Reviews
Perfect for XSR125
Mounted on XSR125
Smoked color is a nice touch!
Good wind protection effect.
Even a headwind will not hit your body and make you less tired.
I would recommend it to anyone who is beginning to think the wind is a bit harsh.
View detail
It is a solid making
When installing, it was a bit of a hassle to assemble the auxiliary fixture to remove and attach the Rear Fender, but other than that, it was easy.
It is well made and useful.
View detail
Fits: YAMAHA XSR125, YAMAHA XSR155
It is easy to install. highly effective
It is easy to install with a single hexagonal Wrench.
It can be firmly fixed with a turnstile.
Also works great with Blast Barrier on.
Even strong headwinds became easier.
The work takes about 30 minutes
Instruction Manual can be downloaded at ManufacturerSite, so you may want to study it beforehand.
View detail
Genuine Yamaha Tank Pad (3 piece) for YZF-R1 2021
I have said this before and this is something every fuel tank should have on them from factory. Fortunately, no scratches to cover on this beautiful tank. No need to tempt fate so I just thought it best bet for now to get a tank pad. This will help stop any scratces and abrasions from the jacket etc. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. Fitting was straight forward and went on without issue. As this is a 3 piece tank pad, you should really mock up the fitting beforehand so you know where it will sit once you remove the backing. Easy if you take your time. No one wants to have a constant reminder that they messed up with a wonky set. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
In my opinion, it's Psycho!
It was not for YAMAHA's XSR155. (For SEA BASS GSX) I was looking for a new product, but the red letter "R" had a good parenthesis, so I bought it and put it on the wall. I bought it and put it on the wall because it was red and the letter "R" had a good parenthesis. I'm glad I bought it! View detail
Just the right thickness
I purchased Black Type6mm.
It seemed very thin when I saw the actual product, but when I actually stuck it on, it felt just right.
I would appreciate it if I could purchase only Graphic parts.
View detail
HURRICANE HURRICANE Reflector
The product was as per the Image.
There will be a gap between the Number and the Reflector, so we do not recommend this if you are concerned about this. (It will look like it is gnawing out of the Number.)
View detail
Item well packed!
Webike is one stop accessories shop for Motorcycle product. Especially the Magical Racing carbon! Ordered a Puig windshield for Gen 3 busa. Very fast shipment and product is authentic. View detail
Good
It has a curved shape. So it sticks well to the curved tank. It is similar in length to the genuine emblem and narrower in width. Since it is an optional product from the manufacturer, the quality is good!! View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Screen
I used the OEM screws as they are, but the rubber was too stiff and the removal and installation was too large, so I would recommend getting a screen bolt. View detail
YZF-R25 is normal with this attached.
I have been painting cars for over 10 years, so I painted the Black Gel one myself. If you ask a store to paint it, I think it will cost you a fair amount of money, so I think Carbon is a good choice for normal people. I was more impressed with this than buying an exhaust system. It looks really cool! The only thing I am sad about it is that the Wound is easily scratched by stepping stones. View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
W-1741-058
I really liked how these nuts transformed my Honda Monkey and I decided to repeat this with my Honda Little Cub. The nuts fit perfectly except for two washers (the stem on the Honda Little Cub turned out to be wider behind the thread), I had to leave two washers old on the inside. I liked this purchase, I was satisfied with the experiment. As always, the products of this company are on top!!! View detail
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Nice chrome parts
It had a shorter tail than the original and a Lukatsu tail brake light, so it had a sense of unity, and it was nice to have all the additional parts to attach a license plate. View detail
I finally got there.
The MONKEY125 splashes mud on the engine, so I installed a down fender and looked at it, but it did not solve the problem completely.
So I was researching on the Net and came across this product.
Fit feeling is good. Drilling Double-sided tape was a little uncomfortable, so I Neodymium magnet, rubber type, 1mm thick. The adhesive was applied and installed on all joint surfaces.
There is no sign of falling off so far, but as an insurance measure, we have drilled a small hole in the side of the mudguard and connected the Brake hoseGuard to the mudguard with an in-hemp palm to prevent it from being lost.
I bought a good product.
View detail
To repair Exhaust System that has fallen over
A fall damaged AKRAPOVIC's Silencer
The outer Sticker was also damaged, so it looks like a wreck.
At first I bought an external UniversalSticker and stuck it on, but the size did not fit at all and Silencer itself was thought to be a fake lol.
I knew I needed OEMSticker and found it on webike.
I forgot to measure the size when I removed the damaged OEM sticker, so I measured the mark on the sticker and chose this product in the Large body size. The material is Aluminum or something like that, so if you make a mistake once, you will not be able to use it, so please make sure to align it properly before attaching it!
View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Large satisfied
Installed in CHALY.
It needed a little modification for the CUB, but it is quite good for a little flippant shopping.
View detail