Reviews
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Good because the price is low and no need to relocate Horn.
Buy this one while you're at it for a down fender in Mukawa.
OEM HONDA Emblem was installed.
Good price and no need to relocate Horn.
Product.
However, my 2023MODELMONKEY125 is
When the Mounting Bolt of the Horn is removed, the Headlight case and the
Remove the front Light as it is stuck in contact and cannot be removed.
Furthermore, remove the three Bolt fixing points of the Light case and put the Light case.
The Bolt was shifted slightly to remove and install the Bolt.
The instruction says to remove the Light case, but remove it completely.
There was no need.
This is a standard custom for DownBracket installation.
I am glad I installed it.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA MONKEY125, HONDA CT125
Main switch cover
It is always visible and easy to install and is a great first step for PetitCustom. View detail
SP Mukawa Grab Bar
MONKEY125 is very easy to handle.
The Grab Bar makes it very stable to maneuver when getting off the car.
SP Mukawa's Grab Bar has an OEM texture and is recommended for those who prefer Normal style.
Installation is easy if you follow the instructions.
View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Effective in rainy weather and midsummer
[How is it used?
In use on NMAX 155.
When I ride in the rain, the seating surface gets very wet, so a friend of mine recommended that I purchase one.
Was the installation difficult?
It's very simple
Simply follow the instructions in the Instruction Manual to cover the Seat and fasten the back of the Seat with Magic tape.
The markings are also provided so that the front and back will not be installed backwards.
How was your experience with it?
I got lucky (?) the day after I installed it. It was a rainy day, but it worked!
The ride was comfortable with no uncomfortable wetting of the seating surfaces.
The improved ventilation will also reduce the heat of the Seat in mid-summer, which we will experience a little later in the year.
There is no movement of the mesh cover during driving, which is good.
[Was there anything that disappointed you?
It's not a disappointment, but I can't wipe the Seat without removing it each time, so it looks like it will get dirty inside if left unattended to some extent.
Perhaps due to the Belt fastening at the back of the Seat, closing the Seat now requires more force than before.
View detail
Fits: KAWASAKI Eliminator SE, KAWASAKI Eliminator
It's as solid as the driver's seat.
When I Tandem with my son, he told me that his buttocks hurt, so I decided to buy it.
Like the driver's seat, it is firm and Cushiony, so it is effective Large.
There was a word of mouth that it was difficult to remove the RearSeat, but please refer to a YouTube video that shows how to remove it.
View detail
Fits: KAWASAKI Eliminator, KAWASAKI Eliminator SE
It's solid
The fabric is more solid and cushiony than I expected.
It seems to work well for medium to long distance Touring.
View detail
SP Mukawa CenterCarrier
Purchased for SUPER CUBC125.
ExactFit to CUB with Refreshing Design.
There are carriers with extravagant designs, but this product is simpleis the best and well-made.
I think the price is a little high, but I agree that it is a Brand.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
The quality of the product itself is good.
It is fastened with a string.
If you tighten the strap in the wrong direction, it may tear.
When tightening the strap, be careful not to tear the opening.
The cushioning has improved and the quality of the product itself is good.
I would like to recommend it to anyone who feels burdened by fancy, genuine sheets.
-------------------------------------------------- -------- It is fastened with a string. If you tighten the strap in the wrong direction, it may tear. When tightening the strap, be careful not to tear the opening. The cushioning has improved and the quality of the product itself is good. I would like to recommend it to anyone who feels burdened by fancy, genuine sheets. Powered by Google Translator
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB110, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA CHALY, HONDA DAX, HONDA CD90, HONDA CD50, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA GORILLA, HONDA MONKEY, Others , HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA LITTLE CUB
Easy Dress-up
I bought it to replace the rear shock absorber.
One point can be fashionable.
When using this product, the washer that comes with the Rear shock absorber may or may not be used, so it is necessary to read the Instruction Manual.
Rear shock absorber in the photo is SP Mukawa Rear shock absorber Black 06-04-0152
This one product contains 4 Nut.
View detail
Rear Fender Guard for CROSS CUB
I am satisfied with the ruggedness of the back.
There were more places to loosen Bolt than expected for installation.
Attempted to install KIJIMA Tail lamp guard 203-140 at the same time, but it interfered with the guard, so modification was necessary.
Need to cut the lower part of the Tail lamp guard.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
Fast delivery of perfect product
Thank you for the quick delivery, excellent quality, and packaging.
During installation, it was possible to easily search without product processing or unnecessary steps.
Comfort was provided above all else when worn.
Of course, the style has been improved and it looks clean.
Due to the nature of consumables, there is room for additional purchase ------------------------------------------ ---------------- Thank you for the quick delivery, excellent quality, and packaging. During installation, it was easy to search without any product processing or unnecessary steps. Comfort was provided above all else when worn. Of course, the style has been improved and it looks clean. Due to the nature of consumables, there is room for additional purchases. Powered by Google Translator
View detail
Grab Bar that doesn't break style
I was torn between silver and black, but I chose black because the frame is black and I thought it would give a sense of unity.
