Reviews
Fits: KAWASAKI KSR-1, KAWASAKI KSR-2
Securely sewn even for small motorcycles
[How is it used?
I got a used spare Seat for a KSR-II that I have owned for many years, but I was looking for a replacement fabric because the Seat Cover had cracks, probably due to poor storage conditions.
I was unable to find Seat fabric in the same color scheme as the last model, so I searched Webike and found it for sale at GRONDEMENT, so I purchased it.
How did you like it?
It is probably a higher quality fabric than OEM Product.
Color as a seat:Gray outer skin part is Dimple processed and gripped firmlyQuantity:Seat fabric is very easy to stretch, not a flimsy article of 1pc. fabric, but firmly Draping in front and back.
The price at the time of purchase was 6,820 yen, which was relatively expensive compared to NTB's Seat for SEROW250. Convincing Prices or perhaps I should say This is a low price for this quality." The product was so good that we could feel that it was a good product.
The fabric is thicker yet softer and may be more durable than the OEM Seat Cover.
How did it compare to other products?
To be honest, the only other product on the lineup other than GRONDEMENT's was a black fabric surface, and at this point, GRONDEMENT was the only choice for me.
[Points to note]
Since this product is three-dimensionally sewn for KSR, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, which is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
The shape is three-dimensionally sewn for KSR and the color scheme Pattern is the same as the final KSR-II model.
The price is never too high. High The price is exquisite, which cannot be said to be the case.
[How is it used?
The city driving is Main, but it has almost become Display these days as it is getting old and is stored in a Large cutout.
I would like to own it as long as possible.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Please continue Lineup as long as GRONDEMENT continues.
View detail
What is JAPAN Kek,.
Too big. It's too loose and loose and not at all comfortable. There is a fold over at the bottom so there is too much left over that you can't pull it all the way out. This is unusable. View detail
original
I bought it because I remember the combination of black body and red seat of CBR400F and NS250F in 1980's. It has changed to an impactful and novel image. I am satisfied with it. View detail
10 days to arrive
Purchased as a protective cover for a new seat.
Was the one you received as per Image?
It was of higher quality than I had imagined.
[How did you feel about the Fit?
Is it made in Limit or might it need a hang to cover it?
Thanks to that, Seat closes Smoothly.
Please judge the extra skin from the picture.
How was your experience with it?
No different than OEMSeat.
[Was there anything that disappointed you?
I thought it would be a cheap Cover made of thin Sponge and covered with synthetic leather that would make it hard to close the Seat. I thought it would be difficult to close the Seat, so I was disappointed in a good way.
How did it compare to other products?
I like the fact that it's only a synthetic leather Seat.
The others had thin sponges or something in them, which changed the seating comfort a lot, and
I had some difficulty closing Seat with Oversized.
The deciding factor in the purchase
It was a domestic product.
【Included Parts:presence or absence】.
None
[Notes]
I had 10 days to get it in my hands.
Are Minor car models made-to-order?
[Opinions and requests to Manufacturer
Thank you for handling such an old model as AF24TACT!
Very good product!
Durability is tested here w
View detail
Color change
The surface of the off-road vehicle was easily wrinkled at the curve that rises from the buttocks to the top of the tank, and I managed to stretch it in front of the warm air heater while sweating and mobilizing both hands and feet.
There is some Wrinkle, but it is good.
View detail
One-off sensation, color it to your liking!
I reupholstered the Seat of the last model FI LITTLE CUB.
The Rubber Type is easy to work with and requires no tools, but if you want to make your own chain
I want to reupholster it well, so I chose this one.
Because LITTLE CUB of our house is all penned to Yellow color & Black, it is in the meaning of Coordinates.
Yellow Color Piping & Color:I decided to go with Emboss in Gray.
I was prepared for the delivery time as it was a special made-to-order item, but it arrived in about two weeks.
The instruction manual is written in the package and there is also a video guide.
The guidance was very detailed and reassuring.
1. Remove the Seat from the car body (NutQuantity of 10mm):2pc. (Set)
2. Remove the conventional Kaw (with Slotted screwdriver and Pliers)
3．The fixing of the reupholstering Seat is back and forth→Quantity:Pair (for Left and Right) and stop it with Tucker while pulling on the diagonal.
