Reviews
The ultimate cafe seat.
The Myoga seat is lower and better looking than another aftermarket low seat I had purchased before. My heels are 2mm from the ground where before it only my toes touched the ground. This seat is also more comfortable on long rides. It was also less expensive than the other seat. Thank you, Webike. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA CUB press 50, HONDA LITTLE CUB, HONDA CUB press 50, HONDA LITTLE CUB
Difficulty in weather resistance
Why is it that everyone is so quick to exchange to NORMAL? I was wondering,
Now I know why. After about a year of storage under the eaves, the surface hardens.
ParisParis and tear it up.
View detail
Fits: KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom, KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
It looks better, but ….
Not so effective in preventing RS ass pain ^_^ Better than OEM, but …. The price is low, so I recommend it to those who can afford it. View detail
Fits: YAMAHA 4-inch CYGNUS X125, YAMAHA Type 4 Cygnus X125
Non slippery
Slip resistant, tuck roll, Carbon Style pattern was cool.
Lowdown Seat, but it didn't change much.
The middle step is no longer a concern.
Seat Cover cracked and tore in less than a year.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
PMC Seat looks good but not most comfortable
The PMC Tuckroll seat looks great. It is very lightweight also. However it has a particular fit and for me was not very comfortable. It as a pronounced scoop in the rider's portion and it limits movement of the rider while compressing the crotch area. For a male the presure on the crotch is especially uncomfortable. The cover material is also a bit too slippery. I imagine it's good for waterproofing but while aggressive riding it slips. View detail
Changed from Normal seat
The Eliminator is popular for its good footing, but … it was a little low for me and my feet were cramped, so I introduced this Seat.
I was honestly surprised to see such a change just by going up 3 cm from NORMAL.
I have been using it for a few years now, and I am very happy with it.
View detail
Myoga Seat
I can't get the device to work at all and I'm returning it, worst case scenario. View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
Tanaka Shokai (TANAKA) Tanaka Show Kai Seat StopperRubber Se
It is a good product that fits perfectly. View detail
great seat cover
seat cover fit great and loops over each end of seat for easy installation. No matter how much stretching and how many staples I used, there's a couple wrinkles.The color looks good, but doesn't match OEM. It's a little darker.Lots of grip ! It took a couple days at the to get used to it. Night and day difference from stock.Use 6-8mm staples when you install or else it doesn't stick View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
measures to deal with a shortage of labor (labour)
Design, texture is very good, but the pain is painful ?? may not be very effective…. View detail
hmm
I'd bought the CB250R before because I'd heard it had a bad footprint.
I'm going to put it on.
Quality is good, almost OEM Product quality.
Almost indistinguishable from an OEM sheet.
The seat feels a little thinner, and the corners of the seat have been removed.
However, I don't think we should expect a Large width footprint improvement with this seat.
It's just a little bit. It's just a little bit. I feel like I have better footing.
View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
It was nice that it arrived a month earlier than promised.
There was the inconvenience of having to use the rubber washers on the original seat, but it fit very well and had a dress-up effect and did not lean forward.
Because it is a functional tuning product, you can purchase it without hesitation.
The inside of the seat is lined with vinyl and stitched tightly, making it a very reliable product.
I don't know about people who haven't used it, but I think those who have used it will continue to use it in the future.
Trust and try it~ ---------------------------------------------- ------------ There was the inconvenience of having to use the rubber washers on the original seat, but it fit very well and had a dress-up effect and did not lean forward. Because it is a functional tuning product, you can purchase it without hesitation. The inside of the seat is lined with vinyl and stitched tightly, making it a very reliable product. I don't know about people who haven't used it, but I think those who have used it will continue to use it in the future. Trust and try it~ Powered by Google Translator
View detail
Fits: YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Effective in rainy weather and midsummer
[How is it used?
In use on NMAX 155.
When I ride in the rain, the seating surface gets very wet, so a friend of mine recommended that I purchase one.
Was the installation difficult?
It's very simple
Simply follow the instructions in the Instruction Manual to cover the Seat and fasten the back of the Seat with Magic tape.
The markings are also provided so that the front and back will not be installed backwards.
How was your experience with it?
I got lucky (?) the day after I installed it. It was a rainy day, but it worked!
The ride was comfortable with no uncomfortable wetting of the seating surfaces.
The improved ventilation will also reduce the heat of the Seat in mid-summer, which we will experience a little later in the year.
There is no movement of the mesh cover during driving, which is good.
[Was there anything that disappointed you?
It's not a disappointment, but I can't wipe the Seat without removing it each time, so it looks like it will get dirty inside if left unattended to some extent.
Perhaps due to the Belt fastening at the back of the Seat, closing the Seat now requires more force than before.
View detail