Reviews
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
Looks rust-resistant
I have not installed it yet, but the OEM bolt of SR400 has rusted, so I purchased this product expecting the Titanium bolt. The OEM bolt is tightened by Hexagonal Wrench, but this product is Hexagon Bolt, so I am worried if I can manage the torque in such a small space.
I would like to post an IMPRESSION after installation.
View detail
Required Parts for Change Accent
These are the Parts required for the installation of the Change Accent, but we would like them to be included with the Body.
Change Accent, installed on sr400Final edition. I was not particularly dissatisfied without Assist, but after installation, "Snap" and Shift is entered, and it feels good. Especially, when waiting for a traffic light and putting in Neutral, Stress is also reduced.
View detail
Those who understand can understand Rapid.
Tank end a little. (about 8mm) The Level goes up and becomes the same as the Level under Seat, and is Refreshing.
Those who understand will understand.
In addition, for those who remove the tank, the tank has been raised slightly, making the removal work easier.
I recommend it because it is easy to install and inexpensive.
View detail
Accuracy.
The accuracy is excellent, but it is somewhat expensive for the color. View detail
Still a little expensive.
As you all say, a little expensive.
I'm in the mood to raise the price of Body.
It would be better to make this one cheaper.
It's a product of the year and whether you need it or not.
I know it can't be helped, but …
View detail
It is a simple part.
It's pretty good; if you frequently take the Seat on and off.
Even with Glasses, the OEM would still get scratches.
Just right. ButterflyScrew and KnobType too.
We sell, but not too explicitly.
You can take it off! I don't think so.
I think, but the Seat theft Risk will also go up.
I think this is about right.
In terms of discreetness, even if the Black color
I wonder if it is a good idea.
View detail
One point
Completely self-satisfied One pointParts
The quintessence and quality is good.
Boa Ace is a bit of a real thing.
It seems that sometimes Logo is not included.
This one is properly pictured.
View detail
Confirmation of MODEL required
Installation is easy. I have been working on it since I purchased it.
The tool compartment has been removed and the hollow Space
I'm installing it only because I didn't like it.
Bore Ace, for better or worse, as improved versions are developed.
(A little sad when an improved version comes out after installation…(lol)) )
There are two types:the old Type? and the improved Type.
for Carburetor？ (may need processing) The improved version is
It can be attached to FI Vehicles. Old Type is
It is not physically attached to the FI, so it is on the bore Ace itself.
I think it would be better to make sure.
Currently I am not sure which one will be delivered.
I was forced to put the old Type on at first.
View detail
It may be hard to tell the difference.
I purchased this product to level the Tank and Seat.
The difference seems to be that those who can understand it, and those who can't, can't understand it at all. He can tell, so he is self-satisfied.
It is a quintessential BOA -Ace beautiful product. Too bad it is not visible.
View detail
I've been removing Seat more and more often.
I have the Body of the Dora Recorder under the Seat, and I often replace and remove the microSDCard for Touring recorded images.
With the OEM Bolt, I had to pull out the Wrench every time, but with this, I can access under the Seat with a single pc of the small Hexagonal Wrench. It also saved me a lot of time.
It looks a little better, too, don't you think?
View detail
A mere Spacer is a Spacer.
[How is it used?
I had time to install the Boa Ace Spacer, which had been long overdue since it arrived.
Was the one you received as per Image?
Of course! I have purchased Boa Ace products many times in the past and I have confidence in them! This product also shows the beauty of polishing etc.
How was your experience with it?
There are no particular defects. I feel very self-satisfied because only the rider can understand this part, but…
[Points to note]
If I had to say something, I would say that Torque management is a Large cut, but we are hand Torque (appropriate), so what the … (laugh).
How did it compare to other products?
I'd like to think it's not like the extra Nut in the toolbox etc. or the proper Spacer (I hope).
Other items that would be helpful
I need a 20mm Wrench to remove the bolt on the Tandem Footpeg side and replace it.
View detail
Hidden Dress-up
It is an inconspicuous component, but it is a hidden dress-up. You can show it off to your friends. View detail
Finally...
When I installed Bore Ace's Rear Sets, a part of the FootBrake interfered with the Exhaust Guard.
It was described as if it was Large sturdy without it.
It will probably interfere with all Exhaust Guard!
View detail
Anti-Vibration Bracket
cool
It's good for preventing Number from cracking.
View detail
It's a little pricey.
I purchased this product for my Change Accent installation.
For FI Vehicles, you will need this, but I think it is a bit pricey.
Since the parts are not visible from the outside, I don't think it's necessary to be so concerned about the finish.
It seems to be the place where the strange obsession of the area seems to be the product of Boa Ace.
View detail
Frankly
I bought these because they interfere with the exhaust guard after replacing the bore AceRear Sets. The rear brake is very good. The quality was good as always. View detail
Used by FI Vehicles.
Used to install the Change Accent on FI Vehicles. To be honest, I thought the price was too high, since I also bought the Change AccentBody… View detail
The product is as described.
I wanted to lift the Tank just a little bit because the Fuel Tank and Oil Temperature Sensor interfere with each other, so this is just the right product.
It goes up about 10mm.
Installation is very easy.
The texture of the product is very good, but it is a pity that it is not visible once it is installed.
View detail
It's also cool to look at
It's easy to replace the Bolt in NORMAL! 。 It's a high-class Bolt.
It is not so noticeable when you see it installed.
Either I made a mistake when I ordered or Quantity:It was 1 Set of 2pcs. so it is Large sturdy with quantity 1 when you order.
View detail