Reviews
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
W-1741-058
I really liked how these nuts transformed my Honda Monkey and I decided to repeat this with my Honda Little Cub. The nuts fit perfectly except for two washers (the stem on the Honda Little Cub turned out to be wider behind the thread), I had to leave two washers old on the inside. I liked this purchase, I was satisfied with the experiment. As always, the products of this company are on top!!! View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Product # W-1741-058
To give a beautiful look to the motorcycle, I bought a set of bolts and washers made of stainless steel. Installation takes 5 minutes. Very good design overall. I was pleasantly surprised by the functional elaboration - this is the largest set of 12 parts at the lowest price. I recommend everyone to update their appearance. To give the motorcycle a beautiful look, I bought a set of stainless steel bolts and washers. Installation takes 5 minutes. Very good design overall. I was pleasantly surprised by the functional detail - this is the largest set of 12 pieces at the lowest price. I recommend everyone to update their appearance. View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Product # W-1741-058
This kit was purchased for the Honda Monkey. The original nuts were coated with oxide, the washers were slightly deformed. A solution to this problem was required. There have never been any questions about the quality of the cube parts, why when we saw this kit, we ordered it without hesitation. I really liked that the nuts on the outside turned out to be larger than the original ones, which had a positive effect not only on the appearance, but also would not have a deforming effect on the washers. The result exceeded all expectations! View detail
Fits: HONDA DAX [Dax]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA CHALY [Shally].
Fits Chaly, Dax and Monkey
Have ordered 3 of these sets now and are always a great fit and finish to any honda with the same threaded shock towers. will be ordering more in the future View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Set of stainless steel bolts and washers
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: W-1741-057.
I bought a set of stainless steel bolts and washers to update the old ones, which are no longer so beautiful. Everything came up normally. This is the largest set of 12 parts and the lowest price. I recommend to everyone - it's cheap to update the look. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details: W-1741-057. I acquired a set of bolts and puck of stainless steel to update the old ones no longer so beautiful. Everything came up regularly. This is the largest set of 12 details and the lowest price. I recommend everyone - cheaply update the appearance. Powered by Google Translator"
View detail
Fits: HONDA DAX [Dax]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA CHALY [Shally].
Rust prevention
I like the look of Stainless Steel so I went with this one. View detail
Fits: HONDA CUB90 [Cub]., HONDA CUB [Cub]., HONDA CUB70 [Cub]., HONDA CUB90 [Cub]., HONDA CUB [Cub]., HONDA CUB70 [Cub].
Retro and practicality.
I decided to go with a basket instead of a carrier because I thought a rustic, cute look wouldn't be so bad.
This basket is made by CUBY, a CUB specialty store.
It's a wicker basket and it's very well made. I think it's not water resistant, but it's something that can take both looks and practicality.
good point
It will definitely look good on a LITTLE CUB, but it will also look good on a regular CUB.
Aside from being water resistant, the baskets are very durable.
You need a bracket to attach the front carrier. In my case, the bracket was originally attached to the DELUXE model.
A bad point
Water-resistant.
This product is made by a shop that knows all about CUB, so you can be sure that it will be a good fit.
By all means.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 70, HONDA SUPER CUB 50
Useful in Touring.
It is useful when Rear Carrier alone does not cure the problem.
It also has a dress-up effect
good point
Instruction Manual is easy to understand.
Fit without feeling like an afterthought.
Tent can be loaded at all.
Parts rigidity is also high.
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Resistant to rust
I used to use the Plating type, but it rusted and I bought this product! View detail
Increased loading capacity when camping touring!
Since I replaced my CUB110 with a JA44, I also re-purchased this Cuby Front carrier.
I bought the Repeat because I had used it for my previous JA07 and was satisfied with its shape and loading performance.
It is just the right size for loading Schlafsacks and Tents for camping tours and has a hook for stable loading.
When you don't have any luggage on board, the weight may increase a little, but it is not so much that the handling is worse. As expected of the CUB specialist, Cuby has thought this point out very well.
But I use it on my daily commute to work and it rusts in the rain.
This is an inevitable part of the Material, but it's a hassle to maintain, so I'm leaving it as it is.
Anyway, my belief that the best choice for CUBs is Cuby's products is unquestionable.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 70, HONDA SUPER CUB 50
For CUB's CampingTwoCustom
It has a Loader Hook, and you can pack it with a loading net and rubber ties.
It is more convenient than the Basket because you can load more freely.
Be careful not to overload the Handlebar as it will make the Handlebar operation heavier and may pop out when you turn off the Handlebar.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Cap Nut & Washer for Honda Super Cub
I purchased this set of stainless steel bolts and washers to replace old original parts that were corroded and badly worn, the quality of these parts turned out to be very good, the stainless steel is thick enough to withstand the required forces. The installation of these parts took about 10 minutes. With these details, my Super Cub looks even better! Many thanks to Webike for the fast delivery and great packaging! I purchased this set of stainless steel bolts and washers instead of old original parts that were corroded and worn out. The quality of these parts turned out to be very good, stainless steel of sufficient thickness to withstand the required effort. Installation of these parts took about 10 minutes. With these details, my Super Cub looks even better! Many thanks to Webike for fast delivery and excellent packaging! (Translated by Google Translator) View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Is good
I was looking for something that will not rust as it will run on the mountain with CUB and become muddy.
It was not possible to attach it to the clipping point on hand, the Up type muffler of the water circle RACING.
The water head Racing Up Exhaust System may be used if there is an ultra thin socket?
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Used with GORILLA
OEM's Bolt got rusted, so I bought it as a Stainless Steel if you exchange it anyway.
It becomes OEM's 14 to 17 mm, torque is easy to put on, it looks better.
Size is not sold to Home center.
View detail
Fits: HONDA DAX [Dax]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA CHALY [Shally].
It might be surprisingly surprising
CHALY 's Rear shock installation Nut was rusted, so I thought that it looks better even a little. Plating not Material : Stainless Steel is strong against rust, ◎, usually (14) I'm Large (17) There is also a sense of security. View detail