Reviews
I wonder if there isn't...
Although there was no indication of the number of pieces, the quantity is the same as for other manufacturers.:I bought it thinking that 1 Set of 2pcs.
I would have bought OVER if I felt like I was losing money at this price& for 1pc.
It's a real shame.
Well, I placed an additional order.
View detail
Unique in my country
Its nice that the shipment includes 2 stickers. Really completes the look i was going for. Sticks good, but you have to degrease very well View detail
Price per piece
I think it would be good for a small accent.
However, if you say it is self-indulgent, it is sold in one.
Quantity:I bought it because I thought it was a good price for 1 set of 2pcs.
Quantity:Pair (for Left and Right) If you would like to have a Quantity:2pc. Set need to be bought.
I didn't see that mentioned in the WeBig, so ….
I had no choice but to buy another one when it arrived and I only had one.
It's a two-step process.
It seemed a bit expensive.
The product itself is good.
View detail
If not fastened with Rivet, it will peel off.
I installed an Emblem-less Silencer, but it looked lonely, so I bought this Emblem.
Double-sided tape had been attached to the car, but the front side was peeling off due to the large amount of rain, so I drilled a hole and fastened it with Rivet.
It would be better to buy on the premise of Rivet fastening.
View detail
สินค้าสวยงาม จัดส่งรวดเร็ว View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400
17in. can be assembled on a Fender Fork with a mounting width of 145mm.
Mount position is deep and Rib thick seRear ni (For Sera) This part is useful when putting 17in. on Fork.
It will probably also work well when putting 17in. on Bevel or PANTAH's upright marzocchi.
Basically, Front Fenders for 17in. cars are often designed with a width of 150mm or more.
Therefore, it is very difficult to find a suitable Fender when installing a 17in. on a Cearni assembled with a Bracket of Span 205mm or less.
That said, if you build a for 18-InchesFender, which has a wide variety of settings in the 140mm range, on a 17-Inch wheel, the first thing you will not get is a vine.
Thankfully, this model by BEET is for 17-inches and 140mm wide, so it can achieve this purpose.
Design is nice Parenthesis. At my own risk, I can wear a FTire with a width of 120 with room to spare.
The disadvantage is the Duck Tail shape at the rear end, which is good for parenthesis and aerodynamic, and it is not a problem to use on ZEPHYR400. and Garbage will hit the cooler core.
It is a Moro sand cover seat in position. A return must be welded to the lower edge of the cooler to prevent damage from Core.
Personally, I would be more than happy if you could sell a MODEL without mounting holes.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400
It was worth the wait.
Almost two months since I ordered it, and it was worth the wait!
Oak Auction and other sites were selling them at or above list price, and Manufacturer's delivery time was 4 months or more.
I doubt that anything that says BEET style or BEETManufacturer product is true...
I still decided to wait for Fender, a reliable Manufacturer.
However, I was lucky enough to get it in half the time, two months, and finally my Motorcycle is approaching its ideal state.
The effect is that it changes the appearance of the product to a large one. It works. We are pleased to be able to offer this service.
The work itself is not particularly difficult, just removing and replacing the OEM front fender.
It is currently being sent out for painting and we will add photos when the painting is finished.
View detail
It's just a matter of looks.
Aluminum Diecast so you can see Oooh!" It's just self-satisfaction, but the slightest change makes me feel better, just like when a woman wears a new pair of Pierce shoes.
something a little "A sense of tinkering." 5 stars for the ability to produce
Minus one star for the price.
View detail
Anyway, Parenthesis good!
My wife was mad at me, but I'm very happy with my purchase! View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
The D trucker X was equipped. Attachment is very easy. It will finish, if it is as long as 30 minutes. Appearance was felt quite refreshed and became touch good. However, exhaust steam is in charge of a number play for a while.
The D trucker X was equipped.
Attachment is very easy.
It will finish, if it is as long as 30 minutes.
Appearance was felt quite refreshed and became touch good.
However, exhaust steam is in charge of a number play for a while.
View detail
It is a recommend with a parenthesis simply [ attachment ] and sufficient [ a design ].
It is a recommend with a parenthesis simply [ attachment ] and sufficient [ a design ]. View detail
Wow that's cool
After all, BEET is the best Parenthesis. Let's put it on. View detail
Good quality, but not seperate letters.
Quality and texture are good and I am sure they will last but it is worth noting that each of these BEET logos is printed on to a clear back ground and so each letter (B, E, E, T) and each logo is not seperate and when fitted you will have a rectangle of clear around the whole logo. In use they were simple to fit with some soapy water and very sticky. If looking for products you could buy together, there is another sheet of Beet stickers also on webike. There was no difficulty of installation, simply lift the sticker off the backing with a knife and apply. I used soapy water and something to push the air bubbles out. Very easy to worth with these are small. This set represents good cost performance and is comparable with other products, like the other Beet sticker set. To be fair for the money they are not expensive if you want a set of Beet logos. Its not normal that you can buy stickers from tuning companies like this so its great that they are available. As usual, shipping and packaging was excellent. Beet provided good original packing and Webike shipped inside a brand new collapsed cardboard box. Very good and solid so they arrived flat and undamaged. I have no concerns, cautions, or advice when purchasing, they are good value but you should just bear in mind that these are not single letters like an OEM Yamaha sticker, they are printed on a clear background. I would have preferred them seperate as the finished job would have looked better, hence 3/5 stars. View detail
Mounted on ZrX400
The product description only applies to the ZrX1200DAEG, but the ZrX400DAEG is compatible with the ZrX1200DAEG. (2008 year) It was possible to put it on to the
I don't like the warped design of the Screen, and I like the design of this one, which looks as if the OEM has been extended.
I also like the casual BEETLogo!
View detail
BTTE is still the name of the game.
[How is it used?
CBX, to do Custom.
From NORMAL, changed to BEET
Was the one you received as per Image?
BEET's, genuine product, as per Image.
How was your experience with it?
Line of 2 types of Black and RedOEM colors, with Tank, Seat Cowl, Tail I struggled so much to get out of the
Installation Point
Everything will be installed, painted, and recommendendation done by a specialty store, please!
View detail
Genuine BEET
[How is it used?
From NORMAL, BEET change
Was the one you received as per Image?
It is indeed BEET and genuine.
Was the installation difficult?
To install, simply remove and install the NORMAL
How was your experience with it?
It's still Cool!
[Included Parts:were they on?
We painted the OEM colors, Type 2 Black and Red, at a paint shop.
[Was there anything that disappointed you?
Not at all
[Opinions and requests to Manufacturer
Painted
We would like to have it in OEM colors.
View detail
fastest
I don't hate this feeling.
The moment I saw it, I was so impressed that I snapped it up.
View detail
For Dress-up
The position of the bolt did not match, so I drilled a hole with Drill and adjusted it.
I bought a collar from Home center that was longer than the one that came with it and installed it because there was a gap between it and the Seat.
Bolt and collar are included, so even an amateur can install it right away.
Just be aware that the Pillion Bar for OEM cannot be installed because it is wider than OEM. The Pillion Bar that Father Tandem or Pretty can be installed.
I'm afraid it might break when I tandem it because of its width.
View detail
สวยงาม ถูกต้องครับ View detail
I was able to put it on without any problems.
I used it to hide Crack. It stuck without a problem. View detail