Reviews
Circuit support
I bought it to run Circuit with MOTARD.
Gasoline spillage can be prevented in the event of a fall.
The aluminum bubbles are anodized and well designed.
View detail
Nice parts but
Beautiful piece from Over racing. Fits perfectly in place of the original cover. Gives a beautiful and slimming look. but unfortunately if you have a small saddle like me then there is a space between the cover and the frame. View detail
The surface is ….
I bought Black Gail and painted it myself, but the Surfacer was Large weird because there were too many bumps on the surface. I wish the QUALITY was a little higher. View detail
Fits: HONDA REBEL250, HONDA REBEL500
Gold [Color] About Smoke's Japanese Vehicle Inspection Correspondence
Gold [Color] I inquired about Smoke's Japanese Vehicle Inspection Correspondence.
As a result
The product you are inquiring about will fit your vehicle.
However, we do not have Japanese Vehicle Inspection Correspondence.
The answer was
We would be grateful if you would consider the above information.
webike responded with the following
I don't think Clear is a problem, but Gold [Color] It should be noted that Smoke is a light intensity that is not CLEAR for vehicle inspection!
Gold [Color] Please note that Smoke does not have the note It does not correspond to Japanese Vehicle Inspection!
View detail
neither good nor bad
Model YZF-R25
The three-layer construction is quite thick, and the Magic tape can be extended for universal use.
The size is a little large, but I think it is acceptable.
View detail
Fits: GASGAS EC250F, GASGAS EC300, GASGAS EC350F, GASGAS EC250, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA TE150I, HUSQVARNA TE250I, HUSQVARNA TE300I, KTM EXC-F250, KTM EXC-F350, KTM EXC-F450, KTM EXC-F500, KTM EXC150TPI, KTM EXC250TPI, KTM EXC300TPI, KTM XC-W125, KTM XC-W150TPI
Mounted on Beta RR2T
I installed it on my beta RR2T 250 which I always use for forest road touring.
During touring on forest roads, there will inevitably be situations where the motorcycle must be pulled up, and if there is no place to hold it, such as a stack belt, it will be very difficult to pull it up.
So I immediately purchased this product from ACERBIS.
It contains not only a Belt but also a collar and a long Bolt so that the Belt could be installed and pulled easily. This is a part that I don't like to use as much as possible, but it is a very useful part in case of emergency.
View detail
Mounted on EC250 MY2023
I bought this for my GasGas EC250 MY2023 which I always use for forest road touring.
When I ride on the course, I remove the headlight because it is a source of unnecessary trouble, and I ride my motorcycle with this Number Seal installed.
Since the headlight can be removed, there is no light unit, which reduces the weight and makes the handlebar feel lighter.
Also, it is a nice point that the unevenness of the surface is reduced compared to when Headlight was installed, making it harder for branches to get tangled in the woods, etc.
Also, it is a good point to be able to put a Number Plate on the Race.
View detail
Effective, but installation is time-consuming
The OEM RR suspension rear cover needs to be removed or cut. View detail
Accent
It looks different, but the work is a bit labor intensive.
It can be peeled off when you get tired of it, and it is a good price, although it needs to be degreased.
View detail
Used for Tank on Ninja1000sx
[How is it used?
The tank of the Ninja 1000sx is wide, so when touring long distances, the sitting position is inevitably shifted to the front. When I was riding Z650ABS, I used the same manufacturer's standard (black), but I was concerned about the floating of the glue, so I changed to SILICON this time.
Was the one you received as per Image?
Color is Color:It is so close to Gray that when attached to Black Painting, it looks like it is floating. It is not so bad once you get used to it, but I would have preferred a stronger black look.
How was your experience with it?
Functionality is fine. It has a firm knee grip.
[Points to note]
The location of the paste is unknown and must be confirmed on the ManufacturerHP.
How did it compare to other products?
I feel that the texture is not as good as the company's Standard, but it is supple and does not seem to peel easily.
Requests, etc. to Manufacturer
I noticed a lot of White paper dust on the product when I opened the product. Perhaps dust from clothes will also be a concern in the future.
View detail
Style is outstanding, but 、、、、
[How is it used?
The OEM Seat of Z900RS is famous for butt pain Seat, so we replaced it with DOREMI Seat once and the butt pain was solved, but it became a little high seat and the style was too bulky, so we replaced it with Archi Seat without bean paste and with Gel Seat.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The DOREMISeat had some rattling, but the Archi Seat was able to fit snugly.
How was your experience with it?
The texture of the outer skin is good, and the feeling of pressing with the fingers is also very sticky, so I used it with high expectations, but the footing was not improved much compared to OEMSeat, and the cushioning was not so good for the GelSeat included. I didn't get butt pain after about 2 hours test ride, but after a little longer ride, it might be painful. （I did not get butt pain after about 2 hours of test riding, but it would be painful after a longer ride (somewhat better than the OEMSeat).
[Included Parts:were they on?
Seat belt and tacks are optional parts.
I'd like to see it included as standard.
View detail
![Screen [CORSA]](https://img.webike-cdn.net/catalogue/images/52496/2428302_0001_TS.jpg)
The change in appearance is 80%.
NINJA400 (2023) I installed it in
OEM [Color] From Clear [Color] The Smoke gives a tighter appearance from the front.
The windproof effect on highways and windy days is I think I might have changed, if you ask me." It is a degree.
The texture is slightly cheesier than OEM as it is thinner.
In general, I think it's more than enough if you divide it into fashionable Items.
View detail
Fits: DUCATI 899Panigale, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Panigale (except 959), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
For ZX-14R 320Large diameter
If not Titanium, Stainless is sufficient, but it is not sold.
It would not be commercially viable to make the price low at Stainless.
View detail
Gorgeous.
I think it is the Large type among OEMOption and others.
Installation is easy, but there are some situations where it may get caught when getting in and out of the car because it is a large type.
Please consider those who have concerns about the high Seat height of the car.
View detail
Reticulated and luxurious
It functions well as a reflective tape.
It may be a little difficult to apply to curved surfaces.
View detail
It's a Universal Product, so there's no choice.
I would like to see a little more length, but the minimum area is covered, so that's good.
Even if applied properly, Air is hard to remain and has sufficient adhesive strength, but the color is not colorless, so Black may be less stressful.
View detail
Fits: TRIUMPH SPEED TRIPLE 1200 RR
Cheap ????.
The color may be translucent or Quantity:Pair (for Left and Right) The quality was disappointing for the difference in size and delivery time.
If you can afford it, buy it at a special price, it is a good one to prevent slipping.
View detail
The more you use it, the more you understand! he said.
The more you use it, the more you will know! I had a sore butt after 150km of touring, but the distance was a little longer than the OEMSeat and the pain was a little less (personal opinion). The footing is a little worse when stacked because of the thickness. Also, if you don't attach the strap, the tongue will look obtrusive. View detail
Price is Neck
Used to replace a sprocket on a first generation Ninja 250R.
Since we are replacing it with a beautiful black painted Sprocket
Lock nut also chose this product to provide a unified look.
It is hard to find a Nut that is Black in color and fits the diameter & Pitch.
I've checked Monotaro and other places, and they sell Black Nut, but the Pitch doesn't fit.
It can't be used because the diameter doesn't fit or something.
Therefore, we concluded that we can only use this product in effect, although it is a little expensive.
View detail
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail