Reviews
perfectly (suited)
Perfect for your local Number!
The number is small, so it is not likely to be bent even if it was there much.
It is safe.
I'm putting up the Seal of the Shrine Amulet.
View detail
To one point!
I put it on because I wanted a change in appearance. View detail
Casual Accent but satisfying!
Balance of price and texture is good.
I wanted to match the color of the car body, so I am satisfied.
View detail
m8Bolt to Fashion.
The m8Bolt is Fashion. The price is low, and the luxury is good. View detail
Ideal for crime prevention.
This is no longer an exquisite product.
The combination of anti-tinkering Torx bolt and anti-loosening Nut is kind.
The design is simple and the color line nap is abundant.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
High Class Accent!
These Posh 24K bolts are small bits of quiet elegance, like fine jewelry. I am very impressed by the presentation! The price is a bargain! My Web!ke Japan feedback is 100% for product quality, speed of order processing and shipment. Keep up the great work friends! View detail
It has a sense of luxury.
Installed on PCX160.
It is quite luxurious.
Reflector is also satisfactory with good design.
View detail
Protection of SR400 License Plate.
I feel that the License Plate does not shake so much when idling. Also, I feel that the License Plate Holder and the License Plate are firmly fixed. View detail
impulsive buying
I saw it on social networking sites and thought it would be a good product to personalize Motorcycle.
We considered other Manufacturer's products, but because there were many users of this product, we purchased this one.
Spec. to be sandwiched in a circular Acrylic, so depending on the Ideas, it can be personalized with various Materials and Designs.
View detail
Security, looks, expandability
I wanted to include a Cali Sticker Plate, so I attached it to the local Number with the company's Torque screw 25mm and 6M× diameter 18mm× thickness 3mm Spacer, which is sold separately.
Note that the Wrench for the Torx screw (sold separately) has only one tinkering hole.
View detail
Hara1 Local Number only
We purchased this for our Hara1 local Number.
Fit the local Number with no problem.
We recommend that you measure the dimensions of your local number in advance.
Width is as in previous Impression.
View detail
Anti-theft and dress-up
I use it on all three of my motorcycles. It is a good anti-theft measure and also has a dress-up effect. Highly recommended. View detail
Better quality than OEM, and of course, more room for inspection.
The foundation bracket is made by Active (adapted from Type -1 Square).
With Bracket Reflector products from various companies. There is no product with a reflector of about 35x90mm." I combined the brackets by myself. As I had hoped, I was able to install this product of 35x90mm with Type -1 Bracket almost Exactly.
Stylish slim type is not bad, but I personally like this one because it is more assertive. OEM-like Size." I like the Red color, which is slightly darker than the OEM, and the Base is solid and highly textured.
Point also has less rounded corners than those made by KITACO.
In the past, when I tried to pass a vehicle inspection with Slim type, they measured the area, but of course, this product does not do that.
It is also quite durable and the Lens has not fallen off after 5 years of exposure to VTWIN vibration.
It is a modest but good Parts.
View detail
High quality and safe to use!
[How is it used?
Due to the aging of the OEM Cap Nut, we replaced it with a rust-free Stainless steel one as Repair Parts.
Was the one you received as per Image?
The quality is as good as the Image, and you can use it with confidence!
Was the installation difficult?
Anyone can easily install it as it is just a matter of replacing it.
How was your experience with it?
I don't have to worry about Rust so much anymore, and I don't have to worry about being exposed to the wind and rain.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
It is a pity that it is a bit expensive.
▼It is not sold as Single Item, but Quantity:1 Set of 2pcs.
I am in the middleQuantity:It is a delicate point because I have purchased 1 Set of 3pcs.
View detail
High quality and safe to use!
[How is it used?
Due to the aging of the OEM Cap Nut, we replaced it with a rust-free Stainless steel one as Repair Parts.
Was the one you received as per Image?
The quality is as good as the Image, and you can use it with confidence!
Was the installation difficult?
Anyone can easily install it as it is just a matter of replacing it.
How was your experience with it?
I don't have to worry about Rust so much anymore, and I don't have to worry about being exposed to the wind and rain.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
It is a pity that it is a bit expensive.
▼It is not sold as a Single Item, but it is a halfway quantity.:1 Set of 3pcs. is a subtle point.
View detail
The Bolt on the License Plate was about to rust.
The bolt that attaches the number seemed to rust, so we changed it to this TorqueTaperBolt & Nut Set.
I chose the color Silver so that it wouldn't stand out too much, and I'm glad I did, because it looks OEM-like, just as I wanted.
And, since our vehicle has a driver's recorder bracket that is co-tightened, the bolt length was a little longer than other products, but the thickness of the bracket was just barely sufficient to allow installation.
I have no problem with normal installation, but would have appreciated another 2mm or so longer.
The bolt installed on the car at the time of delivery is prone to rust, and it has a large area to prevent tampering? The Bolt installed on the car at the time of delivery is susceptible to rust and tampering, and has a large area to suppress the Number, so depending on the type of car, such as a single cylinder, the Number may be less likely to crack due to vibration? It may be.
View detail
Used instead of Fender
Fender is cut and used in Fender city because it splashes a lot.
There is a big difference between having it and not having it.
View detail
A Little Fashion
Since OEM Bolt is lame (lol),,,, it is a bit Fashion. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Maybe only the Owner can understand?
I think there is no difference even if it is said that it is this from the beginning, though only the Owner may understand. I am satisfied with Large.
Installation can also be done by beginners.
Recommendation
View detail
Anodized for fine-tuning of hand guard, rust-free
[How is it used?
We used it to fine-tune the CYCRA hand guard.
Yamaha cars are MASTER to avoid Hit because of Banjo on the outside.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
There is no problem just to pinch it.
How was your experience with it?
Since the product is Anodized, we hope it will not deteriorate.
Normal aluminum colors tend to cut-out and rust.
[Included Parts:were they on?
Color only.
[Was there anything that disappointed you?
There is also a length Lineup, which is just right because it is Anodized, but
It's a bit expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail