Reviews
Bounce Spring does not come on.
Design is Well, I guess that's about it." target
Personally, I like most of them, but I don't think they are very cool. Also, the flip-up spring, which can be used to fully open the seat after installation, which was available with the Normal seat, does not work with this seat. The plastic part of the hinge (integrated with the helmet box) was broken due to excessive force on the spring. So I had to replace the Helmet box at the same time as the Seat. The comfort is not as good as the NORMAL. It is claimed to be lowdown, but it is not so different from NORMAL. The quality is high. The installation is very easy. I think the accuracy is high and there is no wobble.
View detail
The construction is also excellent!
I like the design and the quality of the product. View detail
It stands out
I bought it for customization rather than for its intended use. View detail
Almost pontooned ??
Image didn't change as much as I thought it would. w
The seating comfort is about the same as OEMSeat!
View detail
It looks different!
It needs some fine tuning. I had a hard time getting the Screw to fit easily in some places, but it installed beautifully ?I love the design! View detail
I like Parenthesis.
[How is it used?
It's cool with the installation.
Was the one you received as per Image?
Yes
Was the installation difficult?
Fine tuning is difficult.
How was your experience with it?
Backrest is good.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Instruction Manual should state that the problem is that some screw holes need to be adjusted.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400
Purchased as Pillion Bar for GRA MAJESTY 400
The feeling of sitting in the seat is still quite safe and secure because the back is guarded.:It is made of Stainless Steel for strength and reliability. Installation was done by a motorcycle shop. View detail
awesome!
Received the product in a big box with extra protection! Just fitted this on my SR400 and now it looks cleaner than before! quality is good and its easy to install too View detail
OEM Exhaust System will cause interference.
I think it is a good price for a Fender Eliminator Kit, but the blinker interferes with the Exhaust System if it is not an Exhaust System Up Type. View detail
3cmLowdown Seat for PCX160? Is it really lowdown?
My wife's beloved PCX160, almost one year since we bought it, still 400km,
My wife is not very tall, so her footing is a bit awkward on the PCX, and when she stops at intersections, she has to stand on one tiptoe.
It seems to be a bit large in places where the Left Side of the road is slightly sloped when touring.
I tend to shy away from riding PCX on a regular basis as well,
If it had a little more leg room, it would be easier to ride. and
I was thinking about Lowdown, and while researching on the Net, I found that this Lowdown Seat improves the footing by 3cm, so I bought it.
If the footing improves by 3cm, I would be a sole sticky myself, before I took the delivered product out of the corrugated cardboard and put it on.
First I sat on OEMSeat by myself to check the footing, then I replaced it with this Seat and sat on it, but the footing has not changed,?
I tried again to change back to OEM, but the footing is still the same...,
I called my wife to try it, but she said it was the same.............she cried
I tried on a pair of Boots with a 3cm heel and the footing was better.
It says in the product description that it improves the footing by 3cm,
I'm sure WirusWin doesn't check the footprint of individual products.
In the notes, it says that each product is handmade, so there is a margin of error for each product.
Is that the result of this?
Is the product itself leather? Synthetic leather? The back of the product is labeled "Made in Fillipin".
Installation was easy, only took a minute or two.
The product itself is custom type and looks reasonably cool, but the seating is hard.
Is it because it's new? My wife says that I can't go out for a long trip with it........
The OEM is softer and better for the same footprint.
In the end, I returned to OEMSeat.
As explained in the explanation, this is only for sunny days, as there are also holes for ventilation and rainwater can enter through the holes!
Seat cover is also needed for rain when going on long trips or overnight runs.
If this is true, I would like to return it, but the included note says that under no circumstances can it be exchanged, returned, or returned Gold after it has been installed. That means I can't try it out with the footwear on, right?
I wish you would test the footing of this product before shipping and guarantee -3cm!
I was wondering what to do.
My wife said I should keep it in storage as a spare, I cried.
I wish webike would try this product if they sell it!
View detail
I'm not sure how long it will last.
I got a used FAZE with this Rear Carrier.
However, about six months after installing the rear box, I casually looked at the motorcycle and felt that the position of the rear box had been lowered, so I looked closely at the carrier and found that the base that attaches to the motorcycle body had been torn!
I understand that the vibration of the motorcycle will put a load on the base because there is no support from below due to its shape, but I never thought that it would happen.
And upon closer inspection, it seems that it was originally re-welded several times with the same symptoms….
I removed it as soon as possible and looked for another Carrier, but there were no parts (including used ones) that would fit the unpopular Carrier, which had already been discontinued for more than 10 years. However, there were no parts (including used ones) that fit the unpopular carriers that had already been discontinued for more than 10 years.
I could not imagine life without the Rear box, so I had no choice but to purchase the same product.
Currently, every time I get in and out of the car, I remove the rear box and check the base, but this is not good for my mental health, so I am thinking of having a local ironworker add a support from below.
The design and texture are very good, so this is the only disappointment.
View detail
The seat lock is hard, but overall I am satisfied.
We are 168cm 66kg with short legs and bought a new PCX160.
I knew I was on my toes at the time of the test drive, so I decided to buy it.
The product was not in stock at the time of order and took one month to be delivered.
The good:I feel like I'm 2cm lower, if not 3cm.
Satisfied that Helmet storage space is the same as standard Seat as described in ManufacturerSite.
Bad point:the rear is floating about 2 cm before applying Seat lock, but the lock is engaged by pushing hard.
I checked with the Manufacturer to be sure, but they said it is only a special order and that is normal.
Seat is still thin and buttocks are somewhat sore.
Overall, I recommend it because it holds Helmet storage space and improves the footing!
View detail
It looks nice and neat, but you won't be able to bring it into an authorized Dealer.
Installation was somewhat difficult and the Instruction Manual was confusing.
The angle of the License Plate Holder is adjustable, but of course it is mounted at the proper angle.
However, the fact that it is installed with an adjustable angle in the first place is itself a Color:They are going to be in a Gray state. (From authorized Dealer, Engineering Dept.)
After I installed it, I filled the hex Screw holes with Pate and modified them so that they are not adjustable.
I would not recommend this to anyone who wants to bring it to a dealer for repair, etc., because it will be a problem if you have to remove it after installation.
However, it is a recommendation for those who do not care about the appearance of the Rear Area, and for those who install it at an appropriate angle.
View detail
I think it is a good product.
Easy to install, stable, good product. View detail
Installation requires modification.
As shown in the product image, the OEM Carrier cannot be attached to the Flat, but the DoubleCarrier is attached on top, so it cannot be used in combination with the Second seat.
Even when not used in combination, the OEM Carrier interferes with the system, so modification was required to install the system.
View detail
I'm glad I put it on.
It took a little while to install, but now it is easier to ride with Knapsack on my back. View detail
Accuracy?
I put it on a Cb250r.2019MODEL.
The holes in the bracket that attach to the body do not line up with the screw holes in the body.
As a stopgap measure, we deformed it with Pliers and installed it.
Therefore, BlinkerLeft is slightly distorted.
I'm not that picky, so I'll just bite the bullet and go with it.
I am disappointed in this accuracy as I purchased it for $10,000.
Also, the Instruction Manual is a single sheet of paper and quite unfriendly.
I referred to the blog of a kind person who purchased and installed another company's product.
There will be no more Repeat of products here in the future.
View detail
Color does not match.
The colors included with the product did not match, so the front and rear were swapped and installed.
The texture and rigidity are very good. I am looking forward to seeing how well the texture holds up with use.
View detail
I think it's a good structure in terms of weightBalance
I have seen various reviews of this product by others (other sites) that say that a lightweight box is essential because of durability concerns.
However, this may be true for cars with poor balance, since each car model has its own method of fixing to the car body, but I think the position of the GEMMA's fixing part is a good structure in terms of weight balance.
I was relieved when I actually installed it. The welds look very sturdy.
As a result, we installed a 50L Large type box to improve the poor loading capacity of GEMMA.
The only dissatisfaction is the state of installation of the License Plate that was moved.
Vibrates with a buzzing sound during Idling.
I think there is room for improvement.-I will leave it at "1".
View detail
Compact and solid presence
The OEM Air Cleaner Duct was installed in a highly waterproof location, but because of this, when strapping it to the carrier, the duct cover was in the way and there were areas where it was not possible to strap it on. I bought the duct cover because it was too bulky and when I removed it, I needed to plug the hole where the duct had been stuck.
The size is about the same as an OEM DuctHose cut in half, so it's not obtrusive, but it's also fashionable with a subtle statement.
The Stainless Steel polish looks better on a Red body than on a Khaki body.
The installation process is simple, but I think it is relatively easy since it is a step-by-step replacement of the Air cleanerFilter.
The fixing method is a pot bolt on a flange nut, but I applied Screw lock to prevent it from loosening.
View detail