Reviews
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
W-1741-058
I really liked how these nuts transformed my Honda Monkey and I decided to repeat this with my Honda Little Cub. The nuts fit perfectly except for two washers (the stem on the Honda Little Cub turned out to be wider behind the thread), I had to leave two washers old on the inside. I liked this purchase, I was satisfied with the experiment. As always, the products of this company are on top!!! View detail
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Nice chrome parts
It had a shorter tail than the original and a Lukatsu tail brake light, so it had a sense of unity, and it was nice to have all the additional parts to attach a license plate. View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Good because the price is low and no need to relocate Horn.
Buy this one while you're at it for a down fender in Mukawa.
OEM HONDA Emblem was installed.
Good price and no need to relocate Horn.
Product.
However, my 2023MODELMONKEY125 is
When the Mounting Bolt of the Horn is removed, the Headlight case and the
Remove the front Light as it is stuck in contact and cannot be removed.
Furthermore, remove the three Bolt fixing points of the Light case and put the Light case.
The Bolt was shifted slightly to remove and install the Bolt.
The instruction says to remove the Light case, but remove it completely.
There was no need.
This is a standard custom for DownBracket installation.
I am glad I installed it.
View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
![Traction Pad Street Bike Kit [VOLCANO]](https://img.webike-cdn.net/catalogue/images/103505/55-10-0055C_TS.jpg)
Second purchase of this.
This is actually the second time I have purchased this.
The first one peeled off after about 3 years.
I wanted something else from Japan but couldn't find anything that fit my 2014 GSX1300R HAYABUSA, so I bought the same one.
No complaints other than adhesive life.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA CUB press 50, HONDA LITTLE CUB, HONDA CUB press 50, HONDA LITTLE CUB
Difficulty in weather resistance
Why is it that everyone is so quick to exchange to NORMAL? I was wondering,
Now I know why. After about a year of storage under the eaves, the surface hardens.
ParisParis and tear it up.
View detail
![Seat Cover [SK-110V]](https://img.webike-cdn.net/catalogue/images/13570/32632935_TS.jpg)
Fits: KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom, KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
I miss the colors and design.
Good old-fashioned color and design. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Large satisfied
Installed in CHALY.
It needed a little modification for the CUB, but it is quite good for a little flippant shopping.
View detail
Easy to install, but ???.
Installation is easy, and the design fits well with the car body without any discomfort. However, I think that the reflector should be included from the beginning since ACTIVE also manufactures a reflector. View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
[Color] Smoke Screen
Installation was easy, even for an amateur. With a good density, (in Tokyo) I could see in front of me even at night, the Large size was just right, and the wind hit me not hard at all at 100km/highway cruising. View detail
trial and error
Only Bracket is purchased to install Separator.
Since it cannot be installed as it is, it was processed secondarily. The Stem Steel Emblem is not installed.
Please note that this is not normal usage.
View detail
Fits: YAMAHA WR250R, Others , HONDA CRF250L, KAWASAKI KLX250
Just the right length.
Although I have not had the pleasure of using it on forest roads yet, I tested the actual pull on Garage and found that the thing itself was easy to grip and firm enough to lift the Front. View detail
Famous Stack Belt
Product Name
TREKFIELD TrekField Stack Belt
Item Number
W-3208-P29696891
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because I wanted to put a Belt on the Seat to make it easier to move the body when Stacking.
Was the one you received as per Image?
It was just as shown in the Image. I can use this one without any worries.
Was the installation difficult?
It's not particularly difficult, since all you have to do is attach it to the Fork.
How was your experience with it?
The fabric seems to be sturdy, so I think it will be safe. I would also like to try it and see if there are no problems with this one. Also, other people are using it and seem to have no problem with it. I have high expectations for the future.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail