Reviews
Well, that's okay.
When using the OEMBlinker, a dedicated Bracket is required, and the additional cost is..,
The Exclusive Bracket is also somewhat unstable in its mounting position.
Well, I guess it is worth the price.
View detail
Regarding installation.
It is not Circuit use, so it is appearance oriented, but it has presence.
The only thing is that I have to use the screw holes in the Radiator carver for installation, but I can screw the Bracket in and use it as a bracket.
The Bracket is then screwed back on. When attaching a plastic cover on the surface, place a washer between the plastic cover and the surface to prevent cracking.
When I tried to work with it, the weight of the bracket caused one of them to come off. It took me about 30 minutes to get it to fit.
I don't have to worry about it. It's a foreign product, so it can't be helped. Also, since it is a screw hole of Radiator, it will be the first place to be hit when it falls over. In the worst case, the Radiator may be damaged.
It looks good, and I would buy it even if it were a little more expensive if it had the same features as the Frame Slider but closer in shape.
View detail
Can it be installed?
The previous installation of the same product did not meet safety standards, so we purchased and installed a new one. However, the STD Blinker cannot be used because the winker bracket has a single hole, so we made our own winker bracket using an Aluminum LAngle. Also, the number angle does not meet the new standard of Up40-Degrees or less from October 2021. The measured value was 55 degrees. This was also machined and installed. The License Plate Light is also visible from the rear, so it needs to be concealed for vehicle inspection. View detail
X-ADV Puch Long ScreenDark smoke
[Color] Clear、 [Color] I didn't like the two-tone black and dark smoke color, which has the X-ADV logo in the middle, so I chose dark smoke. The windproof effect is excellent, but Dark smoke is so black that you can hardly see the front.
[Color] Smoke without two-tone color or the best is [Color] I wish there was a color in between Smoke and Dark smoke.
View detail
Windproof performance is good
The lowest position is around the highest position of the OEM.
I felt dissatisfied with the OEM when driving at high speeds, but this one is comfortable and I can safely say that there is no wind.
The OEM's complaint is that the top edge distortion is Large, but this product is almost distortion-free.
However, even at the lowest position, the top edge is in the place where I want to see the road surface in my position, so it is not soberly disturbing.
It's a matter of getting used to it, but it's a modest hindrance.
No problem in Corner as it is out of line of sight.
Generally satisfied but difficult to judge if I can recommend.
Design depends on the person, but honestly, it is subtle.
View detail
Looks cool!
It looks very cool.
Installation is also easy once you grasp the hang.
As others have said, the resonance at 2000-3000 rpm is very uncomfortable.
The vibration Level of resonance changes depending on the degree of fine tuning during installation.
I will try to dodge the Songe and Rubber boards.
The long screen will change the wind flow and reduce fatigue from wind pressure at high speeds.
The change in wind flow caused wind cutting noises that had never been heard before.
figure (body) (Height, etc.) Wind Cutting sound due to wind concentrated on the top of the Helmet depends on the
It may get in the way when Income is used.
View detail
Wind protection with Fashion and Plus alpha
I installed it with the understanding that it was better than nothing, so the windproof effect was about what I expected and no problem.
It looks just fine.
Ease of installation is also one of the easiest.
The problem is the quality of the Base plate,
The paint looks good at first because it looks like a tipping or texturing process.
After about 2 years, rust has progressed under the paint and ParisParisParis peeling.
It is likely that the paint is applied to the cut Plate with no surface preparation and no rust inhibiting treatment.
Well, it's the part you can't see under Screen.
I ended up repainting it myself.
View detail
Distorted? I wonder.
I was torn between the ACRYPOINT Shield and the 3cm UP Puch, but the 4cm UP compared to the NORMAL would never fit in the Step WGN, so I chose the 3cm UP Puch, but there is some distortion.
I will use it now that I bought it, but I will probably choose a domestic ACRYPOINT next time.
Because even 3cm UP can't be loaded in Step WGN. lol
View detail
Cell Phone Protection
I bought the Short one so it only provides some wind protection.
Main is a cell phone blindfold & rainproof attached to Handlebar!
Main is doing its job well.
Variable Type is good but a little more Cowl? to
I think Motorcycle will look much better if it gets closer.
View detail
overhang
[How is it used?
Circuit 70% Touring 30%.
Was the one you received as per Image?
Design and texture are as shown in the Image, but the adhesive part is sticking out.
Do I have to cut this myself? I don't know how to use it.
Was the installation difficult?
Should I install it? I'm having a hard time.
How was your experience with it?
before use
[Included Parts:were they on?
Sticker and degreasing? Included Parts:, Instruction Manual
[Was there anything that disappointed you?
As I mentioned above, what should I do with the overhang of the adhesive side?
I don't know. I didn't install it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction Manuals in many languages are included.
It doesn't say anything about the overhang.
I'm worried about it.
View detail
The construction is simple and requires some ingenuity.
I chose this one because I prefer SIDE with Stages.
Installation Nut is an OEMParts 90179-05523. It is not included in the
You can use the OEM's Screen, or you can use the one that comes with the OEM's Screen.
I bought 4 of them at the same time because I wanted to deform and fix the Rubber.
The OEM has claws for hooking near the Mirror and Meter.
To remove it, Mirror must also be removed.
In contrast, this product does not have such a feature, making installation very easy.
On the other hand, since the fixation is not done at the front but only at the rear nut
The front of the Idling also makes a rattling sound when it is shaken by the vibration of the Engine.