I have to move about 5m back to get my MONKEY out of my garage. I was worried that I might knock it over if I move it backward while holding only the Handlebar. By attaching this, I can lower the handlebar by holding the Handlebar Left and Grab Bar, so I don't have to worry.
as ... as one can Installed." I don't want to do custom like that, so this Grab Bar is ideal.
View detail
Fits: HONDA Monkey 125, HONDA Monkey 125, HONDA Monkey 125 Thai model
Takegawa is indeed well made.
At first I was using Honda's OEM carrier, but I was told that it could not be used with Takegawa's back support, so I purchased this product. The first one I ordered was black, but it was canceled due to delivery failure, so I took the plunge and bought the more expensive Plating. I chose this item because I wanted to put a Large size box on it, but the frame is obviously thicker and more secure. I am not happy with the fact that the screws did not go to the Rear Fender effectively after shifting the Rear Fender because I am not very good at it. View detail
Nothing to say. Best for my CT110 HUNTER CUB!
To make the CT110 HUNTER CUB with Travel Spec. the side bag is the MAST, so the first step is to install the side bag support. If you install the side bag without it, you will be in trouble, so be sure to install it.
Since the RODCase to hold the fishing rod will also be attached, we decided to avoid a large type and chose this compact support that fits compactly in the Rear carrierCenter or so.:Light in Aluminum, so the car bodyQuantity:Pair (for Left and Right) It is helpful because it helps to reduce the weight difference~. If not, the Left Side will be heavier with Bag and RODCase, and the Right Side will be lighter by replacing the Exhaust System.
Installation is very easy, just remove the OEM Bolt and use this product in the Quantity:Set and tighten the attached Bolt with the specified Torque. Yes, it is ready to use.
Compact, but it does the job properly, doesn't interfere with RODCase, best FitSize to secure the storage bag with Cargo Net in it, nothing to say.
View detail
The texture and strength are perfect.
Since the female hole on the body side is painted, the screw was so tight that I thought the screw might have been gnawed when tightening the bolt that comes with the bolt. I applied a small amount of Thread Compound and tightened the bolt just to be sure.
Large and sturdy construction. There is no doubt about the quality of the product.
View detail
The rear rack design perfectly matches the original styling of the Honda Monkey
About quality and texture - The rear rack from SP Takegawa is made from pieces of steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The rear rack design perfectly matches the original styling of the Honda Monkey and a rear rack is the first option you should consider when you are looking for some storage space. Products to buy together - A key product to buy together with the rear rack is a rear box that will allow for the easy and trouble free mounting of a box as they are designed to work perfectly together but do take away from the styling, so one that is easily removed and installed would be desireble. Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the rear rack is no different. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the rear rack, I chose sea freight as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View detail
The design makes use of a space that does not take away from the looks of the Monkey 125
About quality and texture - The side bag support from SP Takegawa is made from pieces of steel rod with precision bents that are TIG welded together and painted with a black surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The side bag support design makes use of a space that does not take away from the looks of the Monkey 125 like the front carrier does and is the best option when you are looking for additional storage space over what the rear carrier can provide. Products to buy together - A key product to buy together with the side bag support is the 2-way multi bag also from SP Takegawa that will allow for the easy and trouble free mounting of a bag as they are designed to work perfectly together. Difficulty of installation - The installation of the side bag support is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the side bag support to the frame. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but for the side bag support this is not the case as their product is much better in value this time round. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the side bag support, I chose sea freight as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L, HONDA MONKEY125, HONDA CT125
The simple key area becomes luxurious!
I put it on ja65, it's not hard to do, just stick it on with Double-sided Tape.
Since it is a type that covers the key cylinder, it looks more luxurious than one that is attached to the surface (laughs).
I chose Gold because there is also a Gold color around the Front. It gives a sense of unity and makes me feel good!
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
With this 4, I can also think of bean paste as a sweaty person!
[How is it used?
I have bought and installed it before, and mine is an indispensable Cover!
Was the one you received as per Image?
Yes, it was exactly as shown on the Image.
It's easy to use, no heat, no shift.
How was your experience with it?
I installed it and ran it immediately.
I was afraid that the seat height would be raised since it is to be placed over the normal seat, but I had no problem.
[Points to note]
The size is a little bit limited, or rather Exactly, so I added it while pulling it out.
No movement after installation (no Gap), no problems, and I'm sober.
How did it compare to other products?
I bought only this product without comparing other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Takegawa side bag support for Honda Super cub C125
It is somewhat expensive, but its neat & high quality contrasts with other Chines-made products. It is quality that doesn't disappoint. Thanks, "Webike" View detail