Reviews
Fewer options compared to CB1100
I purchased a CB1100RS Final edition, but the poor loadability is a Large problem that could lead to a decrease in my desire for Long touring. (This is my personal opinion.)
I thought I needed a rear box, so I started by looking for a current available carrier, but the OEM product was already discontinued during the CB sales period …HURRICANE had stopped accepting orders, etc. The only ones I could find were Endurance and Hepco, which are semi-OEM products. I found only Endurance or Hepco, which are semi-OEM products.
Once again, I felt the disparity between the recognition of the unbranded CB1100 and that of the late modelrs.
Personally, I liked the SMART look of the HepcoMini Rack better than the firmly design of the Endurance, but it's just too expensive.
…。
Also, the Painting was even and the welding was carefully done and satisfactory, but the accuracy of the installation seemed to be lacking.
Split Quantities:Pair (for Left and Right) After attaching the carrier bar to the body of the car, I put the rack plate on the car. (I almost got it by brute force.)
However, the fitted appearance is good!
The Seat is horizontally connected from the Seat almost horizontally, and it seems that even a large Seat bag can be used without any difficulty.
However, I have a GIVI that I unloaded from my previous Motorcycle and wanted to operate it! (at your own risk).
The Mini Rack has a few holes and gaps that can be utilized without modification. The weight capacity of the Mini Rack is up to 5 kg, so we will use it only to the extent that we do not put a load on it.
View detail
Moderate Large size
Installed in my wife's car 。 Bobber was chosen for its style, but he doesn't want to give up camping touring.
It is not large enough to hold a box, but I think this size is the limit for a Bobber style motorcycle, and it may be large enough to hold a bag. 。 Fixing to the vehicle body is done at the tips of the Parts and the Quantities near the PartsCenter.:Pair (for Left and Right) 4 locations in total at 。 The structure protrudes backward, and there is no support directly under the cargo area, so you can sense that it is not recommended to carry very heavy items. 。 In that sense, you shouldn't load a Box or anything like that.
I had it installed at the shop when I took delivery of my new Motorcycle, because I didn't want to damage it! 。 The structure around the PartsCenter is fixed to the reverse side of the Frame, so if I had done it myself, I probably would have damaged it somewhere.
View detail
Steady making
It is solidly made, and installation is easy by removing the Bolt from the Carrier.
It was easy to tighten the four bolts with the supplied Bolt.
The lower bolt is 13mm and the upper bolt is tightened with a Hexagonal Bolt.
45L Seat bag is a little bit small.
I flipped it over and installed it.
The fixation was done well.
View detail
Looks good
The Headlight Grill frpm Hepco&Becker I purchased arrived a bit deformed, squashed (happened during shipping to my destination?) Before installing it, i had to straighten it out to fit the headlight accordingly. All in all a solid piece and it looks good. View detail
Fits: KAWASAKI Z H2
Please purchase with your Motorcycle purchase!
I used a Tanax Mini Field Seat Bag in the extended state, and when I tightened the KSystemBelt, thinking that I didn't want the bag to fall or move, the Seat was stuck in the Bag and the Fastener handle rubbed against the Tail cover (Tail cowl) when it was extended and scratched the bag. I am sorry, of course, that I neglected to take measures to prevent scratches. Of course, it is my fault for neglecting to take measures to prevent scratches.
If you think about it, I think the Bag capacity was reduced by dizzying it and it didn't fit, and if you stuffed it in, the Bag sagged because it was too heavy, and as a result, it got scratched.
If you have the Speed Rack, you can attach it tightly with the capacity as it is. I put SHAD's Top case on mine rather than a bag, and it's comfortable. It is comfortable and a helmet fits in it. If you are an owner who can attach it to your motorcycle without carrying luggage on your back, I recommend you to buy it immediately.
It seems to be Large sturdy up and down and front and back, even if it rattles around on AsphaltRepair marks and bumps when used. The only thing is that the Quantity:Pair (for Left and Right) The Plate itself is heavy and solid.
The rest is Large sturdy if you are careful to run the Bag and Case and the weight of the luggage against the allowable load capacity.
I was struggling when I put on the Songe and installed it, and the Green paint on the Frame where it hooks in the front was scraped off.
View detail
I'm so glad I bought it!
I'm so glad I bought it!
Design and gravitas were also great!
I know that many people use Fender for DAX, but I was looking for something that I could change without changing it!
Recommendation! I'm glad I bought it because it changes the atmosphere a lot!
If anyone has any doubts, please refer to this page.
View detail
It was worth the wait! Recommendation!
I am very happy with the quality and design! The fit is great and I am amazed at the quality!
If you are wondering about buying it, it is worth buying!
View detail
Fits: KAWASAKI Z400, KAWASAKI Ninja 400, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja 400
Good product!
Very good product
Now you can shop without Helmet. ( ?????? )
Tools are required for assembly and hang to remove the Case.
Once Snap is inserted to the deepest position, the key cannot be turned unless it is shifted slightly toward the front.
I don't know if it is written or not because the Manual is English Version.
Other than getting a bit hooked there, no problems.
View detail
We don't have a lot of options at this point.
I purchased it along with the SIDE Holder.
We have been using GIVI for the Rear box and wanted a Carrier for Rear that was also compatible with the GIVI box, but there were no options.
I thought I would buy a Pepco box if I couldn't install a GIVI Base, but I was able to install it with the Small modification.
It is a 47-liter box, but it was installed securely.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S950
Installation One-touch
I bought it for my BOX, and since I don't do tandem touring, I thought this would be fine. The box is a GIVI, so I had to drill a hole to attach the base. View detail
Dress-up purpose.
Fixing is done by removing the OEMBolt from the Blinker Bracket and fixing in two places with the supplied bolt.
