Reviews
Dress-up casually!
Since it is a BreedCap, it is not very conspicuous, but it is like a casual dress-up. View detail
Not much change.
Maybe it's not necessary at this price? View detail
cool and solid
I installed Kohken bleeder bolt on Brembo 19 MCS brake master cylinder, it fit very well and solid. I've chosen titanium coast treatment, it look very cool. View detail
Bleeder Bolt for Nisshin Caliper MASTER
The OEMBleeder Bolt had deteriorated, so we replaced it with this Bleeder Bolt made of Stainless Steel.
Material:It is Stainless Steel, so the weight is the same as OEM, but I am very satisfied with the detailing, rust resistance, and black color.
I had also purchased a ZETA Titaniumium breeder bolt before buying this product, but later realized the existence of this product and repurchased it.
Material in terms of price:It is the same as Titanium, but I was attracted to the fact that it is black, the same color as Caliper, so I had to use a Titaniumium breeder bolt.
View detail
Replacement of Bleeder Bolt on brembo Master Cylinder
Before the CORSA CORSA Corta OEM Brembo Master Cylinder bolt rusts away, this Material:I replaced it with a Stainless SteelBleeder Bolt.
Common Material:I was looking for something as quiet as possible, because Titanium and other materials would be Gold shiny, and I found this BlackXCoat, and the price was very reasonable.:I was hesitant to buy it because it was not much different from Titanium, but I had some points saved up.
Compared to the OEMBleeder Bolt, the finish of the Screw section and seat surface is very carefully done and the quality is very high.
However, this product is Material:Stainless Steel, priced at Material:It is about the same as the Titanium one, so I guess it comes down to weight or Black Finishing.
That said, the difference in weight is only 2 to 3 g, so it may be better to select a product based on appearance according to one's own preferences.
Black on Titanium may require special processing? Black on Titanium may require special processing.
View detail
PetitCustom
Bleeder Cap is usually used for Material:The rubber cover is available in anodized color, and the aluminum cover provides an enhanced texture.
We chose the color Black because we prefer the OEM look.
View detail
Stopped!
I have been suffering from oil seepage from the bleeder bolt (bremboOEM) on my bremboRCSMASTER for 6 years and replaced it with a new OEM bleeder bolt. It has been a week since I installed this product and the leakage has completely stopped! 。 If you are suffering from oil seepage, it is worth a try. Tightening torque should be less than 20Nm. View detail
The duct part of the cowl of the motorcycle is applied to the back of the cowl with a hot bond or Rivet.
By applying it to the back of the duct part of the motorcycle cowl and fixing it with a hot bond or a Rivet, it will look like a race ish and is available in a variety of colors. View detail
To protect the Radiator.
It is not uncommon to find Radiator's Protective Mesh specifically for each car model from each company, but they are expensive.
A single mesh panel of stainless steel or aluminum will cost you a fortune.
This is also Wallet-friendly and comes in a variety of colors, so it's a fashionable option.
Use a masking tapeetc. to separate the Radiator size.
Cut with Scissors and it is ready to use.
Of course, the Radiator is also perfectly protected for practical use.
I replaced it for a new one at ImeChain after using it for about 5 years this time and there were no dents in the fins.
The CB has a Plastic protective cover over the entire surface of the Radiator, so I made a sandwich between the Radiator and the protective cover.
If the car model is not equipped with such a device, it can be stopped by Tie Wrap or something.
View detail
AGUSTA
I was expecting a slightly darker Blue color in the Image, so I am disappointed in that. View detail
AGUSTA
It was easy to cut and easy to install. View detail
Mesh re-covering
When the A-techSeat Cowl is installed, the mesh around the brake is reupholstered and tightened. View detail
Small personality, durability is …
I found it to be a very good product for One Point Fashion for my feet.
The work itself only requires replacing the Breeder's Cap, so even beginners can do it quickly and easily.
The texture of Anodized was good and I thought it was indeed a Kohken product.
But it's not very durable;
After six months, the Rubber cracked, and after about seven months, only the Aluminum Cap was missing.
It may be inevitable for the structure to fly away, but the caliper generates heat, and I would like to see the use of heat-resistant and durable rubber.
We wanted to take a look at the NORMAL Rubber cap, so we gave it a slightly lower score.
View detail
Good Quality & Packaging
The item was fitted nicely in the bleeder. Good quality of the product and was packed properly. The color was very nice with the brand name on it. View detail
Good Quality & Packaging
The item is fit in my radial brake. Good quality and was packed properly. I like the engrave brand letter on the bolt. The item is durable. View detail
If you can see Logo as One point, you can.
I wanted One point around Breather, so I bought this one.
It is the logo of Koken in the small parts, but the logo insists unexpectedly.
I thought that the white letters on the blue background made it look like one point. I felt that it was a good idea, but I think it's a matter of taste.
In addition, I attached 3 calipers in total with Front caliper (Single), Rear caliper and Front master, but 2 Quantity:It's a Set, so in this case you'll have one left over, so you'll have to settle for a spare.
The construction is well made, but the cap part is normal rubber, so the durability is the same as the normal one.
Well, it's not a part that deteriorates so much, so it's Recommendation for those who want one point of color.
View detail
To dress-up the Handlebar area
Since I changed the front brakes master of MONKEY125 to brembo, I decided to install the Reserver. [Color] I combined this one with the one I made for Smoke.
In terms of weight, it is heavier than the OEM plastic because it belongs to Gold even though it is Aluminum.
The AnodizedSpec. does not have any logo, so the Handlebar area is tighter.
There is no problem at all about the processing accuracy, etc. because it is a reliable Koken brand.
The only problem is that the price is a bit high.
View detail
Fits: KAWASAKI 250TR
It's called Exclusive Design…
I bought it because my Motorcycle has almost Zero load capacity.
Koken's coloring is very beautiful.
In other people's Impressions. RALLY 591. However, the one I received didn't have a sticker on it and it didn't come with one. I don't mind because I don't particularly need it, but I think it's better to inquire if you feel you need it.
The quality of the Carrier itself is a bit questionable.
Parts are welded in a distorted manner.
OEM Parts (Tool Box) to interfere with
It says that the position gap is due to individual differences, but the gap is so large that it is uneasy.
To solve the above, I installed it with a little modification and additional purchase of Spacer and others.
I was worried because this is not a normal installation method, but I am quite satisfied with the look and practicality after installation.
View detail
Match the color of Caliper
Since I replaced it with brembo black, I replaced it with this one for color matching and rust prevention.
The quality is not a problem at all because it is a Koken Brand, and I felt that the Wrench to be used is even better because it becomes 10mm from 11mm.
The material is Stainless Steel, so be careful not to over-tighten.
View detail
Higher quality than brembo OEM
The motivation for the introduction was iron Bleeder Bolt corrosion on the NORMALRear caliper.
My regular shop noticed corrosion during vehicle inspection maintenance and replaced the OEM product, but there was no corrosion on the Front and it was untouched.
I have been using 40mm pitch brembo universal casting for the Front (I'm the second generation and I've been using it for 7 years, and the first generation Brembo caliper lasted 36,000km for 17 years). The purpose is to extend the life of the caliper.
The ability to convert from the rarely used brembo OEM 7/16Inch (11.12mm) size to the frequently used 10mm size is another motivation.
The texture and structure are both good, etc., so we'd like to expand to the rear caliper as well.
View detail