Reviews
Since M5.
I bought it because my homemade Fender Eliminator cracked when it was brittle.
I chose this one because Screw was M5.
It is a very normal reflector with no particular problems.
View detail
CALI Seal
When CALI seals are affixed to the License Plate, the adhesive residue can be a problem when replacing the seal. In the first place, due to the excessive number of registered vehicles in some municipalities, the number of letters on the plate may be too many, and the plate may be covered with the letters, making it difficult to affix the seal neatly.
The product in question is just a Plate that provides a dedicated place to affix a CALSeal next to the License Plate.
It is a simple Level product that some people can cut out of steel or acrylic plate and make themselves.
However, when I picked up the product, I found it to have a nice texture, and considering the time and effort required to make it myself, I think it is an easy and cost-effective product.
However, I am a little afraid that I might scratch the Dustclothetc. when wiping it off when washing the car.
View detail
Functional Parts for a Bland Bolt
[How is it used?
For fixing Bolt of License Plate of SEROW250 which is used for mountain play.
Just by replacing the inorganic fixing Bolt with this product, it will look better, and it can also be used as a Net fixing Hook for when you have a lot of baggage. Two for the price of one. PARTS.
Was the one you received as per Image?
I saw a friend's Motorcycle that had already installed this product when I didn't know it existed yet. What is this aluminum color that looks like a very small version of the Tezuga?" When I asked him about it, he told me that it was a product installed for the above-mentioned purpose, so I immediately took a crack at Ideas.
The product was as per Image because of such a process of purchase.
Was the installation difficult?
The difficulty level is low because all you have to do is remove the bolt that was attached to the License Plate and install this product, and I think that anyone can easily customize this part.
How was your experience with it?
Most of them are free dress-up parts, but they are used for fixing the Hook of Net for Motorcycle when we carry a lot of luggage with Motorcycle, which happens a few times a year or not.
It is seldom used for functional purposes, but it is useful when it is.
Well, it's a bit of a duplication. Color Anodized Aluminum Collar Dress-upSmall things.
[Included Parts:were they on?
As you can see in the picture, each color Aluminum Collar, Cap bolt (length is about 20mm?), Nut, Nylon washer×2 and 1 piece of Iron Washer are included. and Nut and Nylon washer×2 and 1 piece of iron washer is 1Quantity:Set, and itsQuantity:Two Sets are included in the package.
[Was there anything that disappointed you?
My friend who used it before me bought the Red one, but after about a year or so the Anodized staining faded and it became just Silver, so he painted it Red with plasticolor and dyed the hollow side line White (it was exactly the Image of Zunga).
Anodized light colors may fade quickly.
Other items that would be helpful
Point and hang of installation
Even though the collar is sandwiched, it is basically a fixed Bolt. "Tighten with the proper Torque." I don't think there is a problem as long as the
"Loose and falling off." If you are concerned about the "Mere Old Man", it may be a good idea to replace the existing nut with a Lock nut.
[Availability and clarity of the Instruction Manual
No Instruction Manual, as noted above. Bolt & Nut+α for fixing So no problem.
It can be used not only for fixing License Plate, but also for fixing M6Size, so it can be used in various ways depending on each individual's Ideas.
[Notes]
Not particularly
[ITEMS TO BUY TOGETHER
Basically, no.
Bolt & Nut, Aluminum Collar, and Washer in Quantity:The set is complete, so if the purpose is to fix the License Plate, this product is all you need.
[Opinions and requests to Manufacturer
2Quantity:Considering that the Set costs about 910 yen, I would like to request a more UV-resistant dye.
View detail
Slight appearance change
I was looking for a Case to put my CALI certificate in and happened to come across it in a search and it was cheap, so I bought it.
I didn't like the position of the Sticker on the local number, so I'm glad I chose this one.
It is a product that is only for appearance, but I think this kind of product is also interesting and White.
View detail
Fine material seat covers
Honda Zoomer seat (ruckus nps50) reupholstered and it looks sleek. Waterproof. Too bad they are not available from Honda, but they are certainly a good way to upgrade your saddle if it is broken. -------------------------------------------------- -------- Chair of Honda Zoomer (Ruckus NPS50) again dressed and it looks tight. Waterproof. Too bad they are not available from Honda but certainly a good way to upgrade your saddle when it is broken. Powered by Google Translator View detail
Simple and Stylish
It is simple as a bracket and the reflector is thin, so I am satisfied with the reflected look.
