Reviews
Size is delicate for my Motorcycle.
The space under the Seat of VSTROM250SX is a little large, so I decided not to paste it. I ended up throwing it into the Rear box. I could have used a normal container if I wanted to. View detail
The workmanship is crude.
The reputation is so-so, so I bought it. It was installed immediately.
I noticed during installation that one of the holes in the mesh was frayed, which was disappointing.
I am wondering if I should request a replacement, but I am hesitant to do so considering the time and effort involved.
View detail
Effective use of dead space in Top case
It was just the right size for attaching to the back of the top panel of the Top case.
The storage area with a fastener can hold a large size of the vehicle inspection book.
It may not work for Seat, a recent sports type motorbike, though,
It would be useful for a Scooter with a wide Seat, etc.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT
I bought this for Seat protection.
The installation was easy, but the belt on the OEM product could not be exposed, so it had to be covered. It's a pity. View detail
![COZY Seat [COMP]](https://img.webike-cdn.net/catalogue/images/101907/24316_TS.jpg)
advantages and disadvantages
When I was using STD Handlebar and Normal seat, I had a bad leg position and my back was sore when touring, so I bought this Seat to improve the leg position.
Thanks to the slightly lower seat height, the footing is improved and my back does not hurt anymore. The only drawback is that it is difficult to engage the seat lock when installing the seat.
Personally, it is the right product to buy.
View detail
my, my, my (expression of wonder, surprise, etc.)
It's just like this. View detail
![COZY Seat (COZY sheet) [ 70 s Series ] Type F](https://global.webike-cdn.net/photo/impression/ca/cacd428448e80f0c3658dce60e1af83cL.jpg)
Fits: HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB750F
cb900f
It is not made of Sponge, but of UrethaneBase, so there is a sense of solidity.
The OEMSeat of CB is fixed with Suction Cup at the back of Tandem side, but the COZY seat doesn't have Suction Cup to fix, so it is flapping.
It's fine when you're not in the car, but when you are, there's a gap.
View detail
There may be chemistry.
I was using another company's Gel Zab, but I didn't feel comfortable with the way it was fixed, so I looked elsewhere and found this newly released one and ordered it immediately.
As expected of a latecomer, the installation method was wide enough to fit any type of Seat.
I was able to fix it firmly on my Seat. However, the Gel is hard and the effect of Gel Zab itself was better than other companies.
After that, the seat height becomes about 1cm higher because Gel is hard, so the footing becomes bad. If you use the included Mesh cover, it will be even higher, so be careful if you have limited footing.
This harder Gel may suit some people, but it did not suit me.
It was a shame because the installation method is JUST right.
View detail
be too hard
I bought this because I like Stitch's Pattern.
It also has better footing than OEM.
It's just a little too hard...
It's pretty tough after 200km or so.
It hurts my butt, but it also hurts my back.
I weigh about 75kg and it sinks a little bit, so I think women or lighter people will hardly sink at all.
I think it's well made, but the surface is too shiny, so I think there are different tastes.
View detail
The Tandem seat was torn
I've long noticed that the Tandem seat is torn, but I've been tandemming and There's no one to give you a replacement, and the leather is out of stock, so don't look at it I've been riding with them
However, when you notice the tear in the Seat, it becomes Large with a great speed The Tandem seat also opens its mouth like a gold box, and I don't want to put my bag in it It was like becoming a
The performance is solid, and even after a year of use, this Seal stood out to me It doesn't show any signs of peeling off It looks great and it doesn't bother me at all from a distance
If you have a hole in your seat and your butt gets wet every time it rains, I can definitely recommend it to It is
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S
My horns hurt
The COZY seat is a DAYTONA product, but the front corners of the COZY seat are gently sloping for better footing The RIPMOSEAT has a corner of Seat and the corner of Seat is in the way when stopping It's hard, and the wide seat surface makes my thighs ache when I'm stopped 。 The WaterproofSeat is on the Sponge, so it can't be beveled, or worse It is
The good news is that the Seat is now stiffer and less tired than before
View detail
Use in other applications
i bought a Helmet with Visor, but it has an anti-reflective Seat on the inside Because it wasn't there, when I hid the sun's rays, they were transparent The glare was not a problem because it prevented the glare, but when it started to bother me, I would only look there Think about what to do
In the meantime, I was looking for something that could be glued with synthetic leather Seat, and I found the Repair material from Seat Because Size was also Large enough for 110×170mm, the use of this product is I decided to buy a different one
I made a pattern and cut out the Seat and stuck it on the Visor, and then stuck it on a curved surface The edge part came off immediately It was said that the adhesion strength was weak, but I didn't expect it to be this strong (ω`)
The key objective of preventing light from penetrating through it has been achieved and it blends in with the appearance without any discomfort, so I'm happy with it It's hard to fail if you choose a flat surface rather than a curved surface when you attach it
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100 typeI, HONDA CB1100 typeII
Daytona Cafe Racer Seat
Seat is of good quality,however seat is too wide for bike in my opinion.It is hard to tell from photo, Side on looks great,.If seat was no wider than original seat then i think they would of nailed it , View detail
![COZY Sheet ( COZY Sheet ) [ COMP ] Short Low Plane](https://img.webike-cdn.net/catalogue/12489/41109_1_l_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Let's check the conformity year
I intended to install it in the 2013 model of SR 400, ordered..
