Reviews
Fits: YAMAHA SR500, YAMAHA SR400
First of all, I'm satisfied.
I regretted that I should have chosen this one over DAYTONA from the beginning, but the fact that it can be installed even with Y's Gear's Rear Carrier is highly appreciated!
I can't help but feel that prices are high due to the high cost of living, but … I hope you do your best with the prices, etc!
View detail
Fits: YAMAHA SR500, YAMAHA SR400
The most natural atmosphere among side bag supports for SR400
There are various side bag supports for SR400, but Shim's Craft's side bag support feels comfortable when I put it on.
The front side uses a Seat Fixing Bolt, so it will be wobbly if the Seat is removed. When installing the rear side, it is easier to remove the License Plate.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Design priority, not practical.
I love the Design and bought it with my new car purchase.
Small top case (25L) I had been using it for commuting and touring, but it broke after 5 months of purchase and 2200km of driving.
It is as slender as it looks. And since it is not made of steel, it is difficult to weld and repair…
If you're thinking of wearing the Case all the time, you might want to remove it from your options.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Required when rear suspension is changed.
I installed this product to replace the rear suspension with Other Brand Product.
I was looking for a design that was as NORMAL as possible, and this product was it.
InstallationInstruction ManualThe manual is well written and anyone can install it.
View detail
Good!
I like it. Dream50 Rear mud guard. This is the best what i bought parts of dream50 ac15 cb50v products. My dreams come true by honda dream50 View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Not bad, but not as good as OEM.
I really wanted to add a Rear Carrier, so I bought this one from OEM replica.
I had high hopes for Shims' product.
It is used for touring immediately.
good point
●This is not Attachment, but a practical Carrier.
Plating finish is also beautiful.
Easy to install.
A bad point
The structure is delicate. I tied it tightly, but it collapsed.
The price difference is only about $1,000 from OEM.
I then bought the OEM one and the Pipe thickness is as different. This one was thinner.
After all, there is a considerable difference from the OEM Product.
But I think this product is Slim, Stylish and suitable for people who want to load it and use it as Attachment.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Like SR.
I moved the Blinker to the Tail and lost the Reflector, so I relocated it. I bought a Nut that fits the size of the OEM Reflector at Home center and installed it because the diameter of the Nut did not fit. The bracket of the reflector is visible because it interferes with the mudguard, but I am very satisfied with the result. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Unique products that cannot be found anywhere else
The kind of product you'd have to be a big fan of to get your hands on
Even though it is called a carrier, it can only provide a very small space But if you have rain gear or CampingMatte, for example, you can strap it on
It is hard for the wrench to enter the large though it tightens at the base of the installation of the meter I'm at a loss as to how to tighten it up …
Also, it seems that a little time has passed since it was manufactured, and the surface of the Stainless Steel is a little cloudy But that's nothing if not polished
Overall, I'm glad I bought it
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Sorry to just being able to do, so so so.
Although it took time to deliver, the expectation degree was high, but as the finish was very good, the welding of the installation Nut could be taken with only two Tourings and the Bolt dropped down and Case hits Chain Trouble It is very disappointing that I have happened. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Loading Up
Commuting Spec. I bought it because I wanted to install a Top case.
I got lost with things of Y's Gear, but I chose this, expecting refreshing feeling.
It was easy to install with just about changing it as Grab Bar.
I think that there is a little hang to fix with Bolt while just finely adjusting straight with respect to the car body.
Since the back part is higher, it will be slanted if you do not process a minority of Base.
Although it looks thin, it is very satisfying because it makes it possible to build luggage with confidence by making it very sturdy.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
it's recommended.
I bought it because the Chain cover of NORMAL did not arrive at the exchange of Rear suspension.
It is more light design than NORMAL's Cover, Cut of the Suspension part also has no interference with Large KYB KGS 325.
The thickness of Stainless Steel is also sufficient, lightness like Aluminum can not be expected, but for vehicles with many vibrations like SR, there is a sense of security in the strength of this thickness.
I finished work in about 15 minutes without installing or removing Suspension.
With this build, this price ... Recommended.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W400, KAWASAKI W650, KAWASAKI W400, KAWASAKI W650
It became pretty Parenthesis better
OEM's Chain cover is Material : Design was not so good at Plastic, so I bought this product that was good at Net.
I exchanged Cover at the same time as Gold chain, but as Chain got better looking, it was a little expensive but I am satisfied.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Durable making
SR's Rear Carrier has this because it was only this. I put a box of Home center and went around Japan, but there was nothing wrong.
Installation was quite easy.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Sym'z CraftShims Craft Classical Fender
It looks pretty good looking compared to other products, so it will be unnecessary to hide when you attach a Side bag. I bought it to prevent Bag's involvement in Tire, but now I am removing Bag. Although it is inconvenient, I use Backpack. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Last year I ordered this chain guard for my 1978 SR500: I am on the east coast of America and it arrived sooner than expected and in perfect condition. It fit perfectly and it still looks good. Be aware that you will need a rubber grommet and steel spacer
Last year I ordered this chain guard for my 1978 SR500: I am on the east coast of America and it arrived sooner than expected and in perfect condition. It fit perfectly and it still looks good. Be aware that you will need a rubber grommet and steel spacer for the front mounting point (just like on the OEM guard). I would highly recommend this item. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I'm almost satisfied.
Very cool.
OEM's unnecessary has gone, and the appearance has become clearer.
Even an amateur 's myself could exchange easily.
Other people are also written, but Minus is the place to divert OEM's Rubber parts.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Lighter appearance
Because the original Chain case was rusty
Replace with this product.
As an advantage
○ It became light even from the appearance.
○ Rusted for Stainless Steel.
○ Also supports Suspension exchange.
As a disadvantage
○ The gap with Sprocket stand out (The picture is 520 - 44 T)
OEM's thick steel Cover is also nice, but it looks light
This item is also good.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
I like it ~
It was easy to install and I was satisfied with the appearance. It's cool even without Side Back. Because Seat fixed Bolt is used, it may be a little worrisome when desorbing Seat. View detail
Fits: YAMAHA SR500, YAMAHA SR400
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender will be firmly fixed to a Frame by a Stainless pipe as a result. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
At the time of a Touring, it purchased in order to carry out seat back fixation. Probably attachment will be easy. Can anyone do it? Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 o
At the time of a Touring, it purchased in order to carry out seat back fixation.
Probably
attachment will be easy. Can anyone do it?
Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 of Japan circumference of the load (it appeared in the sheet one third) of 10 kg or more as for which the maximum loading capacity of 3 kg exceeds.
View detail