By exchange, the Seat cover was also exchanged for this product at that occasion.
Although re-covering is the 2nd times, it is difficult too.
Pure lay could not be extended easily, either, and since it was slightly hard, it was hard to stretch.
The Wrinkle never disappeared by the curved portion of the Center, but it considered it as completion by abandonment as it was.
Since it was an Off vehicle, it decided not to care.
A Grip is good.
In case of a Jeans, a weight shift is impossible, unless it rises to its feet.
Furniture is good in case of the Nylon of Moto bread.
When letting it slide, applying weight to a sheet when pure, the weight shift also had the advantage made immediately, but in steep hill going down, it had to slide freely and had to straddle.
I grip firmly in that respect in case of
all Gripper, and think that it is good -- excessive power is not applied.
However, it fell, and there was meeting etc., also when it is hard to move the position of the hips when unexpected judgment is required, and getting impatient.
(Such a thing cannot be found if it is an upper person, but it is beginners' talk)
Appearance is deep-black and modest.
appearance -- it is the touch which became heavy.
View detail
Since he wanted the blue sheet, it purchased. When were investigated in a net etc., and there was even a hand tucker, ... which can carry out DIY and meets was thought, but the tucker needle which was sweet and which was spoiled [ that it is difficult
Since he wanted the blue sheet, it purchased.
When were investigated in a net etc., and there was even a hand tucker, ... which can carry out DIY and meets was thought, but the tucker needle which was sweet and which was spoiled [ that it is difficult unexpectedly (__;) and ] is countless... I gave up and asked of the motorcycle store.
Since it is carrying in, as long as wages do not have a wrinkle less than 5000, either and it is very diffident in the track record (it is [ It is cheap? ] high ?) considerably given to the beauty,
It seems to be good to carry out dependent on a pro ^^ Since the sheet skin is a vine vine when the grip of a sheet is a motorcycle of 笙ェ a decade ago which is quite good touch, the recommend of changing into Colet by all means is carried out.
If several more colors can be chosen individually, I will think that it was better.
View detail
It purchased for XR250 (MD30) business. Re-covering, and of course and the grip which are the touch also with the sufficient familiarity by a form which can be done simply are cinch!!
It purchased for XR250 (MD30) business.
Re-covering, and of course and the grip which are the touch also with the sufficient familiarity by a form which can be done simply are cinch!!
View detail
Quite good! Although the normal seat of KSR had to have tight anteversion, and I who am 180 cm had to get on, or it had to become, and it had to sit down back, and the body had shifted before in breaking, after equipping with this, it could hold calmly.
Quite good! Although the normal seat of KSR had to have tight anteversion, and I who am 180 cm had to get on, or it had to become, and it had to sit down back, and the body had shifted before in breaking, after equipping with this, it could hold calmly.
However, since wearing requires a hang, he would like to call it a five stars, but I will consider it as four stars.
View detail
Since the gripper seat cover was used and it had said mind by other motorcycle, it purchased for two-set Sakka. But it is hard to slide, it is easy to carry out a weight shift. It is recommended.
Since the gripper seat cover was used and it had said mind by other motorcycle, it purchased for two-set Sakka.
But it is hard to slide, it is easy to carry out a weight shift.
It is recommended.
View detail
Since it used and was before pleasing by D trucker, it was used for the sheet of KSR this time. About re-covering work, unlike [ case of KSR ] the ordinary off-road motorcycle, since the sheet was small, sewing lines did not suit and suffered troubles
Since it used and was before pleasing by D trucker, it was used for the sheet of KSR this time.
About re-covering work, unlike [ case of KSR ] the ordinary off-road motorcycle, since the sheet was small, sewing lines did not suit and suffered troubles, but.
If it is the sheet of a general off-road motorcycle which was able to be stretched without also making a wrinkle, the work contents which may be made more comfortably stop a front side first.
Next, it pulls thoroughly and stops the backside.
Similarly the rest pulls both sides thoroughly, strikes a tucker and goes.
Is it a hang which is pulled with all its strength anyhow?
Although it slid before trailingly until now at the time of a brake although it was the touch which rode, and a position was not able to be taken well, when it was this sheet, the body can be fixed firmly and the favorite position could take.
To those something by whom it becomes easy to slide and is torn [ it is sufficient and ] with the old sheet, I think that it is recommended.
How about challenging [ re-covering ], since it will be the work which is possible by itself if you buy a cheap tucker in a DIY store?
View detail
It was used for RMX250S. Although it was the first this time, the grip did not become brave, but it was not necessarily hard to move it, and it was rather good. [ of comment after being able to stick comparatively comfortably also with the cheap tucke
It was used for RMX250S.
Although it was the first this time, the grip did not become brave, but it was not necessarily hard to move it, and it was rather good. [ of comment after being able to stick comparatively comfortably also with the cheap tucker and riding ]
View detail