I thought that there was no product of the type that the gold tool did not match at all and returned, even if it returned, I forced it to process it.. ー ー グ ラ グ Although it feels unstable, but Seat itself is solidly made, and it will regain returning as well as being able to satisfy the sense of one's body even when Cornering is regrettable.
As far as I had purchased a lot of DAYTONA products, I was satisfied with all of that and had a sense of trust, I wanted more accurate and accurate description of conformity information. The evaluation of three stars was that part, if there was not there were five stars.
View detail
I did not use it after all
Due to the Headlight exchange of DRZ, I felt the necessity and purchased.
Although I did not use it as a result, I think that the feeling of Sponge is moderate in elasticity, even if it is used somewhat for miscellaneous problems.
Why is it made by DAYTONA.
View detail
To Seat repair of GILERA RUNNER - - -
GILERA RUNNER makes the tip of Seat easy to break. I bought it as for Repair of its tip part.
good point
- Easy to wear because it just sticks
A bad point
- It is difficult to color
- It is difficult to paste at a tip portion or a plane
Although a little bit different in taste, it is not understood if it is seen from a distance. It has not peeled even after three months..
View detail
![COZY Seat [LITE-S]](https://img.webike-cdn.net/catalogue/10054/77676_1_TS.jpg)
Since the position of the hole of a Bolt did not suit attachment, it took time somewhat.The sheet is the touch which was not slippery and became brave compared with the NORMAL.Since the NORMAL is softer, I would like to merely compare cushioning prope
Since the position of the hole of a Bolt did not suit attachment, it took time somewhat.The
sheet is the touch which was not slippery and became brave compared with the NORMAL.Since the NORMAL is softer, I would like to merely compare cushioning properties on a Touring.It has been improved with [ some ] the
guide peg.
View detail
The best for repair of the broadly torn sheet, since a Size is large
The best for repair of the broadly torn sheet, since a Size is large View detail
The deep pool portion of the Motorcycle seat avoided a few by degradation, and since it was a grade which is wasteful for exchanging the whole round head, it repaired with this sheet. If it is easy since it only cuts and sticks only for a necessary quant
The deep pool portion of the Motorcycle seat avoided a few by degradation, and since it was a grade which is wasteful for exchanging the whole round head, it repaired with this sheet.
If it is easy since it only cuts and sticks only for a necessary quantity [
], but it sees nearby, it is conspicuous for a while too.
I think that they are convenient goods if some things are the Types about which it does not care although a Recommendation is not carried out to the more nervous one.
View detail
Since the hole opened on the square of the Tandem seat, it repaired with this product. It cuts with scissors in the Size which can cover the hole, and only removes and sticks a release coated paper. Because the place to stick was degreased
Since the hole opened on the square of the Tandem seat, it repaired with this product.
It cuts with scissors in the Size which can cover the
hole, and only removes and sticks a release coated paper.
Because the place to stick was degreased carefully (it is wiping at a Parts cleaner), there is no sign of separating although stretched on the square.
If it is a big crack, re-covering is considered, but I think that this Seal is enough as a small tear.
View detail