Reviews
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
W-1741-058
I really liked how these nuts transformed my Honda Monkey and I decided to repeat this with my Honda Little Cub. The nuts fit perfectly except for two washers (the stem on the Honda Little Cub turned out to be wider behind the thread), I had to leave two washers old on the inside. I liked this purchase, I was satisfied with the experiment. As always, the products of this company are on top!!! View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
Fits: KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Large satisfied
Installed in CHALY.
It needed a little modification for the CUB, but it is quite good for a little flippant shopping.
View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
trial and error
Only Bracket is purchased to install Separator.
Since it cannot be installed as it is, it was processed secondarily. The Stem Steel Emblem is not installed.
Please note that this is not normal usage.
View detail
After much waiting, it finally arrived!
Cool! I'm glad I put it on! ♪ (??????) ♪ View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Excellent Material
[How is it used?
I bought this CenterTank Pad to prevent scratches on the Tank.
I regretted that I bought it so early because I didn't put anything on it at first, so it was damaged at the Center just two months after delivery and the gloss was gone.
Was the one you received as per Image?
There is something needed for installation, so it can be attached easily.
Package is also Green type, so Kawasaki users may be pleased!
Was the installation difficult?
It is just like a regular Sticker because you just paste it.
But since it is a Center pad, it is useless unless it is attached to the Center, so it is better to Center out.
It might take that long. After that, there was no problem when I applied it while slowly releasing the air.
Universal Product, so it can be used for any type of car.
How was your experience with it?
It feels like a proper anti-scratch expectation.
Material is also cool and full of luxury.
At first I was going to use a GSX1300R HAYABUSA OEMCenter pad, but it's big in the middle. "GSX 1300 R HAYABUSA" I just wanted something thimble, and since I also use EasyGrip's Knee grip, I decided to go with this one, partly because I wanted to unify the two.
[Included Parts:were they on?
Sticker or Alcohol Tissue.
I find it very convenient because it has everything I need for pasting.
[Was there anything that disappointed you?
No, I don't!
Perfection
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I chose EasyGrip to avoid corroding the Paint with poor quality glue, which inevitably leads to sunburn and deterioration due to UV rays in inexpensive products that often ruin the texture. I believe this will never be a problem.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
I'm glad I bought it
[How is it used?
I purchased this product to prevent scratches after delivery, but the knee grip is more effective than the actual scratch protection.
I'm new to wearing a Knee grip myself, and I'm so pleased with the effect that I'm bummed after installing it.
Was the one you received as per Image?
First purchase of the famous EasyGrip
The delivery time was a little long, but I think it was worth the wait.
When I open a new one, it smells like Rubber from a shoe store, I like myself Large.
Material is soft and nice to the touch
How was your experience with it?
After attaching the grips, I tried riding the bike, and wow! The knee grips were great. I have always leaned forward, so it was hard for me to ride for a long time or to make a sudden break because all the weight of my body would be on my wrists. After attaching this product, my knees became the fulcrum and the weight on my wrists was alleviated, and my upper body felt lighter.
Also, even when cornering, the knees are firmly hooked, so you feel as if you are one with the vehicle, without slipping.
[Points to note]
When pasting, please be slow
If you do it in a hurry, you get a lot of air, which is not aesthetically pleasing.
How did it compare to other products?
I can't say I've used any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
My Motorcycle is pure White, [Color] I thought Clear would be the best, but EasyGrip's [Color] Clear is a bit with-color or yellowish, so it stands out even if you put it on a normal white motorcycle. So, I think Black would be more suitable for White Motorcycle.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
I'm glad I waited.
I really like the slightly rounded design.
The paint is beautiful. The installation went without a hitch,
As you wrote, I am changing Handlebar as well.
As a final step, we modified the Reserver tank bracket. The bracket that came with the tank could not be installed, so we had to bend it backward about 30 degrees from the center of the NORMAL bracket to get a good fit without interfering with any part of the tank. (Photo)
Satisfied with the overall solid fix!
View detail
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M
Main switch cover
It is always visible and easy to install and is a great first step for PetitCustom. View detail
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
KIJIMA Assist Carrier
The assist carrier feels like its a "stock" option of the z650rs, fits the bike perfectly. The paint on the metal is very similar to the frame of the motorcycle, though the welding can be improved, i notice some rough portions on the welded parts. Installing is easy and the diagram is clear.And to those who are wondering if the passenger will feel the metal on the side of the carrier, its not going to impede the sitting position of the passenger and can be used as grab rails, all in all, a good product. View detail
Asahi windshield windproof under repair crow model
"If you are a sports fan, you can enter your favorite sports name in the comments section below. If you are a sports fan, you can enter your favorite product name in the comments section below. It's hard..
This screen is unique and has a good appearance. Also, the picture of a small monkey on the transparent glass is very impressive. It seems to be a very good product as it has the advantage of being equipped with or without a windbreak cover.
View detail