The headlight lens is in close contact with the headlight lens, so it will not gap up and down, but be careful if you are concerned about scratches.
View detail
Fits: YAMAHA Tenere 700 Rally, YAMAHA Tenere 700, YAMAHA Tenere 700 World Raid, YAMAHA Tenere 700 World Rally
Increased loading.
I like the Hold feeling of the load.
It is easy to load, and the many holes allow for subtle positional adjustments.
View detail
Fits: HONDA CBR1000 RR Fireblade, HONDA CBR1000 RR FirebladeSP, HONDA CBR1000 RR FirebladeSP-2
poorly made
It will not lock if you just hold the rack down from the top. It will not lock unless you tap it down. When removing the rack, I use the key to remove it, but it does not turn firmly, and I am worried that the main key might be bent. It is obvious that the installation was not checked on the actual vehicle after manufacture. If the car is driven without noticing that the lock is not engaged, it will lift up and come off. View detail
Carrier
It covers Bobber's problem, loading capacity.
Now you can go on a sleepover Touring.
The texture is good and sturdy.
Recommendation to Bobber riders.
I think the installation is easy since it is Bolt On, but I have asked my dealer to do it for me…
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Tandem Necessities
I had it installed by a dealer when I took delivery of my car, so I won't evaluate the installation.
I installed it because my wife and I often go out with Tandem.
As for the appearance, I think it is simple and does not stand out too much.
For a simple Neo-Class car like the Ninety, it would be better not to add extravagant, but for the convenience of the Tandem, I think this minimalist product is the way to go.
I've never tried riding in the back seat myself, but according to my wife "The height and thickness are good for grabbing." He said.
It also comes in handy as a temporary handhold when handling or hanging the maintenance stand.
If you want to load cargo when you tandem, you can use their Carrier. (Top case holder/PipeType) You can also consider the following.
View detail
Fits: YAMAHA MT-07
A quick turnaround?
It's really convenient for Solo camping. Just remove the Tandem seat and replace it with a large cargo bed. It is stable even if you put XL on it. The price is Neck, but if you go camping in 07, you can't leave it. View detail
Fits: TRIUMPH Bonneville, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100 Black, TRIUMPH BONNEVILLE T120, TRIUMPH Bonneville T120 Black
A quick dress-up
[How is it used?
I installed these on my BONNEVILLE t120 at the same time as the OEM Headlight visor.
Was the one you received as per Image?
There was no difference from the picture in the product description.
Was the installation difficult?
The installation itself is not particularly difficult, but the Headlight is installed in the Quantity:Pair (for Left and Right) Because it is necessary to remove the bolt which is fixed with the bolt, the optical axis will be shifted before and after installation. I adjusted it by myself somehow, but I think it is better to leave it to PRO if you are worried about it.
When I install it, I remove one Bolt, and cotighten this Guard, and then install Quantity:Pair (for Left and Right) and worked to prevent the Headlight from dropping out.
The instruction manual is written in English version and German, but the installation method is simple and there is an illustration, so you will not be lost.
How was your experience with it?
I don't plan to attempt a Situation where this Grill would be effective, but I chose it for the Visual aspect, and I'm happy with how it turned out as Image.
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: KAWASAKI Z650, KAWASAKI Ninja 650
It's a shame that it's the only one and there's no competing product.
[How is it used?
The Ninja 650 is hopelessly unsuitable for loading (there is almost no place to put a loading hook).
On the other hand, I don't want to put Top case on Full Cowl (personal view).
Tandem seat is heaped up in 2020 and later MODEL, so Seat bag is not sitting well.
I want to install my TANAXSeatShellCase, Field Seat Bag and Side bag easily.
I was looking for a product that would satisfy my selfishness of wanting to keep it as a regular Tandem seat when not in use.
Was the installation difficult?
Installation Instruction Manual is in German and English version, but you don't need to read it because of the number of parts and appearance.
All you need is a 4 or 5mm HexaWrench and a 10mm Spanner.
How was your experience with it?
The seat is wide and flat, so the load is stable, but the problem is the holes around it.
The only way to use the belt is to fix the hooks.
I wanted to use the KBelt, so I modified HookPlate2 and installed it so that I could fasten the buckle.
The Rubber feet on the rack are very easy to remove (I almost lost them many times), so you should glue them separately!
Also, the seat lock is too tightly made (you have to press down hard to close it).
[Was there anything that disappointed you?
It takes a long time to deliver because it is Made In GERMANY (this time, I ordered and waited about one month)
The concept of the product is good, but the price of 27,000 yen is Neck, because there is no competitive product.
You can buy an OEMSeat for $1,000 … at least in the low 20,000s.
View detail
The only Rear Carrier on CampingSpec.
Rear Carrier for the Triumph BONNEVILLEBobber.
The Title of the product is "Top case holder. It says.
This is incorrect, Top case is not installable.
(Even the description section of the product states as much.)
There are individual differences in the accuracy of the workmanship of the Carrier, and there are some units that cannot be installed smoothly.
The seat is fixed at the base of the seat and the FrameRear, four places in total.
The flat part of the Carrier is about 20cm in both length and width.
The largest load capacity is 5kg, and there is a seal of caution on the side of the carrier.
However, when you install the actual product, you can feel the strength that makes you think that it can be more than 5kg.
(Including myself, loading more than 5kg is at User's own risk.
I use this carrier to go camping with Henry beguine's Seat bag DH-745.
For a BonnevilleBobber with virtually no load capacity, the
It's almost the only option if you want to put a Large-granular Rear bag on it.
So, although it is expensive, it is a really nice carrier.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT-03
Not fit for 2020 MT03
No fit for 2020 MT03 which is different from description. Description show it is fit, poor product description. Waste. View detail