(You can also use HandTucker, but I used Air Tucker, 10mm wide and 6mm long.
The difficulty of reupholstering Seat in CUB is low.
It's hard to make a mistake the first time if you make a firm decision not to rush into a Wrinkle.
Also, when you remove the leather from the Normal seat, there is a Vinyl sheet sandwiched between the surface of the Sponge
Do not throw this away, use it as is. If the Vinyl is deteriorated or torn, you can use the Vinyl bag as
It would be better to cut or otherwise tuck it in.
Having Vinyl underneath will prevent rainwater from seeping into the Sponge through the seams when it gets wet, or seeping out through the seams when you sit on it.
The work took about 20 minutes to complete.
About color
I thought that BlackEmboss is not white, and I dared to use full EmbossColor!:I went with the Gray color, which I kind of regret.
The actual product is brighter than the Image in the product photo, so it looks a bit dirty.
I should have made a safe Black & Yellow color Piping...
There are some cheap SeatAssy available in Asia, but the Urethane foam is hard.
If you are OK with the STD Shape, you may want to reupholster it because the seating comfort will be different from the OEM.
View detail
It's a strange installation, but you can't go wrong
Seats can get dirty without you even knowing it, or they can be torn up by mischief.
If that's the case, enjoy the New Seat feeling with this product!
The good thing is that you can customize your product from the web.
It's hard to get a finished Image without a photo!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
The seat was torn, so as an emergency measure
The OEM Seat had been torn to pieces by years of deterioration, and we were looking to reupholster it I found this product
The procedure was easier than reupholstering because I just put it on top of the already existing Seat
You will need to hang on to the seat to install it, but if you remove the Seat from the motorcycle body, you will need to remove the seat from the motorcycle body It's not too much trouble if you put it on
The texture of the cover is not worth the price, there is no luxury feeling, but I am not looking for it in the CUB in the first place I'm happy with it
We'll see how it progresses in terms of durability, but the details are pretty solid from what I've put on it There is no atmosphere of easy tearing
View detail
Installation is Large funny
The size is perfect so I think that installation is quite difficult unless you grab hang.
That finished product is a good product without Wrinkle.
View detail
Purchase for re-exchange from OEMSeat
OEM's VTR 250's Seat is hard and painful, so Urethaneetc. I adjusted it and it deteriorated while buying it. Although I thought that it is hard to work because impression that I purchased it did not have a mold, unexpectedly the fabric was softened many times and adjusted and it gradually became familiar with the warmth of my hands. Put it down overnight and put a light squeeze again and testRAN done. Once I got on Touring to GW and confirmed Fitting again a little deflection came out so we planned to finish the adjustment at the point where the growth stabilized for a while. Hang of the tightening method temporarily fixes the front side of Seat only at both ends, semi-fixes the Tandem side of Seat, temporarily fixes the SIDE part to trace shape, and makes the whole circumference Quantity : Pair (for Left and Right) Hitoshi etc. While tightening while stretching, during this time Tucker fixed and unfastened repeatedly readjusted. I think that it is important to judge that the elongation of the dough will stabilize after a long time. Finally, the usability is normal fabric and EmbossSpec. I was worried about which to do, but Emboss has a moderate Grip feel and feels good. This maker purchased ordinary fabric for CUB, but the fabric was still thick and slippery. I think it is a correct answer for Emboss. It is only after durability. View detail
If Seat breaks this!
Stitch broke with aged deterioration, purchase this product.
Seat replacement seemed high, but this was cheaply repairable.
The texture does not have any problem, so despairing is Large strange because it is Pitching, but if you put it on, it is Exactly.
