Reviews
Combination brakes vehicles require adjustment of adjusting bolt
Model 2BJ-CE47A requires a 5mm collar on the Right adjusting bolt.
It seems that the shape of the RightBrake has been changed with the addition of combination brakes.
View detail
Standard winter parts.
For winter.
I guess a stylish Visor is one thing, but I like the wildness of it, so I use the traditional Asahi's windshield.
It is a retro form that has been around for a long time, but it has actually evolved.
good point
The height is also high, so windproof performance is high.
The screen is made of polycarbonate, so it is sturdy.
●JUST the Blinker portion of the escape, etc.
It may be stylish when you see it now. I personally think it is a Japanese-made VESPA (laugh).
A bad point
Screen is easily scratched. →But to some extent, it can be removed with plastic stick cleaner or the like.
It was born in the Showa era and has been loved until 2022... I think the high compatibility and practicality of the CUB speaks for itself.
It is an indispensable part for CUB's winter spec.
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Custom Cloth Sauce
I replaced the OEM canvas cloth souce with a homemade leather souce.
Not only leather, but also denim would be fun for Sauce.
The angle of mounting is laying down in front of you.
At this angle, there is a windbreak effect, and the Handlebar is not taken out by the crosswind. The top speed has also increased.
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Sense is questioned while being highly effective.
I finally bought it as winter equipment. I was afraid that it would become a tribal style, but if I just add a little aperture to NORMAL, the Screen stands vertically and it doesn't become a tribal feeling too much.
If it's NeoRetro type and almost normal except wind shield, you can make it to your favorite style with pre-Slider-like austerity. Of course, if you build a ShrimpTail or a 3-stage seat, it will look out of style.
the right moment
It was easy to install, no tools needed except for the bracket on the handlebar.
Bottom line, the wind protection is as good as it looks, and even at cruising speeds of around 120km/h, the upper body doesn't feel the headwind. There is no reduction in speed due to increased resistance Large, and the performance is unquestionable. It was very effective to prevent fatigue during long distance touring in winter.
the bad part
This is not for those who are looking for a quick and easy installation. The brackets are made of Uniqlo plating, which seems to be vulnerable to rust, and the screen part is easy to be scratched, so be careful when installing it. The screen part is also easy to be scratched, so you need to be careful when you install it. And the cloth part is Paris when you buy it, so you need to be careful when you install it.
There is no regret to buy it as a conclusion though I arranged various things. Whether it will become a delivery man Spec. or a street Zocky, or whether it will be able to create a very austere VeteranRider feeling depends on the overall Style including this. In addition. "Asahi Windshield." Stickers are not included, and the "Af" Note that the BrandSticker of the current Asahi windshield called "The BrandSticker" is already just pasted on the Screen.
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Pre-Slider mood
Corona's Tank Bag, Tachibana's ChallengeBag, Asahi Fuho and other motorcycle goods that represent the Showa era. Unfortunately, the above two items have been discontinued, but the Asahi Fuho is still available.
There are some people who wear it in a special way such as Shinkansen or Regent, but it's cool to wear it here like a 70's pre-Slider.
There are no rules on how to install it.
Bend the windshield to your liking, and bend the Bracket to your liking to attach it.
The only thing is that the Handlebar is taken away by the wind when the windshield is mounted upright. The wind is rolled into the back of the windshield.
If you lay it down, it will protect you from the wind and not be agitated by the strong wind, and also increase the top speed.
Another way to enjoy the Asahi windshield is to customize the fabric sauce to your liking:emblem, paint, etc.
I made the Leather Sauce out of genuine leather.
You can also use Concho for the Screw that stops the Sauce and the windshield.
Let's play with Originality out.
View detail
There's no wind!
All in all, Level was beyond my imagination.
Installation is easy
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI NINJA250R
It looks good.
[How is it used?
I installed it and drove it for a day.
Was the one you received as per Image?
Very light and colorful. [Color] Very good with Smoke.
Was the installation difficult?
I was able to install it with a hexagonal LUNCH like the ones that come with assembling furniture.
It is a little hard at first, so you need to be careful not to lick the Screw.
Stick the hexagonal lunch into the screw and turn it half clockwise. And you can remove it easily.
When you remove the Screw, you should hold it down so that you don't drop it because the Mirror will come off immediately.
