Reviews
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON SPORTSTER Family
Very good
This seat is very good. Not comfortable but nice look. 2007 Harley davidson 883r correct. I'm recommend this seat who nice guy. View detail
Fits: YAMAHA VIRAGO250(XV250), YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Absolute Perfection
This fuel tank literally fit up to my Yamaha XV250 in minutes, obviously once you've removed the old fuel tank first. Swap fuel filter assembly from old tank to new one was a snap and new tank fits on factory mounts and main bolt at rear. You'll need to buy some bolts and nuts to hold fuel pump and fuel switch as factory tank has threads in mounting points for those but this tank doesn't, no big deal though. Expect to lose some distance per tank as it's only about 5 litres but the look is worth the extra stops at the service station. Completely changes the look of the bike View detail
good
The seat was torn, so I bought it The appearance was quite different and good The quality is also good I just need to process it when I install it View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON SPORTSTER Family
Parts Shop K&W Custom Sheet Tuck Roll Type
Packaging came with damage box. Seat torn about 1.5cm Seat pan below oily and scratches. Very dissapointed and sad to receive it like above mentioned Sending dispute to Webike dtd 10-June-2020. View detail
Update on tank after 2 years... Worthless should send back my $ plus some..
DO NOT BUY THIS TANK !! ITS THE WORST EVERYTHING WELD HAS FAILED MORE THAN ONCE.THE METAL THEY USED IS WAY TO THIN AND WORSE THE FRONT MOUNTING POINT ON THE FRAME IS meant TO HOLD A LITTLE EVSP CANISTER .. NOW ITS HOLDING A 10LB GAS TANK.. UGG SO AFTER FIXING THE WELDS 3 TIMES NOW THE FRAME TAB BROKE OFF.. Oh on top of that the liner inside startd coming off almost immediately in little pieces and cloging the cheap petcock that started leaking I would stay away from any tank this company makes.. View detail
Fits: HONDA MAGNA(V-TWIN MAGNA), HONDA Magna (V-twin Magna), HONDA Magna (V-twin Magna)
Stainless Steel is
Mainstreaming at other manufacturers is Plating
This item is Stainless Steel
As long as you do not polish, you will lose the glow but feel safe without rusting
If you are going to use it for a long time, here is recommended.
View detail
The strength of the Bolt fixed part is difficult
The part fixing SeatRearBolt is the same as the resin on the back side (Seat back resin only extended length) So strength is not enough at all.
I was damaged at the time of installation.
Since I installed the Backrest Set with Rear Carrier, I can fix it in a pinched way so I managed to - - -
Even if it is installed properly it is certain that it will be damaged by running vibration etc.
It will be tough if you do not reinforce yourself by installing Bracket for fixing Bolt - - -
Seat itself, given the price of sweet things, well satisfied.
Sitting comfort is inferior to OEM but it is not bad as it is.
(Although spodine will become hard due to aged deterioration)
View detail
Fits: HONDA Shadow Slasher 400, HONDA Shadow Slasher 400
Because the car model is a car model - - -
Purchased here because there was no other PosterTank for Shadow slasher.
It is full of handmade feeling, and it is waving, the decoration of the welding surface is bad, it takes time to delivery, so it is essential to fill the Pate after all.
It may be unavoidable to think about the price because the car type is Minor - - -
Once there is no leak, you can use it, but Pateetc. , Small It was a certain item that I had to work.
View detail
This tank is built well .. But it is just a stock peanut tank ( not a flat bottom tank has a tunnel) with some flat steel bent to match the mount holes witch is ok.. But the bus Prob is the liner inside .. my Thoughts is in Japan the is no ethanal in the
This tank is built well .. But it is just a stock peanut tank ( not a flat bottom tank has a tunnel) with some flat steel bent to match the mount holes witch is ok.. But the bus Prob is the liner inside .. my Thoughts is in Japan the is no ethanal in the gas because the because the liner line is coming off in little pieces and is a hitch to get out and clogs the petcock.. That's a bitch! So I would say skip it and make your own.. 2 stars.. View detail
highly recommend this kit it is what it is straight forward easy to use product looks chic, shipped very quickly you wont be disappointed.
highly recommend this kit it is what it is straight forward easy to use product looks chic, shipped very quickly you wont be disappointed. View detail
I ordered this tank for a Honda vlx600 same as a steed just the US model. Shipping was surprisingly fast, it only took 7 days to Las Vegas NV. Packing was great and everything I ordered was there. The over all quality and welds are good on this tank. It w
I ordered this tank for a Honda vlx600 same as a steed just the US model. Shipping was surprisingly fast, it only took 7 days to Las Vegas NV. Packing was great and everything I ordered was there. The over all quality and welds are good on this tank. It was a direct bolt on everything fit perfect, took me about 30 minutes to swap it all over. Very happy with this tank and the price. Definitely will be a repeat customer. I would give my experience 5 stars!!! View detail
Fits: YAMAHA VIRAGO250(XV250), YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
This tank is a precise fit and very well made. Tunnel is hand welded from 1.6mm sheet and the tank comes with an inner lining already applied. Pressure tested and no leaks. All the stock brackets fit perfectly and the petcock swapped across easily. The
This tank is a precise fit and very well made. Tunnel is hand welded from 1.6mm sheet and the tank comes with an inner lining already applied. Pressure tested and no leaks. All the stock brackets fit perfectly and the petcock swapped across easily. The bare steel finish was a little roughed up in places, but nothing a skim with body filler didn't fix in paint. Overall an excellent fit and makes a huge difference to the bike. View detail
On the first view it is a nice tank. It fites very good on the SR 500. One have to be cerafull not to get in touch with the oil filler cap. The main problem is, that the over all quality ist very poor. The tank was leaking. Luckily I checked this in adva
On the first view it is a nice tank. It fites very good on the SR 500. One have to be cerafull not to get in touch with the oil filler cap. The main problem is, that the over all quality ist very poor. The tank was leaking. Luckily I checked this in advance. The problem is, that the tank is sealed on the inside already. So welding the leaking spots destroys the sealing and new leanking spots come up. It is quite disappointing to see, that the quality is quite poor. As i ordered the tank from Europe, return shipment does not make sence due to the high costs of shipment. View detail