View detail
Fits: HONDA little cub, HONDA little cub
Purchased for Seat Replacement of MD50 Reform 75
I was doing a Cover Type on Seat of OEM, but wear of SIDE section occurred, so I bought a Cover of Cover Type this time. Purchased for LITTLE CUB in MD50. Size can be installed without problems. Cover 's fabric is equivalent to OEM and quality is likely to be good internally. Concerning durability in the future. However, Seat of MD is a type that claws cling to the base plate of iron plate and catches the fabric there and squeezes it up. Since there is no durability of the nail, there is a possibility that the nail may break due to rust of the base plate unless it is set to Cover Type next time. Regular Motor
If it is a Type Seat that can be replaced with Tucker, it is recommended as a regular replacement part.
View detail
Fits: HONDA Grom(MSX125), HONDA Grom(MSX125)
I stuck in the anko bulk but it fitted properly.
【What made you decide the purchase?】
The NORMAL epidermis became hard, and it turned out to be double stitch, because it plays an anko so it looked emphatically.
【How was it actually used?】
Emboss was easy to grow and Sverane was not easy to stretch, but even an amateur could handle it somehow.
Sitting comfort is very good.
Anco is also used for Motorcycle Seat Material "BodyDoctor" I forced a rough pillow. Grom Seat of torture became a high-class Sofa and it looks better and it is highly self-satisfied.
【Was it difficult to install? (Hard parts case)】
HandTucker sometimes loses its foundation and the core does not get stuck. I think that if you have Air Tucker you can change it comfortably.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As I noted above, HandTucker uses a lot of grip strength. Should be challenged with the preparedness to redo many times without sticking.
If you do not want, I recommend using Air Tucker or Electric Tucker.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
At first we arrived in the case of the cylinder and I was worried about the crease. Because I put up for the bread in the anko bulk, I did not care about the folds.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Because the price was 4000 yen due to mistake in PC setting, we called and confirmed Manufacturer w
When I did this price I was even more satisfied with w
【Have you compared items?】
None
[Others]
Grom 's pain was also good and I got a good Seat.
View detail
Fits: HONDA CRM250 R type 1, HONDA CRM250 R type 2
Mistakes in quality
There is Tucker as necessary for reconnection, but unexpectedly it is enough for Daiso's
It ended with the result.
I think that there was no mention, but as Tandem belt was also attached
It was good.
Size feeling was made quite Exactly, so it was a pain to stretch wrinkles
There is thickness, let's put the spirit in because it is also comfortable to touch if you can stretch it cleanly
View detail
It is exclusive for HF 05 and its appearance is finish like refreshing.
At the time of installation, I took a bit of trouble at first, but once I knew the point, it was mounted with Just fit. Work finished in a short time and I am satisfied with Large. View detail
Fits: SUZUKI Address V50 (2-stroke), SUZUKI Address V50 (2-stroke)
I can not say it's the best but it's a good feeling ...
The acquaintance's ADDRESS V 50 Seat cover
I changed it..
The Seat cover of GRONDEMENT is a domestic product but the price is affordable so I immediately decided to purchase it (^^) /
I used HandTucker and Cutter Knife for reloading.
The finish is pretty good and I am satisfied with the completion after the replacement (^u^)
View detail
It is the second purchase ♪
In the Seat replacement of the last time I used ALBA's BluePiping recliner Seat cover, but Piping's synthetic leather faded away without a year.
In the last time I chose BluePiping of GRONDEMENT.
Piping felt a little cheesy with Vinyl, but it lasted over a year and a half.
I wonder whether Piping's fading will be limited to some extent by any material.
Then, along with that, please select the Seat cover of GRONDEMENT again!
A little expensive, but EmbossSpec. I made it to
It is the third time for rewinding, and it ends 30 minutes or less ♪
EmbossSpec. It feels good to have Custom feeling ♪
View detail
We have solid details
Three months have passed since it took effect, but there is no problem in quality at all.
When I looked at the product after it arrived, I was thinking that the detail was tailored well and quality is high. I felt that the dimensions are perfectly matched and also durable.
The attached Instruction Manual is also very satisfied with kind contents. I think that I'm glad I bought it although it costs a little bit.
View detail
Tight
It's tight, so if you can slowly cover it while stretching it entirely, it's Exactly. There seems to be some wrinkles, but it seems to get familiar with time. My fingers hurt while working. Once you bend it, it will not move so it's redone. View detail