It is not cheaply made and is solid.
View detail
License Plate Light Measures
Wiring is quite thin, so Quantity of Wiring to Gibbon terminals.:I plugged and crimped 2pcs. The brightness is just right for illuminating the License Plate. I think the durability is the only thing left to be considered. View detail
License Plate Light
I bought this product because I needed a License Plate Light for a small custom job, and I think it is easy to install, but I think it is easy to break if you bump it a little bit. View detail
Ruckus luggage rack
The bike luggage rack was just as specified. Good quality materials and fitted perfectly. The ordering process was straight forward and the delivery time was quick and reliable. I would definitely recommend using webike and will be ordering from them again in the future. View detail
Mounting holes are perfect.
Fender Eliminator was converted to Fender Eliminator and a Reflector was added.
It is cheaper than other companies' products and the reflector itself reflects well.
I was worried about the mounting holes because of the low price, but the Number was installed without any problems.
View detail
For a little Accent
I bought it because it was reasonably priced and looked interesting. I had a hard time deciding which color to buy, but I chose Blue. There are different types of cutting other than the color, so please be careful when you buy one.
There are no special precautions, but be sure to remove oil on the body side with Parts cleaner.
View detail
Used with Fender Eliminated KSR80
I bought this product because the KSR80 I bought used was Fender Eliminator, but it did not have Reflector.
You can install it between the License Plate and the Bracket without any problem even if you are a beginner.
The price is right for Universal and the quality is a bargain.
View detail
I like the shape.
If the license bolt is attached as it is, there is a high probability that it will be an eyesore to the following vehicle.
I was looking for something with the LEDs as deep as possible and this is what I found.
Compared with the one that only the slit is in for the conventional LED, the mouth is also opened like large, and the light emitting part is also in the back, and it seems to be good for the measures against blinding...
But there is no WaterproofSeal at all on the LED part.
The seal is just a transparent silicon, so you can just remove it and seal it with Epoxy resin.
View detail
ZOOMERCustom
I'm glad it's not easy to find. View detail
Just enough to give it a try.
I installed it on my Yamaha Max star125.
It is written as for ZOOMER, but you only need to process it with wiring, so you can put it on any car model.
It's quite bright.
I'm not sure how durable it will be, but it feels like it's installed
It's nice and compact.
I'm wondering if it's durable.
View detail
Stylish.
A part of Seat was torn and the Sponge was torn after 5 years of neglect, but this Cover makes it back to life. Just put it on the cover and you can enjoy the fashion with the color of Piping and the color of car body.
However, you can't cover it with Exactly as much as the product photo, so the Bellows is a little bit visible and it looks like an afterthought.
View detail
If you can process it yourself, that's good.
Quantity:I'm thankful that I was able to buy it for less than $1,000 for 1 Set of 2pcs. but it's only cheap. The sea-ring is not done properly and I did the sea-ring by myself using the Glue gun. Although the important LED is bright, it sometimes flickers by Idling, probably because of the relation of the voltage of Battery. It seems to be possible to make it to the position light etc. according to Ideas. View detail
Rin Parts Front Fender
First time order from this brand, the product is in good finish but still a little touch up to make it mirror finish or in my case i make it carbon fiber look with sticker. The price is reasonable. For installation if the fender can make a little bit larger on both side and make a hole in order to tight it with zip i think will be more secure. I definitely will recommend to others. View detail
It's for ZOOMER
I found in the Package that it is for ZOOMER, so it should be able to be attached to ZOOMER
It's hard to tell the difference between Brake and Position
I couldn't pimp a motorcycle that I wanted to put on, so I left it there as a hassle It is
View detail
Hook
It's a decorative Bolt, but it's also an excellent Loading Hook
It may be possible to install it in a different location depending on the car model
Practicality is enough But you need to be careful not to interfere with the recognition of the License Plate
Packaging Condition
Resin Washer◎
A few line grooves have been machined, but the Gap is …
(Program error on the Z axis?)
View detail