Now all you have to do is fit the Mirror you purchased and close the Screw.
How was your experience with it?
When I install it, it is a little bit ? bent. But I don't think it's a problem for Spec. If it becomes a concern or loosens, I'll put a rubber between them.
I thought it looked a little long before I bought it, but when I saw it in person I didn't care that much. It looks so much cooler now.
The windproof effect seems to be there compared to the OEM. I think you can feel the difference when you ride at high speed.
I bought it to change the look of the house and I am quite happy with it.
[Included Parts:were they on?
Body、Screen Cover、Instruction Manual
[Was there anything that disappointed you?
It is a pity that it rattles a little when it is installed.
Also, the Instruction Manual doesn't mention what tools to use etc., just remove the OEM and follow the same procedure. It just says.
It's not that difficult a task, so it's not necessary, but it would have been better if it had been mentioned.
View detail
Winter Essentials
In winter, I use it only in winter because the wind is cold as expected.
Silver banker, it is the strong windshield of Image which the grandfather puts on, but it is Clear type, so it is not that strange!
It's easy to install because it's like attaching a bracket to the Mirror.
good point
It has a high functionality as a windbreak, so much so that it is called the Asahi windbreak. It is very helpful in winter.
It's a clear type, so it looks more like a clear visor than a windshield.
It's not only cold, but it also reduces fatigue from the wind.
A bad point
I would like to refrain from using it in spring and summer because it is prone to insects.
I bought these Parts to protect me from the cold because I want to run long distances in the winter, and I like the way they look.
I will use it again next winter.
View detail
It prevents wind and improves fuel efficiency, but it is noisy.
It is relatively large, so it works well as a windbreak. Coldness in the middle of winter is improved. Fuel consumption is improved by about 10%. The price is reasonable. Unfortunately, it is too noisy. The vibration of bumps, etc. "Vocon. And it makes a loud noise. In addition, if you drive at the legal speed of the original 2 in the headwind, it will be quite noisy (continuous bass sound) in Helmet. View detail
Fits: Others 50cc-750cc for each company/Pipe handle
It looks nice.
As you can see in the product description of Manufactureretc.
It will definitely scratch the Handlebar.
This is a Recommendation for those who don't care about that.
Bracket is mainly iron.
If it gets rusty, it'll look good.
View detail
Just the right amount of size
Mounting Bracket is available in Quantity:Pair (for Left and Right) I am satisfied with the look and effect after installation to the extent that I take care to make it even etc.
Oh, I didn't like the fact that the CROSS CUB has mirror co-tightening, so I put the MONKEY125 on the CROSS CUB, but it works fine.
View detail
Fits: HONDA TACT, HONDA TACT, SUZUKI ADDRESS110, SUZUKI Address125
Vehicles equipped with DAYTONA's Screen are also acceptable.
Since I am installing a DAYTONA Screen, I am not using the Adapter that comes with this product, but using the Adapter that came with the Screen! 。 Therefore, I think that it has risen a few centimeters above the original installation position and the entrained wind has increased somewhat.
Even so, the effect of the Knuckle Visor is gratifying even if the wind entrainment is increased because the way to hit the wind is completely different when the hand is shifted to the outside while running. Especially since I use it for commuting. "Winter & Rain. I'm even more thankful for it because I use it in the worst situations.
However, if I say it is natural, it does not cover the hand like Hand warmer, so if I compare it with that, the effect of cold and windproof is inferior. This is good for me who is concerned about the appearance and hygiene!
View detail
Dress-up of the wild air cleaner box
Purchased for a break from the last OEMAir cleaner box with a resin feel.
It's just as I thought it would be, and it goes well with the Exhaust System's PlatingHeat Guard!
It is this product, but it makes three holes in the OEMAir cleaner cover and fixes it with Clip. So you will need a drill and a 5mm blade. However, it is easier to make the hole of Small size gradually large than to open the 5mm hole immediately. If you don't have a drill, I think it is better to ask Shop etc. to do it.
One thing I was disappointed with this time is that there was one BALI.
It's not cheap, and it's not a part you can put on and get rid of, but it's a nice dress-up and I'm happy with it!
View detail
Wide.
The look and feel of the design is very wide and the style is more parenthesis-like, and since it is an exclusive design, there is no need to process it. View detail