Reviews
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
If you remove the Mount, you can put it on,
All Winglets were removed for Cowl repair.
However, when the repair was completed and the winglets were installed, the rubber mount could not be positioned. A friend of mine who bought the same thing told me
The positioning jig for installation was borrowed and copied.
This product, like Honda's SeatBack, is also made from a pattern.
I think there are things to install.
For reference, see the photo.
View detail
Well, that's okay.
When using the OEMBlinker, a dedicated Bracket is required, and the additional cost is..,
The Exclusive Bracket is also somewhat unstable in its mounting position.
Well, I guess it is worth the price.
View detail
Performance Expectations
The OEM wanted a longer Screen because it felt like the wind hitting the Helmet was swirling around my chest. [Color] Since it was clear and with color, and since we are thinking of installing a handlebar riser in the future, we decided to go with this product because it was slimmer than other manufacturers and there was word of mouth on a certain site that it is difficult to interfere with the handlebar when it is cut off. The length was +7cm compared to OEM, but it seemed to be measured at the largest length of each, and there was about +11cm at the center position where it was actually installed. Although I have not actually driven the car due to poor weather conditions, I can expect that the wind will have much less effect on the car. View detail
Good
I had a Puch Screen on a 2008 SB I used to own. I remember that I had a Large change difficulty installing it back then, but I guess the accuracy has improved, and it went on easily on the 2018 model this time.
I chose Dark smoke and am satisfied with the way it looks.
View detail
Rear suspension contamination can be reduced.
The rear suspension used to get mud splashed on it when driving in the rain, etc. After installing the Inner fender, the mud splashing has been reduced. However, the Inner fender has not been able to completely protect the rear suspension from mud splashes. Installation was easy with the help of the instruction manual, and I like the fitment as if it were a NORMAL part. View detail
Ideal for touring on forest roads!
[How is it used?
Ideal for touring on forest roads!
Was the one you received as per Image?
I was looking for something else, but I really liked it in my own way.
Was the installation difficult?
The installation method is also easy to understand and can be checked with a QR code.
How was your experience with it?
? Right now, it's a cold climate and installation is only a little while away!
[Included Parts:were they on?
?Included Parts:none.
[Was there anything that disappointed you?
The ?rubber is good, neither thin nor thick!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
? I think it would be easier to install if there was a thin base paste Seatetc. so that the mounting position could be easily seen.
No photos are available because it has not been installed yet.
View detail
Genuine Puig Racing Screen for GSX1300R 2006
Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this blue versionto match with their bike colour scheme. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days from being shipped. The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need during fitment and for the screen not to be buffetted too much by wind. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a blue screen with a gradiented smoked area at the bottom near the instrument cluster. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: HONDA REBEL500(CMX 500), HONDA REBEL250(CMX 250), HONDA Rebel300
Genuine Puig New Generation NK Sport Screen for Rebel 300
This was a purchase a customer asked me to source for them to add to their Rebel 300 which they wanted a different screen than the one they already had fitted. This one is more of a retro look and gived the bike a better stance on the road. The custoemr had already sourced the correct part number for their bik so I did not need to do any research. Great stuff. The cost of this screen was a bit better than I could source locally, besides I already had a few parts in my basket that needed placing. I got them all shipped with EMS and the delivery took like 5 days from initial shipping from Webike warehouse. I have to say again, Webike warehouse really know how to pack items correctly and with the amount of packing involved, there is no way this screen or any of the other parts were going to get to me other than in 100% perfect condition. Well done Webike warehouse. So, this screen also comes with all the accessories needed to fit to this model of bike. No need to have to find a kit to do this as it comes in the box. The screen itself is gorgeous dark smoke and the clarity of the screen is perfect. It was a breeze to fit as everything fitted precisely as it should. This bike now looks a million dollars. One very happy customer. Thanks a lot Webike. View detail
Looks like OEM.
To install, simply remove the two screws, put them on, and tighten the two screws again.
It's very simple
Design as if it were OEM.
I still feel that the design of Mt series is completed by adding Shield.
View detail
I think it's a must for Fender Eliminator.
Fender Eliminator and installed because I was concerned about water rolling up from the road surface.
I think the dirt on the back side of the License Plate is better after driving on wet road surfaces.
(I can't look at this quantitatively, it's a personal feeling.)
I feel that the sand, etc. that rolls up to the lower LINK of the Rear suspension in front of the Swing Arm has also become much better. (This is also my personal opinion)
When the OEMFender was not removed, it was difficult to clean, degrease, and drill the holes mentioned below, so I removed the OEMFender.
