Reviews
![[K TOUR] Rear Carrier](https://img.webike-cdn.net/catalogue/images/107660/80-539-11220_1_TS.jpg)
It's best
Because it is small in size, it seems difficult to lift luggage.
The quality is good and the overall balance seems good.
It creates a pretty look and looks better than when it was original.
It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat.
Thank you for the fast delivery. -------------------------------------------------- -------- Because it is small in size, it seems difficult to lift luggage. The quality is good and the overall balance seems good. It creates a pretty look and looks better than when it was original. It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat. Thank you for the fast delivery. Powered by Google Translator
View detail
Good looking stickers
Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
The best choice for waterproof bag storage
It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator
View detail
It goes well with the 2018 Crosscub.
There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big.
Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down.
-------------------------------------------------- -------- There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big. Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down. Powered by Google Translator
View detail
Chic Design Road Comet Fairing
The Road Comet fairing was perfect in every way, it was easy to fit and looks awesome. The 2 tone paint was absolutely spot on. Communication with WeBike was also very good. View detail
a perfect fit for a bike
very precise and sparkly It's easy to wear It would be nice if the prescribed torque value for the fastening bolt was written. The combination with "overracing subframe" is good My bike has become a little more shiny. View detail
We recommend fitting this product.
Think about the flat front, It's not cool without this 'kawasaki' bracket. You can remind others what kind of bike I am anytime, anywhere. The downside is that the horn becomes smaller. But don't worry, our riders won't use their horns. View detail
Genuine Yamaha Tank Pad (3 piece) for YZF-R1 2021
I have said this before and this is something every fuel tank should have on them from factory. Fortunately, no scratches to cover on this beautiful tank. No need to tempt fate so I just thought it best bet for now to get a tank pad. This will help stop any scratces and abrasions from the jacket etc. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. Fitting was straight forward and went on without issue. As this is a 3 piece tank pad, you should really mock up the fitting beforehand so you know where it will sit once you remove the backing. Easy if you take your time. No one wants to have a constant reminder that they messed up with a wonky set. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Item well packed!
Webike is one stop accessories shop for Motorcycle product. Especially the Magical Racing carbon! Ordered a Puig windshield for Gen 3 busa. Very fast shipment and product is authentic. View detail
Good
It has a curved shape. So it sticks well to the curved tank. It is similar in length to the genuine emblem and narrower in width. Since it is an optional product from the manufacturer, the quality is good!! View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
W-1741-058
I really liked how these nuts transformed my Honda Monkey and I decided to repeat this with my Honda Little Cub. The nuts fit perfectly except for two washers (the stem on the Honda Little Cub turned out to be wider behind the thread), I had to leave two washers old on the inside. I liked this purchase, I was satisfied with the experiment. As always, the products of this company are on top!!! View detail
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Nice chrome parts
It had a shorter tail than the original and a Lukatsu tail brake light, so it had a sense of unity, and it was nice to have all the additional parts to attach a license plate. View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Good because the price is low and no need to relocate Horn.
Buy this one while you're at it for a down fender in Mukawa.
OEM HONDA Emblem was installed.
Good price and no need to relocate Horn.
Product.
However, my 2023MODELMONKEY125 is
When the Mounting Bolt of the Horn is removed, the Headlight case and the
Remove the front Light as it is stuck in contact and cannot be removed.
Furthermore, remove the three Bolt fixing points of the Light case and put the Light case.
The Bolt was shifted slightly to remove and install the Bolt.
The instruction says to remove the Light case, but remove it completely.
There was no need.
This is a standard custom for DownBracket installation.
I am glad I installed it.
View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
![Traction Pad Street Bike Kit [VOLCANO]](https://img.webike-cdn.net/catalogue/images/103505/55-10-0055C_TS.jpg)
Second purchase of this.
This is actually the second time I have purchased this.
The first one peeled off after about 3 years.
I wanted something else from Japan but couldn't find anything that fit my 2014 GSX1300R HAYABUSA, so I bought the same one.
No complaints other than adhesive life.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA CUB press 50, HONDA LITTLE CUB, HONDA CUB press 50, HONDA LITTLE CUB
Difficulty in weather resistance
Why is it that everyone is so quick to exchange to NORMAL? I was wondering,
Now I know why. After about a year of storage under the eaves, the surface hardens.
ParisParis and tear it up.
View detail
![Seat Cover [SK-110V]](https://img.webike-cdn.net/catalogue/images/13570/32632935_TS.jpg)
Fits: KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom, KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
I miss the colors and design.
Good old-fashioned color and design. View detail