As a countermeasure, we use harness tape, which is similar to cloth and leaves little adhesive residue.
The sound has subsided when I have spread it around the perimeter while adjusting it with Scissors.
Vinitae or something like that would be fine, but I think the Harness type would be better because the glue seems to melt at high temperatures.
Overall, it is good, but it would have been better if there had been claws on the front side to hold it in place.
View detail
Puch New Generation NK Screen
[How is it used?
Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy
How was your experience with it?
Effective
[Included Parts:were they on?
With Bracket
[Was there anything that disappointed you?
If you are concerned about the lack of waterproofness of the bracket part, OEMBracket is a recommendation.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Certainly around the Key cylinder, which is a concern.
The key cylinder area is unique to SEA BASS vehicles, not just GSX.
I don't mind if I only use the body key, but I thought I might damage the area around the key cylinder if I put a lock key or a helmet lock key, etc., so I bought this.
I think the Film that protects the plastic part around the Cylinder should be available as OEM, but it was not in Option.
I chose Carbon Style, but it is a bit? I chose Carbon Style.
On the other hand, I think it would have been good to use with color as an accent color.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03
The fatigue level is different.
The degree of fatigue after one day touring is different when compared with the case without Screen.
Because of the large screen, there is less wind hitting the upper body, and I felt it helped reduce fatigue.
It is hard for long distance highway, but I think it is enough for down road touring.
And the color. [Color] I love that it's Smoke so it doesn't detract from the design!
View detail
For effect.
With the included Double-sided Tape and Resin Rivet, even beginners can easily install this product.
Rivet holes are drilled in 4 places with 4mm
Double-sided tape is a small shape and I used more than 10 sheets to put it on!
The texture is a little different from OEM, so it looks a little different in color, so it may not be suitable for those who are nervous.
View detail
PuigDownForceSpoiler (Don't use on public road.)
[How is it used?
I bought it for the purpose of improving the stability at high speed driving and for dress-up when touring etc.
Was the one you received as per Image?
It was just like the image. Unlike the Chinese Wing, the design is very well thought out.
Was the installation difficult?
I'm trying to insert the M5Clip nut into the Grommet hole in the Upper Cowl. (Attached image #5) It was quite a struggle, … (I feel like I've been forced to screw in the mounting bolts.)
Other than that, however, it's relatively easy, as Puig's Youtube installation video is available.
In addition, we recommend you to prepare Cushion Tape separately because there is a possibility of scratching the Cowl when it hits the Cowl because the mounting bracket is of the Gold genus.
How was your experience with it?
It seems to generate 2.4kg/f of DownForce at 200km/h. I think it is slightly more stable when driving on public roads;
The black base color does not spoil the appearance and there is no sense of discomfort as it was originally.
[Included Parts:were they on?
There are no missing items, and the packaging is perfectly fine.
[Was there anything that disappointed you?
It does not correspond to Japanese Vehicle Inspection.
I think it will only be a racing part.
It doesn't seem to have been built with public road driving in mind.
View detail
Caution and confirmation required.
It is described on the product description page as puig-3684N for puig Front Fender Extension SVARTPILEN401, but the vehicle image is VITPILEN.
This product is compatible with VITPILEN.
Not only is the picture on the product description page wrong, but the model of the car is also wrong.
The puigHomepage in my home country was also wrong.
Again, puig-3684N is for VITPILEN.
Please note that the product description is incorrect as of October 2020, so please be careful when ordering.
By the way, the fitment model is for VITPILEN401, but I could install it to VITPILEN701 with no problem.
View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN401
Caution and confirmation required.
It is described on the product description page as puig-3681N for puig Front Fender Extension VITPILEN401, but the vehicle image is SVARTPILEN.
Is the image wrong? I bought it because I was going to use it on my Vitpilen, but the product I received was a thing that didn't fit with Fender's Line.
This item is considered to be SVARTPILEN compliant.
Not only is the picture on the product description page wrong, but the model of the car is also wrong.
The puigHomepage in my home country was also wrong.
Again, puig-3681N is for SVARTPILEN.
Please note that the product description is incorrect as of October 2020, so please be careful when ordering.
View detail
It fulfills its intended function to the fullest.
The OEM RearMud Guard on the HUSQVARNA VITPILEN 701 is not tall enough, so I diverted the OEM Mud Guard and Chain Guard from the brother KTM 690DUKE R.
Mud Guard height has been increased by 30mm, but it is still not high enough and splashes from the tire will fly on the rear suspension.
If you have a KTM 690DUKE R, I'm sure you're in the same situation, but installing this puig Rear FenderExtender 9900J will prevent the suspension from getting dirty and will have a positive effect on its life span.
As for the quality of the product, the front side that you can see is mud black, so there is no problem.
On the reverse side, there are still some BALI left on the periphery of the reverse side from the molding process, and it has a glossy finish, so there may be shrinkage from the molding process, or there may be a problem with the gold mold.
It does not match the quality of OEM parts.
The function of the product as a splash and mudguard is sufficient, but its cost performance is low due to the high gold price of the product. 。
View detail
windbreak effect
The wind protection effect is almost the same as that of the OEM.
The cuts that come to the front are dirty.
You have to polish it.
In the case of 2020, the bottom Nut is the Well nut.
You can use it by cutting only the Rubber part because it is not available.
Otherwise, there is no way to fix it.
It's common on New Models and years with Meter cover.
The old model can be attached as is.
There was no tacky printing of the 1400R in the photo.
The mall was not in there.
View detail