Reviews
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
[Color] Smoke Screen
Installation was easy, even for an amateur. With a good density, (in Tokyo) I could see in front of me even at night, the Large size was just right, and the wind hit me not hard at all at 100km/highway cruising. View detail
Fits: YAMAHA WR250R, Others , HONDA CRF250L, KAWASAKI KLX250
Just the right length.
Although I have not had the pleasure of using it on forest roads yet, I tested the actual pull on Garage and found that the thing itself was easy to grip and firm enough to lift the Front. View detail
Famous Stack Belt
Product Name
TREKFIELD TrekField Stack Belt
Item Number
W-3208-P29696891
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because I wanted to put a Belt on the Seat to make it easier to move the body when Stacking.
Was the one you received as per Image?
It was just as shown in the Image. I can use this one without any worries.
Was the installation difficult?
It's not particularly difficult, since all you have to do is attach it to the Fork.
How was your experience with it?
The fabric seems to be sturdy, so I think it will be safe. I would also like to try it and see if there are no problems with this one. Also, other people are using it and seem to have no problem with it. I have high expectations for the future.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
SM LINEFender MD44 installed
As per the impressions of our predecessors, the MD38/44 can be installed without any body modification.
Reasonable price and VisualUp, no complaints!
However, in my case, I have prepared the following additional components
Spacer:6.2mm ID x 15mm OD x 6mm L (qty:4)
Bolt:M6 x 30 (qty:2)
Flat Washer:M6 x 22 (qty:4)
When MD38/44 is installed, the spacer thickness should be at least 6mm to avoid interference with the car body. The outer shape may be a little larger than 15mm.
It is fastened with 4 OEMBolt, but for some reason, Quantity:I also bought Bolt because each 2pc is a different length (my used one) and when I put Space on, the shorter one doesn't reach.
When tightening from the tire side, the bolt groove on the FenderBody is large, so the washer is also large. 22mm larger than the bolt groove will cause the washer to ride up.
For your information.
View detail
To commemorate a reservation to purchase a vehicle
I have reserved a 2024 CB650RECLutch.
Since I have some time left before the delivery of the car, I would like to prepare a few Option Parts that I can install by myself.
Back at home, I hurriedly went to webike to register My Motorcycle and search for Parts.
As a start, I found and purchased the OEMTank Pad.
OEMPartsSale was being held and I was able to purchase it at a lower price than the Dealer.
The product was in stock and arrived about 2 days after ordering.
The actual product proved to be a solid product, just like OEMParts.
The CB's Logo is also reliable.
However, I think that a slightly larger size would be more effective in preventing tank wounds.
View detail
![[Xess] Original Sticker](https://img.webike-cdn.net/catalogue/images/13108/3-t_00103_TS.jpg)
perfectly
He said it would be better if there were both round and square designs. But I am satisfied. View detail
Purchased for a Circuit run.
I bought Plain Weave Carbon, the mold with Tank is also good as it fits Exactly.
Less movement of the hips and lower back in Circuit driving and easier in Breaking.
Almost all of my Circuit buddies are installing them!
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
If only it were a little deeper.
The bottom is open so you can change the Oil as it is, but if it were a little deeper in terms of design, I would give it 5 stars. View detail
Installed on SEROW250.
It was possible to install if only the protruding part connecting the OEM Fender and Headlight could be avoided (I used a nipper to cut it off). (^_^;) (e.g. "I'll be back")
FenderRear also manages not to contact the vehicle body
Compared to the OEM, it is shorter and less susceptible to wind, and I feel that it has reduced dizzying when running.
Design was also MATCH with the car body and got tired of OEMSpec.
This is a Recommendation for those who have come to the site.
View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail
Cool?
For XSR (For SEA BASS GSX) I bought it because the color was Red and the design was good for Parenthesis. I tried to put it on anyway, and it went on surprisingly well. However, the two edges on both ends are angled, so they might come off. But I was satisfied with it in my own way, so I am glad. View detail
I put it on to keep the bugs away.
With OEMScreen, the insects hit my neck, so I wanted a slightly largerScreen and chose VS-14.
The objective was successfully achieved and the insects no longer collided with the neck.
It came with a warning to do the Cover when parking in direct sunlight, but honestly, it's a hassle and I'm going to try using it without it until I have a problem.
Is there a real problem or not...?
View detail
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
great seat cover
seat cover fit great and loops over each end of seat for easy installation. No matter how much stretching and how many staples I used, there's a couple wrinkles.The color looks good, but doesn't match OEM. It's a little darker.Lots of grip ! It took a couple days at the to get used to it. Night and day difference from stock.Use 6-8mm staples when you install or else it doesn't stick View detail