Reviews
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
The thick Frame is useful!
Since it is a Small Shield, I wonder how effective the windshield is. However, in my opinion, the Level is better than no Level.
The advantage of the Large is that a Smartphone Holder, DriveRecorder, and Drink Holder can be attached to the thick and sturdy frame, making it possible to configure a cockpit on a motorcycle. Even with all of these things attached, there is no shaking at all.
It's really useful. 。 I'm glad I bought it 。 My Kok Pit is now complete.
View detail
Installation review
I bought it to change the rear luggage rack, and contrary to my worries, it fits well. However, you have to separate the air duct and pull it hard from the inside with pliers to make it fit all the way.
There is no difference from the other parts and the finish is clean. I dressed it up at a low price. -------------------------------------------------- -------- I bought it to change the rear luggage rack, and contrary to my worries, it fits well. However, you have to separate the air duct and pull it hard from the inside with pliers to make it fit all the way. There is no difference from the other parts and the finish is clean. I dressed it up at a low price. Powered by Google Translator
View detail
Cool
This is Cool, although I honestly don't know how effective it is.
Red is good.Color:Red is unexpectedly suitable for Gray Motorcycle.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
Windproof effect.
There are many videos on youtube etc. for installation, so you can install it while referring to them. As for the windproof effect, it has a windproof effect from half of my face to my chest area. The Demerit has a screen that creates turbulence, which causes the head to shake when the wind blows against the helmet. The height and angle of the screen must be adjusted as often as possible to avoid turbulence. It is not enough to just raise the screen, but it is better to adjust the image so that the turbulence hits the entire helmet and the wind pressure is dispersed throughout the helmet. It is not easy to adjust the helmet, but I like it because it reduces fatigue during long tours, and it also makes the helmet look more like a travel helmet. View detail
It's good.
The effect is... I honestly don't know.
Atmosphere. www.
View detail
Quantity:Pair (for Left and Right) You need to buy two to put it on.
I wondered whether I should attach a carrier, but I decided to start with a simple style and bought a ZETA Grab Bar.
Simply remove the OEM Bolt and install it between the supplied collars.
It is not likely to be used in Motorcycle Tandem, but it can be used for Net Hook when loaded with luggage, or as a Grip for raising and moving the car body.
The parts body is also finished with a smooth and pleasant feel and is easy to grip as a tandem grip.
It is easy to see from the description that I am a Quantity:Pair (for Left and Right) I thought it came in a box and when it arrived, there was only one in the box? I was so disappointed.
Grip to Quantity:Pair (for Left and Right) Two must be purchased for installation.
View detail
Headlight guard for CROSS CUB
Headlight guards for CROSS CUB are available from other manufacturers, but we purchased this one because it is the most stylish and does not interfere with the function of the Light.
The installation must be done in accordance with the Instruction Manual by loosening the bolt securing the headlight one side at a time, otherwise the angle of the headlight will change and it will be difficult to readjust the angle.
Attach the Acrylic plate to the GuardBody yourself, but be careful not to tighten it too tightly as it may break.
The other item in the photo is MORIWAKI HornGuard B TypeSilver 03810-20Z01-00
View detail
Fits: HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, KAWASAKI KX450F
Required equipment for YZ
CYCRA Disc Covers and Quantities:Used in Set.
YZ is required for Enduro because of the weakness of the thinness of the Front fork abyss
Fixation is done by biting into the hollow of the Fork, then occupying the Screw to fix the Quantity:Pair (for Left and Right) The method is to spread out the screw to the "smallest" possible size, but this screw is a tricky one and very small.
Licking is very difficult to remove.
When removing the Screw, even if it is a hassle, it is necessary to clean the area around the Screw and make sure that the Wrench can be inserted securely.
Size-wise, it is unavoidable, but this is the only point to note.
View detail
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
Well, it's only for appearance, but it's important to look good.
It's the look. Looks.
Motorcycle is a hobby, so it is a matter of how much you are satisfied with it. This item solves this problem, and it does not improve the performance at all.
If the OEM engine plug is too hard to remove, apply a Large thicker and harder Washer and turn it between the pliers.
As everyone says, it's expensive, so at least put an O-ring on it.
View detail
Cost-effective
[How is it used?
I am playing Enduro race etc. with HUSQVARNA TE250I.
The other day, when I washed my car after practice, my Uni-flow cap was missing, so I bought a ZETA Uni-flow cap.
Previously HUSQVARNAOEM, but this time we chose the readily available ZETA product.
Was the installation difficult?
