Reviews
Perfect Fit feeling
Originally purchased without Emblem, after 7 years, I wanted something different, so I considered and decided to install Emblem.
It's not a surprise, but it's a perfect Fit.
I am very satisfied with the way it looks and the way it fits perfectly.
View detail
A very simple windshield
Item came very well packaged. Its a very simple windscreen, similar to the Zero Gravity Corsa but lesser details and folds near the mounting points. Its a shade darker than Corsa's smoke. The height was also about 2cm shorter than Corsa. In overall, I like the overall look from Trickstar's windsheild. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Race ish look and windproof effect.
This alone gives a very different impression, and is very cool.
Windproof performance when lying down at high speeds can be felt quite well.
The large size of the screen may interfere with the view, but this is not a problem because the screen is below the line of sight.
View detail
I like the design.
It is also good that there are many size and color variations to choose from.
I don't know how durable it is in terms of fading etc., but I would be happy to buy it again at that time.
View detail
TricksterPowerIntakeDuct
After the change, I can hear the intake sound better than OEM, and I doubt the power increase is enough to be noticeable, but the intake sound is pleasant, so I'm happy!
It's hard to see Custom, but I'm glad we did it!
View detail
It is a good Material that does not slip
I am on a 2015 Initial ModelH2.
The hanging angle of the Handlebar and the tightness of the Axel were causing strain on my wrists, but I thought that my body slipping too much on the Seat and clinging to the Handlebar might also be a cause of fatigue.
The material is embossed, and it provides a good grip.
View detail
no problem
K-FACTORY's Fender Eliminator Kit requires a separate reflector, but the company's product was expensive, so we chose this relatively inexpensive and stylish product. We were able to install it without any problems. View detail
PowerIntakeDuct
After the installation, I felt that the intake sound became a little bit more ferocious, but I could hardly feel whether the power was increased or not. I tried it while changing the OEM mesh cover of the intake port, but I think the PowerIntakeDuct is neither good nor bad. LOL!
I had a hard time installing it because the holes did not match up with the holes in the OEMParts and the Exactly.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
MeshGuard for PowerIntakeDuct
I like the Parenthesis with the glimpse of Trickster's One point. the OEM is Black, but I think the change to Silver gives the Duct more presence. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
If you consider the cost, it's a huge profit, but if you think about it, it's Premium.
The installation of the Ram Air Duct itself is not so much simple as it is a self-fulfilling testament to the fact that the OEM opening has been modified instead of the PowerDuct made by Trickster. It is a true symbol. View detail
To hide the wound of Tank.
I put a Small scratch on the Tank.
I hid it with Sticker…
CoolSticker as much as possible.
I searched and found this product.
It's hard to tell what Size feels like.
I'll post a picture.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Design is good, but texture is not so good
Air IntakeDuct and Quantity:This is a product that is intended for Set use.
Inevitably, this will be used.
The thickness is very thin, the same as the Punching board at Home center.
The Manufacturer logo is also a bit cluttered when viewed from behind, and I think the cost performance is a bit poor.
Also, the double-sided tape is used for the mounting method, but I wish they had devised a better method for that as well.
Air IntakeDuct is responsible for the performance.
View detail
Sound has changed. Horsepower is...
There seem to be a lot of people in the 25R area who have it on, and I bought it to experience the difference in sound.
Horsepower isn't a concern for me right now.
Tuning is done by Computer at the stage of completion of this kind of custom set.
We will leave it until then.
The sound certainly changed and became a little more powerful. I am fairly satisfied.
However, the sound change is more than the increased intake Image.
The resonant sound of Duct's Body seems to have become Large.
It can only be enjoyed at low speeds.
As for horsepower, I pulled it down to Peak power.
Both Normal muffler and AKRAPOVICRacing line
We have not felt any change.
With the AXIS Lapo, it seems to blow up just a little smoother.
I am not too sure. On the contrary, there is no Minus factor at all.
Regarding installation, the Instruction Manual seems a bit clunky.
It is difficult to have a problem because the object is simple, but in the case of more complex objects, it is difficult to have a problem.
Is Large sturdy with such a flippant explanation? I felt that it was.
For example, if the Tape is to be placed in a position where Leave a gap here." It is stated that
It doesn't say anything about how much space you're going to leave available, nor does it say anything about numbers or objectives.
The image is hard to see because the gaps are painted over with a thick red pen, and the
It is said to be an OEM well nut diversion, but in reality it may not be possible.
(You can remove it, but you have to push it in to reattach it next time.
(The strength and elasticity of the material is unknown, so forcible insertion may result in damage.)
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Simple and Cool!
I think this is a good Design for Simple.
It's not a very conspicuous place, but I think people who know it will recognize it.
View detail
I don't think you'll notice the effect on city driving...
I don't know if I increased the horsepower or not. The intake sound is a little larger than before. It took some time to remove the cowl, but it was no problem. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Normal.
Trickster's Air ductGuard is not much different from NORMAL when installed.
It is not noticeable because it is in the Duct section. But I am self-satisfied.
View detail
Purchased in conjunction with IntakeDuct replacement
Purchased with the introduction of PowerIntakeDuct.
Attach to the inside of the Front cowl with Double-sided Tape.
Slightly misaligned, interfering with Cowl...
I fine-tuned the Double-sided Tape to be thicker.
If anything, Color:It is a Gray color and stands out more than OEM, but the texture is good and I am satisfied.
View detail
Increased air intake efficiency
The diameter of the outlet and the connection to the cleaner box is clearly wider than the OEM. I can visibly feel that this will increase the intake airflow….
The installation itself wasn't that difficult, but you do need to remove the Front Cowl as well.
If you don't install it at a good angle, the intake port of the front cowl (Inside) and Duct's mouth interfered.
I referred to youtube videos and other sources, but I don't think anyone specifically mentioned interference, so it could be individual differences or …wrong installation……
The intake sound is much louder and more powerful. It is a good sound. I love it.
It also feels like it has more power blowing up to ~10000 RPM. In general, I am satisfied with Large.
Now I need to replace the Funnel and Filter to complete the intake system.
View detail
Increased horsepower is very attractive, isn't it?
The volume seems to have increased a little.
I'm not Racer, so I don't know the rest.
I don't have a Rapid and my exhaust system is AXIS labs...
View detail
It's a must for PowerIntakeDuct.
It is indispensable because it is a governor after installing PowerIntakeDuct without this. View detail