Reviews
Emblem
It was an easy job, as there was no modification to be done, just remove and attach the Screws! View detail
Kawasaki Zephyr 400/550 dress up badge. A MUST HAVE
fantastic dress up part for the kawasaki zephyr 400/550cc. my bike now looks complete with this badge and the build quality is amazing. if i could give it 6 stars i would. View detail
OEM400fourType Sticker!
[How is it used?
We also matched the Emblem along with the Tank paint job of the coveted Yong FourSpec.
Was the one you received as per Image?
I felt that the size was larger than the Image, but I think that's just how it is.
Was the installation difficult?
Alignment is very difficult due to the diversion of another car model.
I am especially nervous because I have failed once in the past and I assume it will be used for a long time, but it is difficult for an amateur to do so, so after the application from painting to pasting [Color] I asked PRO among PROs whom I can trust for Clear finishing.
How was your experience with it?
[Color] It is said to be a Material that can withstand Clear coating.
The durability is yet to be seen, but I don't think I will ever get tired of it because it is the Design of my dreams.
[Included Parts:were they on?
Sticker only.
[Was there anything that disappointed you?
Sticker at the time may have been like this, but the colors seem a bit cheap.
Please refer to the images etc. as Tanks of ▼Yon FourDesign are still rare.
View detail
BRC BRC Front emblem
Good for dress-up.
I want not only Black but also Red, Blue, and Yellow colors.
View detail
Besides Repair, it is an indispensable Item for Yong Four style custom!
[How is it used?
I bought it to make a Yong Four style Custom.
Was the one you received as per Image?
It was a little cheaply made, but generally as per Image.
Was the installation difficult?
It is easy to apply if you position it and make sure it is tight enough so that no air can get in.
How was your experience with it?
It now looks like a Yong Four. (Lol)
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
I haven't run in the rain, but it doesn't seem very water resistant.
It has been over 5 years, though, and so far we are still enduring.
If the engine displacement volume is small, it may look like a misinterpretation or an overstatement.
View detail
Fits: HONDA CB400 Fore (air-cooled)
Fuel Tank Mounting Rubber
The rubber parts are consumable parts, so I hope you can keep stable supply. View detail
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB350, HONDA CB750 Four(CB750K)
Blue Spring Memories CB250EX
I had a CB250EX when I was in my 20s, but after 40 years, I got nostalgic and kept looking for a good one I finally got my hands on this 1972 model
"MissionReturn spring needs to be replaced I got it knowingly, knowing that this was the explanation in advance However, this Spring has already been discontinued I managed to get the unused Spring stock at Oakshon overseas I removed the Clutch and opened the Right Crankcase Cover to replace the spring stock I had planned to have to, but the GEAR of Clutch outer and The GEAR on the Crankshaft side is a double layered GEAR with a gap of one tooth on both sides The Crankshaft side GEAR has the structure that the Oil Filter is integrated into the Crankshaft side GEAR In order to pull out the Clutch outer, the Oil Filter must be removed Remove the RotorCap and remove the RotorCap It is fastened with a Lock washer There are traces of it being opened before, and there are also dents from removing the lock nut with Graver at that time There is a large slotted screwdriver instead of a Graver Large slotted screwdriver is used instead of Graver according to its precedent Loosen the lock nut to the lock nut, remove the Oil Filter and Clutch, and aim "MissionReturn spring Finally, we meet at the I was able to replace it safely The last issue is the lock nut with the Graver mark on it I want to assemble a new Nut with tools, and although it is possible to get both Nut and Washer respectively, my problem is that they are not available Mr. We-Big! What a Quantity:Set Lock nut& for BRCClutch center; Lock washer It's available as a Moreover, it is cheap at 1057 yen The shipping cost is 380 yen all over the country, but this product is 250 yen because it is Small object of delivery, and the total cost is 1,000 yen I snapped it up for 307 yen and took the opportunity to clean the ClutchFilter and While making your own Crank Case CoverPacking from Packing Paper And wait for it to arrive Tightening it with Graver again is a bit of a trick, so I machined a 22mm SocketPiece Special tool for lock nut? I also made my own A few days later, Nut and Washer arrived earlier than I expected I installed Crank Case Cover Turned the oil and started the Engine Outlook Blue Spring Memories CB250EX has been revived
View detail
Easy to dress-up! Number two
With the change to Front FenderDown, you can easily dress the front end of the car-you can up
However, the 250TR is not a compatible model, so you'll have to get creative and make your own Stay
I used a combination of the following parts to hold the Emblem in place
[Additional parts]
Aluminum Bracket 20 Al-3 150mm
→Cut to 125mm because it interferes with the Emblem as it is
・KITACO Hexagon PillarM6×35 ×Quantity:2pc. Set
・Posh Faith Universal Collar Set (M6-t5) (Quantity:2pc. Set in)
・KITACO Aluminum spacerM6 (Outer diameter 11mm, thickness 3mm)
→Height matched with the same thickness as Horn's Stay
・M5Nut&Spring washer&Washer (Stock on hand)
I'm happy with the old car feel and the front end area has become more lively
View detail
Fits: HONDA CB350, HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Plating License Plate Bracket
I ordered Plating License Plate Bracket that used for HONDA CB350 F 72-74 because i like it very much, I am very pleased that it looks sturdy and strong View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP
Even with strengthening ...
Gasoline leakage at the time of full Gasoline Tan that can be said as a destiny of Z 400 FX ...
I bought it as a countermeasure attracted by the word of strengthening.
The result is that it does not change that it leaks when it is fully filled Tan (Lol)
For the time being, I was reconfirmed that it is the best countermeasure not to enter Tan so far.
View detail