The rubber part was very hard, probably because it was winter time, and I couldn't fit it right away without changing it.
I warmed up the rubber part with Dryer to soften it and put it on. Even after warming it up, it was still difficult to fit it in, but I put it on with a lot of effort.
After attaching, wrap Tie Wrap around the base to prevent it from falling off, just in case.
View detail
Left Side is Refreshing
Joint is Rubber, but because it is tightly made and stiff, it is tough to install without removing the Air cleaner cover.
There seemed to be no worry about it coming off that way, and the appearance was quite Refreshing!
View detail
Looks and functions at the same time
I think it is good for the price and has a luxurious feel. View detail
To prevent mud clogging
I bought the Chain after seeing someone with a Chain that was stuck in the mud and disconnected.
I think people who often rush into mud as well as Dress-up should purchase this product.
View detail
Fits: KAWASAKI D-TRACKER X, KAWASAKI KLX250
Diversion to SUPER SHERPA Protection effect realized
Installed on SUPER SHERPA.
It is for KLX250 but just fits to the handlebar clamp width of KL250 Sherpa.
However, the mount bar is covered over the Choke Lever in the OEM position, so the Choke Lever cannot be pulled out.
The installation of the bar rise kit has also eliminated any problems with hose and cable routing.
I am satisfied with the Wind protection effect on highway driving.
View detail
Windproof effect is increased.
I installed ExplorerWindshield on my CL500 and love it.
Purchased LargeScreen for additional wind protection
70mm upward and 60mm larger in width.
The windproofing effect has been improved, so Standard Screen
It's good for people who are tall and concerned about Wind Cutting noise.
However, in my case (Height 171cm) The top edge of the Screen is exactly at eye level when you are sitting down.
It bothered me so much while driving that I went back to Standard Screen.
Just taller as above. (180 cm or more) Then I think the top edge will be slightly below eye level.
Combined with the windproof effect, I think it is satisfactory enough.
View detail
Fits: Others For handlebar without brace Handlebar diameter 22.2mm
Sufficient wind protection and good Design
[How is it used?
The purpose is to protect against cold during winter touring and to reduce fatigue when using high speeds.
Was the one you received as per Image?
When I put it on, it is not as large as it looks in the picture, but it is reflecting.
Was the installation difficult?
It can be installed with a single 4mm Hexagonal Wrench, and even beginners should have no problem if they assemble it in order.
How was your experience with it?
It is windproof enough to keep the body cool in winter, and high speed is easy!
The design is good, and the windshield tends to be tacky when it comes to windshields.
This product is Refreshing and looks great!
[Included Parts:were they on?
Quantity of RepeatThailand for fixing Cable when mounting electrical components on the Mount bar and a set of components required for installation.:2pcs included
[Was there anything that disappointed you?
Nothing special, just what I expected.
Large type is also available as an option, which is larger than the attached Shield.
I plan to replace it with a Short Type Shield in the summer because it is too much trouble to remove the bar!
I would like to request to Manufacturer that the Standard&Large type be made a little more downwards in the Large size. (50mm) I'd like to have something extended as much as possible.
Because the wind is coming from a slightly lower direction, the wind is coming from a slightly lower direction.
I look forward to your consideration.
View detail
Mounted on EC250
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
The Hose stuck in the Tank allows Gasoline to flow back into the HeadBike when it falls over.
In this case, grease around the Stem will drop, causing Rust and worsening Handling.
This cap is available in a lineup of different colors, and it is a good part with an easy customizable feel.
However, after two rides after installing it, it came off when I fell down somewhere or lost it.
I ended up buying a second one right away, also in tears.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 11mm diameter Brace
A tremendous degree of freedom of adjustment.
Bar handle on CUB + use here.
I was thinking a lot about making it look like RALLY50, and I realized that buying this would be the solution.
The simplicity of the structure allows for a high degree of freedom of adjustment, so it can be used universally for various types of vehicles.
However, in terms of size, I felt that the Large type Screen was better in both windproofing and appearance with a fancy look.
View detail
Fits: HONDA TRAIL125, HONDA CT125, HONDA CT125, HONDA MONKEY125, HONDA MONKEY125
Only full cover headlight guard available
As aslways Zeta hit it out of the park, the only light guard that actually covers the entire headlight with a piece of arcylic bolted to a nice alloy frame that enables unobstructed view of the headlight, but 100% protected. The others are just a bit of thin steel wire/tube that will not stop rocks or similar to hit the headlight. Installation was super easy !, also works with all the other Zeta/DRC accesories. In my pics you can see it with the Zeta ADV windsheild View detail