This is an area that is difficult to check, so be careful. (I will buy OEM Parts from webike again)
Also, when installing, it is necessary to drill holes in the OEMFender, so an electric drill is required, even if it is a cheap one.
The included Double-sided Tape was packed and applied, but since it is a Rivet stop from the above hole drilling, perhaps just a few light layers of tape would have been sufficient.
Also, at first, I was reluctant to drill holes in OEM products, but when I checked the price, it was surprisingly cheap at around 2,000 units, so I did the work without worrying about it (laugh).
For your information.
View detail
Perfect windscreen
I was trying to decide on a windscreen for a couple weeks. I chose this Puig and am so glad I did! Not too small, not too big. 40°F at 45mph, I was very comfortable. I could not be happier with the look, fit, functionality. No turbulence around helmet or rattle / vibrations. 10/10 View detail
Touring Essential Items
I thought I knew what Screen could do, but once I installed and experienced it, there was no going back.
Without the screen, the 100 km/h acceleration on the freeway was an ordeal of constant struggle against the wind pressure on my body,
When the Screen is installed, the wind pressure on the body is much lessened even when accelerating at 100 km/h, of course, or even when overtaking.
The effect is immensely Large, even though it looks like a small difference!
In my personal opinion, I chose Puig's Screen out of the many available because I liked it the best.
Installation can only be done once after the Screen has been loosened, but it uses only common tools and does not require high maintenance skills.
I think the price is a little high, but I think it is cost effective.
View detail
The top edge comes up to my eyes and bothers me a little.
I have been using Puch's Screen since the nc750x on all my cars and am comfortable with the quality. The wind tunnel tests have been done, so the effect is perfect. The wind is blowing over the helmet. The screen is also equipped with a hand guard, so the wind does not hit my hands. However, the upper edge of the screen is just above the eyes, which is annoying. It is hard to see at night even through light smoke. 173cm average body type should be prepared for this. View detail
Installed on MY2021 StreetTripleRS
After wearing this, the wind has less effect on my upper body below the helmet, and I feel less tired even when driving at high speeds.
It looks a little silly, but it's functionality is important, so it's a TradeOff.
The only drawback is that the mounting points are bolted together with other plastic parts and the quantities are the same as other plastic parts.:Pair (for Left and Right) Since each part is supported in one place, the resin parts move together with the Screen base when there are bumps in the road, such as uneven surfaces. "Clatter." The sound is heard when the unit is installed. We are planning to stop the sound soon because it is an unavoidable part of the structure, but over 20,000 yen....
View detail
Fits: HONDA CB500R, HONDA CB500F, HONDA CB400R, HONDA CB500X, HONDA CB400X
No problems
I bought this fender for 400X because it does not have a rear inner fender. Since I have installed it since new, I can't compare with the condition without it, but I think it prevents dirt around the rear suspension (although it doesn't prevent it completely).
The Chain section does not EXACTLY match the Chain line, and when pressed with the finger, it touches the Chain, but it has never interfered with the Chain by shaking while running (15,000km).
There is a flat area on the front side of the Tire that collects fine sand and gravel, but this is only due to the structure.
Installation can be done easily by yourself, and even a novice mechanic should have no problem, but do not forget to check the tightness periodically as it is around the driving parts (although I never had it loose).
View detail
Rear Fender is good to have
After riding on a wet road, the hem of my Pants got dirty, so I put on the Rear Fender. It was easy to install, but when I loosened the ParaLever Bolt (Torque T50), I was worried that I might lick the Torque due to the tightening mechanism (the feeling in my hand was like I was going to lick it). (The feel of the bolt in my hand was like I was going to lick it.)
The bracket is solid for its cantilevered design, but the gap between the bracket and the fender can cause interference and chattering noise, so we recommend using padding before installation to prevent chattering.
As a result, the dirt countermeasure is effective.
View detail
Fits: MOTOGUZZI V7 850 SPECIAL, MOTOGUZZI V7 STONE 850
Expect mud splash reduction!
Not satisfied with one, he purchased two and connected them together in an adventure.
Maintenance was said to be difficult, so it was painted and installed.
The effect is unknown as it has not been driven yet.
View detail
Genuine Puig Touring Screen Clear for XT1200Z SUPER TENERE 2016
They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Genuine Puig Dark Smoke Screen
A few customers have had these brand of screens. Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this dark smoke version. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape the entire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a dark smoke screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
I think it works.
Purchased for a Large Screen.
Highway not verified
I drove down the road at 60~70km and felt that the wind hitting my stomach was considerably reduced. I plan to test it by driving to see how effective it will be as it will get colder from now on.
Looks a lot different and satisfying.
View detail